Notice of Participation in the New Manufacturing and New Services Exhibition for Small and Medium Enterprises

New product! 4-blade wavy 3D composite R shape Zero Valley X is born!

The ultra-hard drill independently developed by Giken is an innovative hybrid drill that suppresses burrs, eliminates the need for pilot holes, and is re-sharpenable. We offer the ultra-hard drill "ZeroBari" in a lineup suitable for various materials such as aluminum, stainless steel, titanium, carbon fiber reinforced plastic, and Inconel. 【Features of ZeroBari X for Aluminum and Resin】 ▶ No need for centering or pilot holes ▶ Clean holes without burrs with just one ZeroBari drill ▶ Reduction in labor costs and overall cost savings ▶ Usable on pipes and curved surfaces ▶ Improved drilling speed compared to two-blade ZeroBari drills ▶ Hole accuracy of H7 or below ▶ Trademark registered and patent pending We also offer test loans (for a fee), so please contact us for more details. Additionally, if you have any other concerns regarding drills, feel free to consult us anytime. We look forward to your inquiries.

• Other cutting tools

A hybrid drill that reduces deburring work, enabling cost reduction and high-efficiency production.

The "Zero Buri GK-HSZ Series" is a cost-effective drill for stainless steel that can be re-sharpened. It can drill straight while correcting slightly bent pilot holes. It achieves excellent cutting and chip removal performance with large curves. This product is a joint development with the Fukui Prefectural Industrial Technology Center. 【Features】 ■ No burrs produced with one-shot drilling without a pilot hole ■ Hole accuracy is H6 or better as long as there is no runout ■ Outstanding straightness ■ Can drill straight while correcting slightly bent pilot holes ■ Jointly developed with the Fukui Prefectural Industrial Technology Center *For more details, please refer to the PDF document or feel free to contact us.

• drill

Perfect for improving operational efficiency! Measures against drill breakage! Achieves excellent cutting and chip removal! Recommended drill with 4 blades and a wavy 3D composite R shape!

The "Zero Valley X" is a hybrid drill suitable for cross-hole drilling in aluminum and resin. With four cutting edges, the cutting speed is doubled (compared to our products). Burr removal work is reduced, enabling cost savings and high-efficiency production. Additionally, the sub-fine curve full flute increases cutting speed by distributing and reducing load, achieving excellent cutting and chip removal without clogging. 【Features】 ■ Four cutting edges ■ Wavy 3D composite R shape ■ Burr-free drilling in one shot without a pilot hole ■ Ideal for cross-hole drilling in aluminum and resin ■ Hole accuracy is H7 or better as long as there is no runout *For more details, please refer to the PDF document or feel free to contact us.

• drill

High efficiency! With just one super hard drill, you can achieve clean drilling without burrs! A hybrid drill for CFRTP (thermoplastic) with multifunctionality!

The "Zero Buri GK-HCTZ Series" is a hybrid drill for CFRTP (thermoplastic CFRP) that allows for one-shot drilling without a pilot hole, resulting in no burrs. It can drill straight even with slightly bent pilot holes, exhibiting excellent straightness. The large waveform effect minimizes heat to the extreme, achieving outstanding cutting performance. 【Features】 ▶ No need for deburring ▶ Regrindable ▶ Hole accuracy is H6 or better as long as there is no runout ▶ Excellent straightness ▶ R-blade with a special R shape that disperses cutting resistance, reduces heat, further minimizes burrs (delamination), and extends lifespan ▶ Taper end mill that eliminates fine burrs (delamination) ▶ Reamer shape that finishes the hole sides beautifully ▶ Capable of drilling straight even with slightly bent pilot holes ▶ Jointly developed with the Fukui Prefectural Industrial Technology Center; patent obtained ▶ Awarded the Kansai Monozukuri Shin Selection 2014 If you have any other concerns regarding drills, please feel free to consult us anytime. We look forward to your inquiries.

• drill

No burrs with a single perforation without a pilot hole! Even with a slightly bent pilot hole, perforation can be done straight while correcting.

The "Zero Buri GK-HCZ Series" is a hybrid drill for CFRP that reduces burr removal work, enabling cost reduction and high-efficiency production. It suppresses heat with a wave effect, achieving excellent cutting performance. It has good bite and features composite R shinning for precise positioning. Additionally, it is economical as it can be re-sharpened. 【Features】 ■ No burrs produced with one-shot drilling without a pilot hole ■ Hole accuracy is H6 or below as long as there is no runout ■ Excellent straightness ■ Can drill straight while correcting even slightly bent pilot holes ■ Jointly developed with the Fukui Prefectural Industrial Technology Center *For more details, please refer to the PDF document or feel free to contact us.

• drill

Perfect for drilling! Excellent burr suppression, outstanding hole accuracy, equivalent to spiral reamers, and can drill curved surfaces in one go【A mysterious drill that produces no burrs】.

【Features】 - No burrs - Can drill in one shot even on curved surfaces and angled holes. - Hole accuracy H6 - Surface roughness equivalent to spiral reamers - Completes from centering to reaming finish in one shot.

• drill

Are you having trouble with burrs during processing? Let us introduce the mysterious drill that produces no burrs: the Zero Burr Drill X Series!

Introducing the revolutionary 【Zero Burr Drill X】 that suppresses burrs generated during drilling and machining of aluminum and molds. Are you experiencing excessive burrs on the backside of pipes that require a lot of manual work? The 【Zero Burr Drill X】 is a hybrid drill that combines a taper end mill and a reamer, capable of suppressing burrs that occur during drilling. By suppressing burrs from the outset, it leads to time savings, cost reductions, and lower labor costs. We have received many positive feedbacks from our customers who are using it. (See below) 【Features】 - No burrs produced - Capable of drilling curved surfaces and angled holes in one go - Hole accuracy H7 - Surface roughness equivalent to spiral reamers - Completes centering to reamer finishing in one drilling operation - Compatible with cross holes - Cutting conditions are 1.5 to 2 times that of Zero Burr two-flute drills - Equipped with oil holes We look forward to your inquiries.

• drill

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

[Lecture Topics] 1. Trends and Business Opportunities in Japan's Expanding Energy Storage Industry Koichiro Danno, Principal and Head of Social and Policy Design Unit, Research and Consulting Division, Japan Research Institute, Inc. 1. Background Necessitating Energy Storage Business 2. Behind the Meter (BTM) Business and In Front of the Meter (IFM) Business 3. Trends in Japan's Energy Policy Related to Energy Storage 4. Current Revenue Models in Japan 5. Verification of Profitability in Energy Storage Business 6. Summary 7. Q&A 2. Expansion of Grid-Scale Energy Storage Business in Europe and Japan and Future Prospects Takayuki Ogawa, Executive Officer, Deputy Head of Business Strategy Division, Japan Kogyo Energy Solutions, Inc. and Executive Director, Nippon Koei Energy Europe B.V. 1. Overview of the Company and Introduction to Energy Business 2. Efforts in Energy Storage Business in Europe 3. Efforts in Energy Storage Business in Japan 4. Role and Importance of Aggregators 5. Challenges and Future Prospects of Grid-Scale Energy Storage Business 6. Summary 7. Q&A

[Speaker] Hideo Yamamoto, President and CEO of DIVE COMPASS Inc. [Key Message] "Consumers will no longer be at the end of the power system." By reconfiguring the energy landscape starting from the "consumer" rather than viewing renewable energy, electricity retail, PPA, storage batteries, EVs, VPP, and DSF as separate businesses, there is potential to create new energy businesses in Japan. This presentation will not only introduce the latest trends in Europe but will also consider future market changes and business opportunities from the perspective of "what can be commercialized next in the Japanese market." [Presentation Items] 1. Why consider the electricity market from the consumer's perspective now? 2. Five market changes confirmed at FLEXCON 2026 on the front lines of European DSF 3. The current state of the Japanese DSF market seen through comparison with Europe 4. New consumer-centric energy businesses emerging in Japan 5. Who will hold the connection with consumers by 2030? 6. Q&A / Business card exchange

Are you struggling with the fact that even after raising recruitment costs and hourly wages, on-site personnel are not sticking around? The true causes of turnover lie in "fatigue from heavy labor" and "discomfort in the work environment." However, improving the entire facility or fully automating operations involves enormous initial investments and is not realistic. In this seminar, we will reveal three practical solutions to create a "preferred workplace" based on a case study that reduced investment costs by approximately 20% compared to traditional proposals, without relying on expensive renovations or endless wage increases. The key lies in the integrated design of "construction and equipment" and "robotics." By thoroughly eliminating unnecessary capital investments, we can dramatically reduce the burden on the workforce and enhance productivity. As a company that also engages in outsourcing, we will thoroughly explain the "three principles" that support integrated design, using actual improvement cases. This content is a must-see for executives and site managers who want to fundamentally solve labor shortages within their budgets. [Recommended for] - Companies that continue to face turnover and recruitment difficulties despite raising wages and recruitment costs. - Site managers and executives who considered full building air conditioning or complete automation but abandoned the idea due to high costs. - Site managers and executives who want to balance investment restraint and productivity improvement through relocation or renovations.

We will be exhibiting at the "26th Business Fair" hosted by Seibu Shinkin Bank, which will be held on Thursday, October 15, 2026, at the Triangle Plaza in Shinjuku Sumitomo Building! This event is a corporate exhibition and matching event aimed at expanding business opportunities for small and medium-sized enterprises. Over 300 companies and organizations will participate, promoting their excellent technologies and products to one another.