GHS Quick Change Tool Holder by Toyokuni Engineering Co., Ltd. for accelerating tool changes and tool replacement, increasing the operating rate of mass production equipment.

Thread cutting die head

The threading die head is designed to produce precise male threads in a short amount of time. It can be used for regular type cutting, high-quality screws, left and right threads, cylindrical screws, and conical screws. For conical screws, trapezoidal threading cuts are suitable. It can be made into special shapes like others, and it accommodates both British and American standards. The exchange of the chaser and chaser holder can be easily performed. This allows for the production of a wide range of dimensions and types of screws, and setup changes from one product to another can be done in a short time. It can process materials such as steel, high alloys, copper, aluminum alloys, and non-metals. There are three types of head: miniature head, standard head, and large head, with the miniature head available in two types: station type and rotation type.

• Other machine tools

Screw rolling head

With simple exchanges within the processing range of the thread rolling head, it is possible to quickly roll various types of screws. Both right-hand and left-hand screws can be produced. The thread rolling head comes in either stationary or rotating types, and the appropriate type is selected based on the machine being used. The stationary type is a unit that rolls threads against a rotating workpiece. The head opens due to the machine's feed stop or an internal stopper. The closing of the head is performed either manually with a handle or by using a closing cam with a closing roll. For example, it is used attached to the revolver part of an automatic lathe. The rotating type is a unit that rolls threads against a fixed workpiece. The opening of the RAR type head is achieved by moving the closing mechanism backward. The closing is done by moving the closing ring forward. The opening of the RR type head is done by moving the closing ring forward, while the closing is achieved by moving the closing mechanism backward. For example, it is used attached to the sleeve of a processing device or the spindle of a sliding carriage.

• Other machine tools

Screw rolling attachment

It is optimal for screw rolling processing from the axial direction. The screw rolling attachment is used mounted on a tool holder. Screw rolling processing can be performed on various types of machines such as single-axis automatic lathes, multi-axis automatic lathes, and NC lathes. The attachment performs screw rolling processing by pressing two synchronized rolling rolls against the workpiece through constant feeding from the cross direction. It can maximize the utilization of pitch, diameter, and shape. There are eight types of screw rolling attachments, which are tools capable of processing screws with larger diameters. Using Wagner's patented tools, such as types B14, B16, and B19, yields the best results. Especially for very small screws, it is necessary to perform rolling on the axis as weakly as possible. Wagner's tools can roll with a minimum step of 0.02mm.

• Other machine tools

It enables mirror finishing of the workpiece with the vanishing processing unit during the machining process on the automatic disc. 【Video available】

By mounting this unit on automatic lathes, we achieve improved surface roughness within the automatic machining process. No special machinery is required. The surface roughness improvement process using BAUBLIES' roller burnishing is highly reliable, fast, and easy to handle. It can be easily integrated into your existing automatic machining processes. Not only does it improve surface roughness, but it also enhances surface height and is expected to improve wear resistance. In the roller burnishing process, there is no material consumption removed as chips. Therefore, it can improve the yield of material consumption. Roller burnishing economically achieves improved surface roughness. The cycle time required for processing is short, and it provides high surface roughness quality. Advantages: - A mirror-like surface with unevenness within 1μm - High material distribution that effectively covers the sides (less wear against consumption) - Reduces the risk of cracking through micro-notching - Improvement in corrosion resistance due to resistance.

• lathe
• Other machine tools
• Plastic processing machines (cutting and rolling)

In civil engineering sites, the use of sheet piling methods is essential for safely utilizing the site, including temporary roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates have been widely used, but due to their weight, they can be cumbersome to transport, install, and remove. Hyper CLT sheet piles are civil engineering materials made from wooden CLT for civil use. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to handle with small machinery, contributing to reduced burdens during installation and improved work efficiency. They can be utilized in a wide range of civil engineering sites for measures against muddy conditions, ground protection, heavy machinery scaffolding, and ensuring pedestrian pathways. As a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism NETIS "TH-250021-A," it is also recommended as a material for innovative ideas, safety measures, and environmental considerations in public works.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, there are many instances where temporary roads, access routes, heavy machinery workspaces, and material storage areas use ground plates. Traditional steel plates are heavy, requiring large machinery for installation and removal, which can make work difficult in narrow sites. Hyper CLT ground plates are lightweight civil engineering CLT materials made from wooden CLT for civil use. A 5×10 plate weighs about 230 kg, and a 5×20 plate weighs about 460 kg, making them easy to handle even with small machinery, thus reducing the burden of transportation, installation, and removal. They are easy to use in sites with limited space or where the use of large machinery is difficult. They can be widely used for temporary roads, heavy machinery scaffolding, pathways within the site, and material storage protection, contributing to glare reduction, noise reduction, and environmental consideration. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," they are also recommended as materials for innovative ideas and safety measures in public works.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!