The homepage has been updated (Somax Co., Ltd.).

Wash multiple mold parts at once! Safe and secure mold cleaning without using organic solvents! Free comic materials on the dangers of organic solvents.

Using a mold cleaning spray that contains harmful "organic solvents," each mold part is maintained by hand one by one. ↓ With the safe and secure mold cleaning machine, Kuripika Ace, you can wash multiple mold parts at once! This reduces maintenance time! 【Conventional Mold Maintenance】 ● Very labor-intensive due to manual work ● Time-consuming and lacking manpower ● There are areas like the inner corners of molds that are hard to reach ● Hand polishing can cause scratches on the molds ● Concern about the burden on the body due to the use of organic solvents 【Mold Cleaning Machine 'Kuripika Ace'】 〇 Automatically cleans molds arranged in a dedicated basket 〇 Cleans multiple molds at once 〇 Cleaning solution penetrates every corner of the mold and removes dirt 〇 Dirt is lifted and removed, causing no damage to the mold 〇 Uses a water-based cleaning solution with low environmental impact and contains no organic solvents We offer a lineup tailored to the size of the molds. *For details, please see "Lineup." : We have uploaded a comic about the dangers of organic solvents:

• Other cleaning machines

Brightness recovery and yield improvement. With the optical component mold cleaning machine "Cripika Ace OPT," you can perfectly remove dirt from molds for optical components such as light guide plates and lenses!

＼Contactless cleaning!／ The mold cleaning machine for optical components, 'Clipika Ace OPT,' perfectly removes dirt adhered to delicate optical molds without causing any damage. It addresses gas burns and resin stains, ensuring that even nano and micro-level dirt is not missed. 【Conventional maintenance of optical component molds】 ● Performed manually using cotton swabs and other tools ● Requires utmost care as it is prone to scratches ● May not completely remove all dirt ● Concerns about the burden on the body due to the use of organic solvents 【Clipika Ace OPT】 〇 Automatically cleans molds arranged in a dedicated basket 〇 Allows for contactless cleaning 〇 Cleaning solution penetrates every corner of the mold, lifting and removing dirt 〇 Uses a water-based cleaning solution that has low environmental impact and does not contain organic solvents We offer a lineup tailored to the size of the molds. *For details, please refer to the "Lineup."

• Other molds
• Other cleaning machines
• Ultrasonic Cleaner

Remove and prevent rust accumulated in the mold temperature control piping and cooling pipes to improve cooling efficiency!

The "Water Remover" is a rust removal machine that automatically handles everything from cleaning mold temperature control piping to rust prevention. It removes layers of rust and impurities that have accumulated in the mold temperature control piping, improving cooling efficiency. 【Features】 - No need to disassemble the mold; simply connect the mold and this product with a hose for easy operation. - Forms a rust prevention coating simultaneously with rust removal. - Adopts an air blow drying system, eliminating the need for rinsing or neutralization after rust removal. - Does not discharge rust removal liquid due to a completely closed system.

• Other cleaning machines
• Other surface treatment equipment
• Other cleaning equipment

A welding machine that does not emit ultraviolet rays or fumes, eliminating the need for protective face shields and masks. It also prevents warping and distortion caused by heat!

Just when you're in a hurry, the mold suddenly breaks. You want to use it right away... The mold repair welding machine "Morhei" does not produce ultraviolet rays or fumes, allowing for mold repairs to be done with the naked eye without the need for protective face shields or masks. It welds at a temperature that won't cause burns even if touched with fingertips, enabling continuous power supply. Since it can build up material in a "surface" rather than just a "point," it can weld quickly without sparking. Another feature is that it is difficult to miss the target because the electrode is applied directly to the welding area. It prevents shrinkage and distortion caused by heat, and there is no thermal discoloration after welding. 【Features】 〇 Uses a paste-like welding material that fuses with the base material with minimal heat 〇 Capable of continuous welding from thick to thin linear buildup 〇 Compact design for portability 〇 No preheating or post-heating treatment required

• Plastic Mould
• Other molds
• Welding Machine

The Hyper CLT flooring is not only used on-site but also aims for further performance improvements through industry-academia collaboration with universities. To utilize wood in outdoor civil engineering sites, it is important to verify various challenges such as durability and water resistance. Therefore, Kaitaku Co., Ltd. continues research and development in collaboration with various universities. The goal is to connect research results to actual product improvements and new applications, evolving into more user-friendly and high-value wooden flooring. The Hyper CLT flooring is registered with the Ministry of Land, Infrastructure, Transport and Tourism under the NETIS technology "TH-250021-A." In addition to this NETIS registration achievement, research and development through industry-academia collaboration is ongoing. By combining the technologies of wood, NETIS, civil engineering, and universities, the Hyper CLT flooring further expands the possibilities of new civil engineering CLT.

In public works, not only construction quality but also safety measures, environmental considerations, and unique site-specific innovations are important. One proposal that is easy to suggest is the civil engineering CLT "Hyper CLT Mats" utilizing wood. These can be used for temporary roads, access routes, worker pathways, and material yards, improving the site environment from a different perspective than steel plates. It is also characterized by the ease of explaining the purpose of implementation to clients, such as measures against summer heat reflection, noise reduction, CO2 fixation, and consideration for the landscape. Furthermore, being a **NETIS registered technology "TH-250021-A"** by the Ministry of Land, Infrastructure, Transport and Tourism is a significant point when proposing in public works. It can be considered as one of the new technology applications and creative innovations. Clearly communicating "why this material is used" is also important when making proposals to government offices. The Hyper CLT Mats, which combine wood, NETIS, and civil engineering, are expanding their use in public works as a new civil engineering material that balances practicality and environmental consideration.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.