We have released an introduction video for the "CZT Series Tube Pump"!

Seal-less and valve-less mechanism for a simple structure! For the transport of various types of wastewater treatment sludge, sedimentation sludge, organic sludge, activated sludge, and more.

This is a tube pump suitable for high viscosity and slurry solutions. 【Features】 ○ Powerful suction force of -101KPa (760mmHg) Self-priming lift up to 9.5m of water column ○ Overwhelming pumping capacity of up to 25kg/cm² (Type: CZTG) volumetric pump ○ Capable of both forward and reverse rotation After pumping in the forward direction, it can reverse to recover residual liquid in the tube ○ Can self-prime and pump even fluids with high viscosity (50,000 mPa·s), high concentration, and containing solids or fibers ○ Solids can be up to 1/4 of the tube diameter ○ Can self-prime and pump almost any fluid as long as it is flowable ○ No issues with dry running; can operate with air and water ○ The tube is made of NR/NBR, which excels in acid resistance and abrasion resistance (NBR is particularly oil-resistant) ○ The fluid does not come into contact with anything other than the tube There is no concern about liquid leakage due to the non-seal, valve-less structure ○ Easy cleaning of the pump tube The piping can be quickly cleaned with a sponge *For more details, please contact us or download the PDF.

• Other pumps
• Other Pumps
• Tube Pump

With a small amount of moisture, everything can be self-absorbed and pumped.

We have developed a tube pump that is optimal for high-viscosity slurry solutions. ■ Powerful suction force of -101KPa (760mmHg) Self-priming lift is possible up to a water column of 9.5m ■ Overwhelming pumping capacity of up to 25kg/cm² (Type: CZTG) volumetric pump ■ The pump can rotate in both forward and reverse After pumping in the forward direction, it is possible to recover residual liquid in the tube by reversing ■ Capable of self-priming and pumping even for high-viscosity (50,000 mPa·s), high-concentration fluids containing solids and fibers Solids can be up to 1/4 of the tube diameter ■ If the fluid has flowability, most fluids can be self-primed and pumped ■ No issues with dry running; air-water operation is possible ■ The tube is made of NR/NBR, which excels in acid resistance and abrasion resistance (NBR is particularly excellent in oil resistance) ■ The flowing liquid does not come into contact with anything other than the tube (non-seal, valve-less structure), so there is no worry about liquid leakage ■ Easy cleaning of the pump tube The piping can be quickly cleaned with a sponge.

• Other environmental equipment

Significantly enhanced motor capacity! A liquid dosing injection pump that can widely adapt to various situations.

The "CZX/CZH" is a chemical dosing pump that can widely adapt to various situations. It is designed for use in factory wastewater, water supply and drainage, sewage treatment, the leisure industry, chemical, dyeing, and paper manufacturing plants, as well as food and pharmaceutical factories, and other water treatment and manufacturing processes. This pump emphasizes diversity, safety, and cost-effectiveness, and features a planetary gear drive. The entire pump is covered in plastic, giving it a refined style. Additionally, it is resistant to rust, maintaining its aesthetic appeal over a long period. It is well-suited for outdoor use or in environments with poor air quality, such as those filled with gas. 【Features】 - The planetary gear two-stage reduction significantly enhances the motor's capabilities. - The interior uses aluminum material, achieving lightweight design. - The flow adjustment dial is large, allowing for smooth setting adjustments. It also features stepless adjustment, enabling flow control from 0 to 100% during operation. *For more details, please refer to the PDF document or feel free to contact us.*

• Other pumps

In construction work, it is important not only to focus on the building itself but also to create a safe environment for construction vehicles and workers to move around. The Hyper CLT plywood is a lightweight wooden board that utilizes CLT. It can be used as temporary materials to support temporary roads, material delivery routes, heavy machinery work yards, material storage areas, and worker pathways, rather than as structural materials for buildings. The 5×10 board weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, or relocate depending on site conditions. This allows for the boards to be moved in accordance with the progress of the construction, making it easier to effectively utilize limited space. Additionally, the natural texture of the wood blends well with construction sites in residential areas and around public facilities, contributing to considerations for metal noise and summer heat reflection. The Hyper CLT plywood is a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system, designated as "TH-250021-A." It can be incorporated into highly public construction projects and exterior and earthworks, promoting the use of new technologies and environmental considerations. Wooden plywood, NETIS, civil engineering, CLT, lightweight wooden boards. A new option for temporary materials using wood is available for construction sites.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in a single molding process. This allows for the verification of multiple types in a short period.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.