Notice of Participation in the 5th [Kansai] High-Performance Ceramics Exhibition

These are conductive ceramics that can be tailored for specific characteristics, ranging from mΩ (milliohms) to GΩ (gigaohms) depending on the application.

Ceramics are materials that excel in mechanical properties, balancing wear resistance (hardness) and strength, and are widely used in our products, such as suction transport nozzles for surface mount machines. Generally, ceramics are electrically insulative (materials that do not conduct electricity), but in recent years, there has been a demand for conductive ceramics in semiconductor and electronic component manufacturing processes and the electronics field for static electricity countermeasures. To meet such needs, we have developed our unique conductive ceramics.

• Contract manufacturing
• Ceramics
• Fine Ceramics

Porosity up to 98%! It is a metal porous body with excellent air permeability!

It is a porous metal material containing numerous pores like a resin sponge. Each pore is part of a continuous bubble structure, allowing fluids to pass through reliably. Additionally, compared to plates/blocks, the specific surface area is improved by several hundred times, making it suitable for use as a reaction layer or filter. Examples of applications (consideration cases): - Components for fuel cells (gas diffusion layers, separators, electrodes) - Reaction electrodes - Catalyst supports - Filters (air filters, grease filters, etc.) - Components for factory automation (adsorption plates, adsorption transport pads) - Medical field applications (artificial joint components, bone regeneration treatment materials)

• Metal bearings
• Contract manufacturing
• Other metal materials

It is 3D printing processing of ceramics! It is possible to directly manufacture ceramic parts from CAD data!

Ceramics 3D printing is a new technology for shaping ceramics using a 3D printer. By applying the ceramic molding materials (filaments) developed by our company, three-dimensional shaping of ceramics is possible with a typical FDM (Fluid Deposition Modeling) 3D printer.

• Other molds
• Contract manufacturing
• Processing Contract

It is a catalyst for ozone decomposition that supports ozone treatment.

The ozone decomposition catalyst, NO honeycomb, is an air purification filter with a catalyst attached to a ceramic honeycomb. Ozone (O3) has strong oxidative power and is used for applications such as sterilization, virus inactivation, deodorization, and decolorization. However, due to its oxidative power, it is toxic to organic matter and can have harmful effects on the human body at high concentrations. To utilize the characteristics of ozone safely, our NO honeycomb is used as an ozone decomposition catalyst, which breaks down ozone into oxygen molecules (O2) and oxygen atoms (O) through the action of the catalyst. The sterilization and virus inactivation treatment using ozone is gaining attention.

• Processing Contract
• Other polymer materials
• Wood products

It is a ceramic honeycomb filter that decomposes and absorbs air pollutants such as NOx/SOx!

The air pollutants contained in combustion exhaust gases from vehicles such as automobiles, NOx (nitrogen oxides) and SOx (sulfur oxides), are purified using the acidic gas absorbent "NC Honeycomb" developed by our company. Our NC Honeycomb decomposes and absorbs NOx and SOx through catalytic action, thereby suppressing air pollution caused by combustion exhaust gases. It has been adopted in the exhaust systems of tunnels in the metropolitan expressway.

• Processing Contract
• Other polymer materials
• Wood products

It is a ceramic honeycomb filter that deodorizes, removes smoke, and purifies the air using platinum catalysts.

Platinum is a catalyst used for purifying automobile exhaust gases, with features such as: - High activity (promotes reactions more effectively) - Excellent durability Our oxidation catalyst, NA honeycomb, is a filter that has platinum catalyst attached to a ceramic honeycomb. By using a honeycomb structure and support body, it achieves purification treatment with platinum catalyst at low pressure loss and high efficiency.

• Processing Contract
• Other polymer materials
• Wood products

Ultra-fine honeycomb structures of the world's smallest class. They are manufactured using a molding method with extrusion and can also be applied to thermoplastic resins.

Micro-honeycomb is a fine lattice structure formed using extrusion molding molds that leverage our fine hole and fine groove processing technology, exceeding 10,000 cells/in². We have a wide range of production achievements with various materials, including: - Ceramics (alumina, zirconia, etc.) - Metal materials (stainless steel) - Filler-containing thermoplastic resin materials Since it is produced using the extrusion molding method, which continuously discharges uniform cross-sectional shapes, it is also possible to manufacture integrated parts exceeding a length of 200mm. In addition to the production of honeycomb structures using our owned molds, we also accept new designs and prototypes starting from mold production, as well as external sales of molds only. *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• Other molds

In addition to square, hexagonal, and octagonal grids, we also accommodate irregular shapes! We will design molds according to your preferences.

At Nagamine Seisakusho, which provides a wide range of ultra-precision molded products using microtechnology, we handle "precision honeycomb extrusion molding dies." Honeycomb structures have the advantage of significantly increasing the contact area for fluids while minimizing pressure loss. We can accommodate not only square, hexagonal, and octagonal grids but also irregular shapes. We will design the mold according to your desired grid shape and molding machine. 【Design Specifications】 ■ Hole diameter: Min. φ0.8mm ■ Groove width: Min. 0.05mm ■ Pitch accuracy: ±10μm ■ Hole diameter accuracy: ±10μm ■ Groove width accuracy: ±10μm *For more details, please refer to the PDF materials or feel free to contact us.

• Mold Design
• Contract manufacturing
• Processing Contract

A nozzle with a hole diameter of 200μm or less, which is not commonly handled as a standard product. The tip is made of ceramic, so it can also be cleaned with solvents.

Our dispenser nozzle is a coating nozzle designed for tabletop dispensers, featuring a ceramic tip. 【Features】 - As a standard nozzle for tabletop dispensers, we can manufacture nozzles with a hole diameter of less than 200μm, which are not commonly available. (We can accommodate a minimum hole diameter of 5μm.) - The standard metal holder has a double-thread specification, allowing for direct attachment to commercially available dispensers and syringes. - The nozzle tip is made of ceramic, making it suitable for cleaning with solvents and thermal processing. (We will select materials according to the cleaning method.) - The inner surface of the nozzle has a tapered cross-section, produced through injection molding using molds, resulting in high smoothness and improved flow and coating properties. The inner and outer diameters of the nozzle tip can be manufactured to your specified dimensions. We also accept custom specifications for the metal holder. For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• dispenser

Introducing Chofune Manufacturing's "Ceramics Precision Micro Parts" and their features!

We would like to introduce Nagamine Seisakusho's "Ceramics Precision Micro Parts," which offers a wide range of ultra-precision molded products using microtechnology. Our company provides "IC Chip Suction Nozzles (for Surface Mount and IC Chip Transport)" that are compatible with the next-generation surface mount standards "03015" and "0201," as well as "Dispenser Nozzles/Inkjet Nozzles (for Liquid Dispensing and Droplet Ejection)" that can reduce wear even during high-pressure discharge. **Features of the IC Chip Suction Nozzle (for Surface Mount and IC Chip Transport):** - Utilizes fine ceramics with excellent wear resistance → Contributes to longer component lifespan and reduced nozzle replacement frequency - Minimizes machining by leveraging injection molding → Achieves low-cost and short lead time for mass production - Static electricity countermeasures are possible with conductive ceramic materials - Nozzles can be manufactured to match various mounting machines *For more details, please refer to the PDF document or feel free to contact us.*

• Contract manufacturing
• Processing Contract

Used for the exhaust outlets of the Central Circular Route Tunnel in the capital! It absorbs and decomposes exhaust gases and unpleasant odors.

The "Honeycomb Catalyst and Absorbent" responds to environmental conservation by absorbing and decomposing exhaust gases from sources of air pollution and unpleasant odors. Our NC honeycomb is widely used for ventilation in tunnels such as roads and for exhaust gas treatment in underground parking lots. It serves its catalytic function by allowing passage through the honeycomb structure. Since it is molded from our own extrusion molds, we can accommodate your requests regarding cell count, wall thickness, and size. 【Features】 ■ Absorbs and decomposes exhaust gases from sources of air pollution and unpleasant odors ■ Honeycomb catalyst that can neutralize acidic gases with alkalinity ■ Customizable cell count, wall thickness, and size according to your needs ■ Selection of catalyst materials tailored to your intended application is possible ■ We also accept prototype molding of materials you provide *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other polymer materials
• Wood products

This is a webinar that explains the basic concepts of nonlinear regression and practical analytical methods using JMP. We will welcome Mr. Fukushima, who is in charge of biostatistics at Takumi Information Technology and has extensive experience in the pharmaceutical industry and knowledge of statistical analysis, as our instructor. Target Audience: - Those who want to learn about nonlinear regression and understand it from the basics. - Those involved in data analysis in fields such as pharmaceuticals and manufacturing, who are interested in utilizing nonlinear models. - Those interested in data analysis using JMP and want to apply it in practice. Program: - Part 1: Introduction to Data Visualization and Nonlinear Regression An overview of the basics of nonlinear regression using non-clinical trials in the pharmaceutical industry as a subject. - Part 2: Features of Nonlinear Regression in JMP and Examples of Its Use in Quality Control An explanation focusing on the functions and features of nonlinear regression in JMP. ▼ Details & Registration https://www.jmp.com/ja/events/live-webinars/non-series/2026/06-25-nlr

[Key Lecture Content] 1. Promotion of Solar Panel Recycling Yuta Okazaki, Director, System Planning Office, General Affairs Division, Environmental Restoration and Resource Recycling Bureau, Ministry of the Environment 1. Previous efforts regarding the disposal and recycling of solar panels 2. Laws related to the promotion of resource recovery from solar cell waste 3. Q&A / Business card exchange 2. Expansion of Solar Power Generation and Formation of a Positive Cycle for Panel Resource Recycling Akihou Kawai, Analyst, Materials Team, Industrial Research Department, Mizuho Bank 1. Policy trends surrounding solar power generation 2. Trends in the solar power generation industry 3. Resource recycling related to solar power generation and panels 4. Examples of initiatives by businesses towards resource recycling - Towards glass recycling 5. Examples of initiatives by businesses towards resource recycling - Towards efficient collection 6. Examples of initiatives by businesses towards resource recycling - Guarantees and insurance for solar power generation equipment and related trends 7. Awareness of issues and directions for problem-solving regarding resource recycling of solar panels 8. Q&A / Business card exchange

[Key Lecture Content] 1. New Trends in the Submarine Cable Market: Current Status and Outlook Mr. Takuya Makiyama, Senior Researcher, Mobility and Communication Policy Headquarters, Mitsubishi Research Institute 1. Why are submarine cables attracting attention now? 2. Overview of the submarine cable market 3. Major players and changes in industry structure 4. Future outlook and expectations 5. Q&A / Business card exchange 2. Submarine Cables Supporting International Communication and KCS's Initiatives Mr. Tomonori Shinto, Executive Officer and Senior Managing Director, Technical Operations Headquarters, KDDI Cable Ship Co., Ltd. 1. Business introduction 2. Overview of submarine cables 3. Various operations related to submarine cables 4. Current status and challenges of the submarine cable industry 5. Q&A / Business card exchange

[Speaker] Ayaka Hiraki, Fellow at Deloitte Tohmatsu Research Institute, General Incorporated Association [Key Lecture Content] Due to high tariff measures and withdrawal from international organizations by the second Trump administration in the United States, military operations in Venezuela, and attacks on Iran, the world is indeed "Under Destruction." As the economy and cutting-edge technologies become intertwined with security, this lecture will analyze the trends in the defense industries of Japan, Europe, and the United States from three perspectives: "modular security," "total defense," and "the rise of artificial intelligence (AI)," while examining the potential and challenges of Japan's defense industry. [Lecture Topics] 1. Changes in Japan's security environment 2. Three points to consider for future security systems (1) Modular security architecture (2) Total defense (3) AI 3. Initiatives in Japan, Europe, and the United States (1) Europe: European defense industry strategy and strategic autonomy (2) United States: National security strategy under the Trump administration (2025 NSS) and defense innovation (3) Japan: Key points of the FY2026 budget and trends towards the revision of three strategic documents 4. Future outlook for the defense industry - possibilities and challenges regarding participation 5. Q&A

[Speaker] Anderson Mori & Tomotsune Law Office Foreign Law Joint Enterprise Partner Attorney Eiji Kobayashi [Lecture Topics] 1. FIT/FIP System in Solar Power Generation Business (1) Overview of FIT/FIP System Based on Renewable Energy Law (2) Background of Amendments to Renewable Energy Law Related to Solar Power Generation Business (3) Key Practical Points in Current Renewable Energy Law 2. Amendments and Regulations Related to Solar Power Generation Business (1) Forest Law (2) Electricity Business Law (3) Environmental Impact Assessment (4) Landscape Law (5) Others 3. Q&A Session