The Zero Back Pain Project has started! We are looking for sponsoring companies that can help us promote the project together!

Weighing only 3.4 kg! A power-type assist suit that can be utilized in a wide range of industries.

"Support Jacket Ep+ROBO" assists independently with the angle of the waist using motors on both sides. Sensors detect the wearer's movements and automatically assist the necessary parts. Since the left and right motors operate independently, they can respond to all body movements. **Features of the Support Jacket Ep+ROBO** - Weighs only 3.4 kg: Designed to be fixed around the pelvis with a waist belt, so the wearer hardly feels any weight on the shoulders. - Automatically switches between three modes: 1. Assist Mode (Rising Assistance) Detects the action of lifting objects with sensors and assists in lifting the body using motor power. 2. Keep Mode (Forward Bend Assistance) Assists in supporting the body during tasks such as lowering objects, working in a crouched position, or maintaining a forward-leaning posture. 3. Walking Mode Automatically switches during movement and does not hinder walking. - Easy adjustments with a button at hand Each mode can be adjusted in three levels with a single button. 1. Assist Button: Adjusts the assistance strength for rising. 2. Keep Button: Adjusts the assistance strength for forward bending. 3. Speed Button: Adjusts the response speed of the device in assist mode (function to match the device's response speed with the working speed).

• Other safety and hygiene products

In a civil engineering site material yard, not only is material storage conducted, but also the frequent movement of trucks and heavy machinery, unloading, and the movement of workers. On unpaved ground, mud and ruts can occur due to rain, which may reduce work efficiency. Hyper CLT mats are civil engineering CLT materials that utilize wood CLT. By laying them in material yards or storage areas, a work space that facilitates the movement of vehicles and heavy machinery can be established while protecting the ground. They can be laid only in necessary locations, and relocation or repurposing in accordance with construction progress is also possible. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery. After use, they can also be utilized as temporary roads, access routes, or heavy machinery work yards. Additionally, they offer unique benefits of wood, such as glare reduction, noise suppression, and CO2 fixation. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," these wooden mats can also be used for environmental improvement in material yards and innovative public works.

Features: ● Equipped with Intel Core Processor (Series 3) ● Onboard LPDDR5 memory: up to 24GB ● Onboard UFS storage: up to 256GB ● 2.5GbE (2.5 Gigabit Ethernet): 1 port ● HDMI 2.1 (TMDS): 1 port ● USB 3.2 Type-A: 3 ports ● 10-pin GPIO: 1 port ● Power input: 12V DC * This model does not include an operating system.

Features: ●CPU: Intel Core Processor (Series 3) ●Onboard Memory: Onboard LPDDR5 (up to 48GB) ●Onboard Storage: Onboard UFS (up to 256GB) ●LAN: 2.5GbE ×2 (Intel Ethernet Controller I226-IT) ●USB: USB 3.2 Type-A ×2, USB 3.2 Gen 2x2 Type-C ×1 ●GPIO: 40-pin GPIO ×1 ●Video Output: HDMI 2.1 (TMDS) ×2, DP 1.4a (via USB Type-C) ●Serial Port: RS-232/422/485 (10-pin header) ×2 ●Expansion Slots: M.2 2230 E-Key ×1, M.2 2280 M-Key ×1, M.2 2242 M-Key ×1 ●Security: TPM 2.0 ●Power Input: DC 12–24V input

Features: ● Equipped with Intel Core Processor (Series 3) ● Onboard LPDDR5 memory: up to 48GB ● Onboard UFS storage: up to 256GB ● 2.5GbE (Intel Ethernet Controller I226-IT): 2 ports ● USB 3.2 Type-A: 2 ports ● USB 3.2 Gen 2x2 Type-C: 1 port ● 40-pin GPIO: 1 port ● HDMI 2.1 (TMDS): 2 ports ● DisplayPort 1.4a: via USB Type-C ×1 ● RS-232/422/485 serial ports: 2 ports ● M.2 2230 E-Key: 1 slot ● M.2 2280 M-Key: 1 slot ● M.2 2242 M-Key: 1 slot ● Equipped with TPM 2.0 (Trusted Platform Module) ● Input power: DC 12–24V * This is a model without an operating system.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without the application of heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.