[Announcement of Webinar] Agilent Pharma / Biopharma Virtual Summit 2021

Agilent dissolution tester online UV system

The Cary 60 spectrophotometer, when combined with a pump in an online UV system, along with the sampling station 850-DS, allows for filter filtration and simultaneous sampling into test tubes or HPLC vials after filtration. **Evaluation Method for Drugs in Dissolution Testing Using Fiber Optics** Using fiber optics enables direct quantification of drugs within the vessel without the need for sampling. For example, when using fiber optics in dissolution testing for the evaluation of crystallization suppression of solid dispersions aimed at improving solubility, detailed dissolution profiles can be obtained through measurements at short intervals, as no sampling is required.

• UV/visible spectrophotometer

JP17 Bureau Reference Information: Mechanical Calibration Correspondence for Dissolution Test Apparatus

The 280-DS MQS measures the parameters of mechanical calibration of dissolution testers with high precision. Measurement is done hands-free thanks to sensor technology, taking only about 30 minutes per unit. It complies with 21 CFR Part 11. ★ Mechanical calibration has been included as reference information in the 17th edition revision. "To aim for reduced variability in test results through mechanical calibration, it is recommended to apply this reference information." (From the 17th Japanese Pharmacopoeia revision "Standard Methods for Mechanical Calibration of Dissolution Testers")

• Dissolution Tester

Corresponds to the Japanese Pharmacopoeia, USP, and EP3. The design minimizes mechanical variation factors of the device using vessels that reduce the deviation of the container's centering.

The dissolution tester 708-DS features one-touch centering with the TruAlign vessel, and its design minimizes the risk of misalignment after installation, reducing the risk of failure during mechanical calibration. It supports Japanese language, has a two-piece paddle, and significantly improves basic operability with an expanded space between the drive unit and the vessel plate. It accommodates a wide range of dosage forms for dissolution testing, including tablets, capsules, rotating cylinders, and the paddle-over-disk method.

• Dissolution Tester

It automatically performs sample suction, filtration, and collection from the dissolution tester.

■Efficiency Automation enables easy and quick sampling. It eliminates the labor involved in dissolution testing and prevents variations in sampling volume and position that would be difficult to manage manually. All functions, including the pump, filter (optional), and sampler, are integrated into a device just 39 cm wide. One filter plate used for sample filtration contains the equivalent of eight 0.45 μm filters. ■Flexibility In addition to the standard pump function, you can select filter functions according to your needs. Sampling can accommodate test tubes, HPLC vials, and well plates. ■Accuracy The rotary piston syringe pump ensures precise sampling of the specified amount at designated sampling points. Uniformity The color touch panel of the 850-DS allows for input of the dissolution test program. ■Test Results Test data can be printed using the built-in printer.

• Dissolution Tester

Management of test data, data integrity, dissolution testing software!

Since 2015, guidance on data integrity (DI) has been issued by the MHRA (UK Medicines and Healthcare products Regulatory Agency), WHO, FDA, and PIC/S, and its importance has been increasing in recent years. DI is defined as "the completeness, consistency, and accuracy of data. Data that is complete, consistent, and accurate is recorded with attributes of traceability, legibility, and contemporaneity, and is either original data or a true copy, and is accurate." It also ensures that pharmaceuticals meet the required quality standards. DWS is the optimal software for ensuring data integrity in dissolution testing. It supports access management, data tampering prevention, and backup, allowing for the management and control of dissolution testers and their peripheral devices with just this one software, making complex methods and data management easier to handle.

• Dissolution Tester

Nitto Kohki will hold the "2026 Attack Fair in Misato" at the Misato City Cultural Hall Exhibition Room for two days on Wednesday, August 26, 2026, and Thursday, June 27, 2026. The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful souvenirs for visitors and many fun activities prepared. We look forward to welcoming everyone!

On November 6th, the "Reiwa 8th Year Sennan Region Manufacturing Promotion Seminar and Exhibition Exchange Meeting" will be held. Nichiko Electric Co., Ltd. will also present improvement case studies at the Kaizen presentation session. Advance registration is required (free of charge), so we would be grateful if you could apply and attend on the day. ◎ Reiwa 8th Year Sennan Region Manufacturing Promotion Seminar and Exhibition Exchange Meeting (Advance registration required, free of charge) Date and Time: November 6, 2026 (Friday) from 12:10 to 17:00 Venue: Miyagi Prefecture Okawara Joint Government Building, 2nd floor "Room 201" / 4th floor "Large Conference Room" (Address: 129-1 Minami, Okawara Town, Shibata District, Miyagi Prefecture) Organizer: Specified Nonprofit Corporation Sennan Wide Area Industrial Association, Miyagi Prefecture Okawara Regional Promotion Office Co-sponsor: General Incorporated Association Miyagi Prefecture Management Association Sennan Branch Miyagi Prefecture Okawara Regional Promotion Office, Regional Promotion Department (Contact: Yokoyama) TEL: 0224-53-3199 / FAX: 0224-53-3076 Please fill out the attached application form and apply via email. Application Deadline: October 27, 2026 (Monday) (Note) Members of the NPO Sennan Wide Area Industrial Association and members of the General Incorporated Association Miyagi Prefecture Management Association Sennan Branch should also apply by the above deadline.

Next-generation large and high-speed metal 3D printers that offer short lead times, low costs, and high precision are being rapidly introduced to the market. These printers are actively being utilized in the manufacturing of large metal parts and products in the aerospace, automotive, defense, industrial machinery, plant, and civil engineering and construction sectors, as well as for the repair of metal parts and molds, and reverse engineering. In the first lecture of this seminar, we will provide an overview of the Farsoon LPBF method large and high-speed metal 3D printer, which can produce parts up to 1500mm, along with its short lead time, low-cost, and high-quality manufacturing technology and public case studies. The second lecture will cover the short lead time manufacturing technology and examples from Fujikohsai Industries, which has adopted the large metal 3D printer from Meltio, as well as low-cost and material reduction cases utilizing topology optimization. The third lecture will present applicable cases from JFE Engineering, which has introduced a large metal 3D printer from Nidec Machine Tool and is experiencing a surge in requests for manufacturing marine and rocket engine parts, plant equipment parts, and applications in parts and mold repair and reverse engineering. The fourth lecture will showcase the latest manufacturing technology and examples from Sanko Gosei, which is producing high-functionality and high-quality diverse large resin mold parts using a large hybrid 3D printer from Matsuura Machinery. We will provide a clear and detailed explanation of the above topics.

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

[Lecturers] PwC Consulting LLC Senior Manager Yosuke Enomoto Senior Manager Tomoe Ejiri [Key Lecture Content] Against the backdrop of the rapid proliferation of generative AI, the digital infrastructure supporting data processing, communication, and computing resources is undergoing a significant transformation. In this presentation, we will first organize the trends in the terrestrial data center market expanding from AI demand, as well as the structural changes surrounding power, location, and networks. Furthermore, as communication and data processing infrastructure expands into space, we will take a broad view of the future of next-generation digital infrastructure that integrates terrestrial and space elements. Additionally, we will explore new business transformations and opportunities that arise from combining satellite data and internal and external data with AI, and implementing them in business and decision-making through the Forward Deployed Engineer (FDE) approach.