Addition of variations with low profile (stack height 5mm) and high heat resistance (+105℃)! 0.4mm pitch floating connector "DU series".

The operating temperature supports up to +105℃!

We have launched the new 0.5mm pitch floating connector / high heat resistance type 'DY03/04 series'. 【Features】 - Operating temperature supports up to +105°C. - Floating amount ensures ±0.5mm in the XY direction. - High reliability design with an effective mating length of 1.25mm. - Option to select with or without positioning bosses. - Available in six types with pin counts ranging from 50 to 140. - Stack heights supported are 5mm, 11mm, 12mm, 13mm, and 14mm. *Note: The 11mm to 14mm stack height types are compatible with DY1□-□□□FS□-□ for +105°C. *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

Stack height 25mm! We have developed additional variations of the high stack type.

We have developed the 'DT Series' floating connector with a 0.5mm pitch that supports high-speed transmission, featuring a stack height of 25mm. It ensures a high floating amount of ±1.0mm in the XY direction, enabling high-speed serial transmission equivalent to 8Gbps. We offer seven types of pin counts ranging from 30 to 140 pins, and by combining them with the existing receptacle side of this series, it can also accommodate a stack height of 15mm. 【Features】 - 0.5mm pitch floating connector compatible with high-speed transmission - Transmission characteristics support high-speed serial transmission equivalent to 8Gbps - High floating amount of ±1.0mm in the XY direction - High-reliability design with an effective mating length of 1.5mm - Compatible with a stack height of 25mm - Seven types of pin counts: 30, 40, 60, 80, 100, 120, and 140 pins *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

Stack height 30mm; floating amount compatible with ±1.0mm in the XY direction!

We have launched a new 0.5mm pitch floating connector compatible with high-speed transmission, the 'DT Series', with a stack height of 30mm. It ensures a high floating amount of ±1.0mm in the XY direction, enabling high-speed serial transmission equivalent to 8Gbps. We offer seven types of pin counts ranging from 30 to 140 pins, and by combining them with the receptacle side of the existing series, it can also accommodate a stack height of 15mm. 【Features】 - 0.5mm pitch floating connector compatible with high-speed transmission - Transmission characteristics support high-speed serial transmission equivalent to 8Gbps - Ensures a high floating amount of ±1.0mm in the XY direction - High-reliability design with an effective mating length of 1.5mm - Supports a maximum stack height of 30mm - Available in seven types of pin counts: 30, 40, 60, 80, 100, 120, and 140 pins *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

Not only can it absorb positional misalignment during fitting, but it can also accommodate positional misalignment after fitting due to rotation from tightening screws!

A "floating connector" is a connector equipped with a floating mechanism that absorbs vertical and horizontal errors that occur when mounting the connector onto a circuit board. By allowing the connector to move, it can absorb errors and misalignments during mating, preventing issues such as cracks in the circuit board. It is widely used in devices where circuit boards are densely packed, such as car navigation systems, digital cameras, and semiconductor control devices. 【Features】 ■ Equipped with a floating mechanism ■ Absorbs errors and misalignments during mating by allowing the connector to move ■ Prevents issues such as cracks in the circuit board *For more details, please refer to the PDF document or feel free to contact us.

• Board to Cable Connector

The connector's connection part is movable to absorb stress! It is widely used in both industrial and consumer equipment.

At KERU Corporation, we handle compact and high-performance "Floating Connector" products. Under the general term "D-Sign Floating," we have developed a series of new products, starting with the 0.5mm pitch connector "DY series," followed by the 0.635mm pitch connector "DW series," the 0.4mm pitch connector "DU series," and evolving into the next-generation 0.5mm pitch floating connector "DT series," which supports three-dimensional, multi-pole, and high-speed transmission. These connectors are characterized by their compact size, multi-pole capability, and high-speed transmission. 【Features】 ■ Produced in a clean area ■ Multiple connectors can be used together ■ Expanded design possibilities, enabling unprecedented designs ■ Single-point contact on the roll surface ■ Ensures a pathway for foreign objects during wiping, preventing foreign object entrapment *For more details, please refer to the PDF materials or feel free to contact us.

• Board to Cable Connector

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall