Our "Rakurakuban" was featured in the Japan Agricultural News as a "hot topic product."

Very convenient for laying boards, temporary setups, and protection! It's a sturdy product that is shock-resistant and can withstand compression!

You can use it according to your needs, such as for construction sites where space is limited or around vinyl houses. "JULIGHT Super JULIGHT Half" is a sturdy and solid board that can withstand a weight of 2000 tons/m² (based on our own measurements). It is made of recycled polyethylene resin, which does not crack easily, is resistant to warping, blends well with the ground. 【Types Available】 - JULIGHT 6/10 Half L (Size: 455×1,820) - JULIGHT 6/10 Half S (Size: 910×910) (Thickness: 6–10 mm, Weight: 4.5–7.5 kg) - Super JULIGHT 36 (Thickness: 15 mm, Weight: 9 kg) Half L (Size: 455×1,820) Half S (Size: 910×910) - Super JULIGHT M2 (Thickness: 15 mm, Weight: 11.5 kg) Half L (Size: 500×2,000) Half S (Size: 1,000×1,000) *Units in mm 【Features】 ○ Certified by the Japan Environment Association Eco Mark Office as an environmentally friendly product Product Brand Name: JULIGHT Certification Number: 08118017 For more details, please contact us.

• mat

Easy to lay down and simple to use for protection. Equipped with anti-slip features suitable for vehicle traffic!

The "Rakurakuban" is an ultra-lightweight (10kg) agricultural-specific lightweight resin mat, featuring anti-slip (3mm protrusions) and a user-friendly size of 3×6 (910mm×1,820mm), making it easy to carry even by one person. It is a plastic mat suitable for agricultural work, light tasks, and vehicle traffic. Its lightweight, durable, and flexible nature allows it to adapt well to the substrate, making it useful for a wide range of applications such as mats, protective sheets, and more. It is ideal for light work areas, around greenhouses, temporary parking lots that also prevent weeds, truck beds, and sales areas. Note: As it is a thin type, we recommend pre-compacting the substrate for the passage of agricultural machinery and trucks. It is also suitable for parking private cars, motorcycles, and scooters. This mat is made of recycled polyethylene resin, which is resistant to cracking and blends well with the ground. 【Features】 ○ Lightweight and easy to carry ○ Durable and strong quality ○ Easy-to-handle material ○ Waterproof and can be washed ○ Anti-slip design for safety on rainy days *For more details, please contact us.

• mat

Convenient for temporary setups and protection! A mat that balances flexibility and strength while being environmentally friendly.

We are engaged in the development, manufacturing, and sales of plastic sheets made primarily from recycled polyethylene (PE). Compared to conventional steel plates, these sheets are significantly lighter and easier to handle. Additionally, they are more durable and stronger than waterproof plywood, and they excel in water resistance, making them suitable for various protection applications and as sheets.

• Other conveying machines

Very convenient for temporary setups and protection! It's a sturdy product that is shock-resistant and can withstand compression.

"JULIGHT" is an easy-to-use, lightweight resin sheet available in two thicknesses: 6mm and 10mm. It measures 910mm × 1,820mm (3 × 6). This is the definitive plastic sheet. Its lightweight, durable, and moderately thick and flexible design makes it suitable for a wide range of applications, including as a sheet for flooring and protection. It is made of recycled polyethylene resin, which does not crack, is resistant to warping, blends well with the ground, and is ideal for parking motorcycles and scooters. 【Product Types】 JULIGHT 6 (Size: 910 × 1,820, Thickness: 6mm, Weight: 9kg) JULIGHT 10 (Size: 910 × 1,820, Thickness: 10mm, Weight: 15kg) 【Features】 ○ Certified by the Japan Environmental Association Eco Mark Office as an environmentally friendly product Product Brand Name: JULIGHT Certification Number: 08118017 ○ Lightweight and easy to carry ○ Durable and strong quality ○ Easy-to-handle material ○ Completely waterproof and resistant to dirt For more details, please contact us.

• mat

Very convenient for use as a base and for protection! A durable product that is strong against impact and can withstand compression!

The "Super J-Light" is a sturdy and solid board that can withstand a weight of 2000 tons/m² (measured by our company). It is lightweight at 19kg and easy to handle, with a total thickness of 15mm (rib thickness is 3mm) and dimensions of 910mm x 1,820mm (3x6 size). This plastic board is economical due to its reusability, allowing for multiple uses. It is made of recycled polyethylene resin, ensuring it does not crack easily, is resistant to warping, blends well with the ground, and is durable. 【Types Available】 Super J-Light 36 (Size: 910×1820mm, Thickness: 15mm, Weight: 19kg) Super J-Light M2 (Size: 1,000×2,000mm, Thickness: 15mm, Weight: 23kg) 【Features】 ○ Certified by the Japan Environmental Association Eco Mark Office as an environmentally friendly product Product Brand Name: J-Light Certification Number: 08118017 ○ Durable and strong quality ○ Easy-to-handle material ○ Completely waterproof and resistant to dirt For more details, please contact us.

• mat

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.