[Example] Unexpected Uses of Bubble Wrap: Disaster Preparedness, Evacuation Shelters and Living Supplies, Cold Protection, Floor Cushioning Measures, Bubble Wrap.

A simple bed made with lightweight plastic sheets! ■ Moisture-resistant and suitable for long-term storage ■ Compact storage ■ Reusable ■ Can be disinfected with alcohol

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ★Compact Type★ The storage case can be used as a head partition, making it the most compact type of simple bed in the series. 【Reasons to Choose This Product】 ■ When not in use, it can be compactly stored without taking up storage space. ■ Assembly time is about 3 minutes, allowing for easy setup. ■ Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused multiple times. ■ It is compatible with alcohol disinfection and sterilization, keeping it clean at all times. ■ Using beds in evacuation centers helps suppress coughing caused by dust and particles. ■ Customization beyond standard sizes is possible. ■ Jointly developed with the Saitama City General Affairs Bureau Crisis Management Department Disaster Prevention Division. *For more details, please refer to the PDF document or feel free to contact us.*

• Other safety and hygiene products
• curtain
• Other office supplies

Bubble wrap not only has cushioning properties but also excels in thermal insulation. It can be used as supplementary supplies for shelter life, such as "laying on the floor," "sticking to windows," and "providing warmth."

"Bubble wrap," which is usually used as packaging material, can be utilized differently during emergencies and disasters. It is recommended to stockpile bubble wrap in advance for various uses during such times. The insulation effect of bubble wrap can provide the following benefits: ■ Laying it on the floor It softens the hardness of floors, such as in gymnasiums, and also mitigates cold coming from the floor. ■ Sticking it on windows It reduces the intrusion of cold air from windows. ■ Wrapping it around water pipes It makes water pipes less likely to freeze. ■ Wearing it or wrapping it around the body It helps to keep warm. ■ Popping the bubbles It helps relieve accumulated stress. *For more details, please feel free to contact us.*

• Other safety and hygiene products
• Other office supplies
• Municipal services and business location

Unexpected uses of bubble sheet beyond packaging: as a cold weather measure, it can be used for "laying on the floor," "sticking to windows," or "as a substitute for a sleeping bag," as well as for emergency supplies.

"Bubble sheet," which is usually used as packaging material, can be used in different ways during emergencies and disasters. It is recommended to stockpile bubble sheet in advance for various uses during emergencies and disasters. The insulation effect of bubble sheet can provide the following benefits: ■ Laying it on the floor It softens the hardness of floors in places like gymnasiums and reduces cold from the floor. ■ Sticking it on windows It mitigates the intrusion of cold air from windows. ■ Wrapping it around water pipes It makes water pipes less likely to freeze. ■ Wearing it or wrapping it around the body It provides warmth. ■ Popping the bubbles It helps relieve accumulated stress. *For more details, please feel free to contact us.*

• Other safety and hygiene products
• Other office supplies
• Municipal services and business location

Moisture-resistant, long-term storage possible. Can be stored compactly when not in use. Can be divided into three parts and used as a desk or chair. Alcohol disinfectant compatible. Foldable.

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plapal" manufactured by Kawakami Sangyo Co., Ltd. ★Multi-type★ The top board is divided into three sections, allowing it to be used not only as a bed but also as a desk or chair. ■ When not in use, it can be stored compactly, taking up minimal storage space. ■ Assembly time is approximately 1 minute, making it easy to set up. ■ Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused multiple times. ■ It is compatible with alcohol disinfection and sterilization, allowing it to be kept clean at all times. ■ Jointly developed with the Crisis Management Department, Disaster Safety Division of Sakai Town, Ibaraki Prefecture. *For more details, please refer to the PDF document or feel free to contact us.*

• Other safety and hygiene products
• curtain
• Other office supplies

Moisture-resistant, long-term storage possible. Can be stored compactly when not in use. Few parts and quick assembly. Alcohol disinfectable. Foldable.

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plaparl" manufactured by Kawakami Sangyo Co., Ltd. ★Speed Set Type★ This type has fewer parts and can be assembled in a short time. ■When not in use, it can be stored compactly, saving storage space. ■Assembly time is about 1 minute, making it easy to set up. ■Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused. ■It is compatible with alcohol disinfection and sterilization, allowing it to be kept clean at all times. ■Jointly developed with the Nagoya City Nakagawa Ward Office, Administrative Division. *For more details, please refer to the PDF document or feel free to contact us.*

• Other safety and hygiene products
• curtain
• Other office supplies

Moisture-resistant, long-term storage possible. Can be stored compactly when not in use. Storage case can be used as a bed partition. Alcohol disinfectant compatible. Foldable.

【Disaster Preparedness Supplies】 This product uses the lightweight rigid board "Plapal" manufactured by Kawakami Sangyo Co., Ltd. ★Compact Type★ The storage case can be used as a head partition, making it the most compact type of simple bed. ■ When not in use, it can be stored compactly without taking up storage space. ■ Assembly time is about 3 minutes, making it easy to set up. ■ Compared to cardboard products, it is resistant to moisture and water, does not deteriorate when wet, and can be reused. ■ It is compatible with alcohol disinfection and sterilization, allowing it to be kept clean at all times. ■ Jointly developed with the Crisis Management Department, Disaster Prevention Division of Saitama City. *For more details, please refer to the PDF document or feel free to contact us.*

• Other safety and hygiene products
• curtain
• Other office supplies

When measuring the flow rate of liquids or gases that are unsuitable for plastic due to high pressure or high temperature, our robust "glass tube variable area flow meter (rotameter)" allows for more accurate flow measurements. It offers a wider flow range and is suitable for various liquids and gases! 【Features】 ■ Glass tube variable area flow meter ・ Flow measurement technology with high durability, economy, and excellent operability ・ Capable of a wider flow range, suitable for various liquids and gases ■ Metal tube variable area flow meter ・ Durability and accuracy that withstands high pressure and harsh temperature environments 【Product Lineup】 ■ Glass tube variable area flow meter ・ Sho-Rate models 1350, 1355, 1358 ・ GT1600 series ■ Metal tube variable area flow meter ・ MT3750 series ・ MT3809 series ▼ For more details, visit https://www.brooksinstrument.com/ja-jp/products/variable-area-flow-meters

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation in environments with temperature differences, such as cold storage warehouses, is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable) ○ LED display and response sound allow for easy confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.