Environmental improvement at evacuation centers with 'TKB': Stockpiling, welfare evacuation centers, evacuation living supplies - plastic folding simple bed 'PLA BED'.

A simple bed made with lightweight plastic sheets! ■ Moisture-resistant and suitable for long-term storage ■ Compact storage ■ Reusable ■ Can be disinfected with alcohol

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ★Compact Type★ The storage case can be used as a head partition, making it the most compact type of simple bed in the series. 【Reasons to Choose This Product】 ■ When not in use, it can be compactly stored without taking up storage space. ■ Assembly time is about 3 minutes, allowing for easy setup. ■ Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused multiple times. ■ It is compatible with alcohol disinfection and sterilization, keeping it clean at all times. ■ Using beds in evacuation centers helps suppress coughing caused by dust and particles. ■ Customization beyond standard sizes is possible. ■ Jointly developed with the Saitama City General Affairs Bureau Crisis Management Department Disaster Prevention Division. *For more details, please refer to the PDF document or feel free to contact us.*

• Other safety and hygiene products
• curtain
• Other office supplies

Lightweight plastic board simple bed ■ Moisture-resistant and suitable for long-term storage Compact storage ■ Reusable and economical ■ Can be disinfected with alcohol

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ★Speed Set Type★ This type has fewer parts and can be assembled in a short time. ■When not in use, it can be stored compactly, saving storage space. ■Assembly time is approximately 1 minute, making it easy to set up. ■Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused. ■It is compatible with alcohol disinfection and sterilization, allowing for constant cleanliness. ■Jointly developed with the Nagoya City Nakagawa Ward Office, Administration Division. *For more details, please refer to the PDF document or feel free to contact us.*

• Other safety and hygiene products
• curtain
• Other office supplies

Moisture-resistant, long-term storage possible. Can be stored compactly when not in use. Can be divided into three parts and used as a desk or chair. Alcohol disinfectant compatible. Foldable.

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plapal" manufactured by Kawakami Sangyo Co., Ltd. ★Multi-type★ The top board is divided into three sections, allowing it to be used not only as a bed but also as a desk or chair. ■ When not in use, it can be stored compactly, taking up minimal storage space. ■ Assembly time is approximately 1 minute, making it easy to set up. ■ Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused multiple times. ■ It is compatible with alcohol disinfection and sterilization, allowing it to be kept clean at all times. ■ Jointly developed with the Crisis Management Department, Disaster Safety Division of Sakai Town, Ibaraki Prefecture. *For more details, please refer to the PDF document or feel free to contact us.*

• Other safety and hygiene products
• curtain
• Other office supplies

Bubble wrap not only has cushioning properties but also excels in thermal insulation. It can be used as supplementary supplies for shelter life, such as "laying on the floor," "sticking to windows," and "providing warmth."

"Bubble wrap," which is usually used as packaging material, can be utilized differently during emergencies and disasters. It is recommended to stockpile bubble wrap in advance for various uses during such times. The insulation effect of bubble wrap can provide the following benefits: ■ Laying it on the floor It softens the hardness of floors, such as in gymnasiums, and also mitigates cold coming from the floor. ■ Sticking it on windows It reduces the intrusion of cold air from windows. ■ Wrapping it around water pipes It makes water pipes less likely to freeze. ■ Wearing it or wrapping it around the body It helps to keep warm. ■ Popping the bubbles It helps relieve accumulated stress. *For more details, please feel free to contact us.*

• Other safety and hygiene products
• Other office supplies
• Municipal services and business location

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.