"Stirring Unit" Series | SUS container, stirring machine, and valve are included as a set.

High power for reduced heating time! A stirring temperature control unit that can evenly heat contents in a short time.

- It comes with a stainless steel container, heater, stirrer, and valve. - It uses a water bath method to indirectly heat the contents and prevent sticking. - By heating while stirring, the contents can be heated evenly. - It can heat up to a maximum of 80°C. - The stirrer uses a "Bernoulli flow stirrer" that excels in suppressing foaming. - Compared to chillers (constant temperature water circulation devices), it is characterized by being "faster to heat," "cheaper," and "more compact." - The temperature of the contents can be adjusted through the linkage between the thermometer and the heater. - It comes with a level gauge that allows you to check the water level inside the jacket.

• tank

A unit consisting of a Bernoulli flow mixer, a stainless steel container, and a valve. It excels in stirring with reduced foaming.

The container adopts a dished shape that excels in stirring efficiency. Additionally, it comes with a jacket that allows for temperature control. Features: - A lineup of selectable capacities ranging from 35 to 150 liters. - Water can be circulated through the jacket (outer tank) to maintain the temperature of the contents, either for heating or cooling. - The discharge outlet features a tank bottom ball valve with minimal dead space, allowing for quick opening and closing. - Equipped with caster legs for easy mobility. - The stirrer can be selected from two connection methods and two types of motors (electric motor/air motor).

• tank

A unit consisting of a Bernoulli flow mixer, stainless steel container, and valve. It excels in mixing with reduced foaming.

- A lineup of selectable capacities ranging from 30 to 80 liters. - The container is a pressurized vessel with a jacket that allows for temperature control and pressurized stirring. - It is designed to withstand pressures up to 0.18 MPa, making it suitable for pressure-related stirring such as degassing. - It features a clamp band for securing the lid in an open type. - Water can be circulated through the jacket (outer tank) to maintain the temperature of the contents or for cooling. - The discharge outlet uses a ball valve with a hygienic connection. - It has caster legs for easy mobility. - The stirrer can be selected from four types with different motor specifications.

• tank

A unit consisting of a Bernoulli mixer, stainless steel container, and valve. It excels in stirring with reduced foaming.

- A lineup of selectable capacities from 30 to 200 liters. - The container is a pressurized vessel that allows for pressurized stirring. - It has a pressure resistance specification of up to 0.18 MPa, making it suitable for stirring that involves pressure, such as degassing. - It features a flange open type that is secured with bolts. - The discharge outlet uses a ball valve with a Heli-connection. - It has caster legs for easy mobility. - The stirrer can be selected from four types with different motor specifications.

• tank

A unit consisting of a Bernoulli mixer, stainless steel container, and valve. It excels in stirring with reduced foaming.

Features - A lineup of selectable capacities from 35 to 150 liters. - The container adopts a single taper shape with a slanted bottom plate for smooth lateral discharge. - The discharge port is equipped with an LPS valve for a helical connection. - It has caster legs for easy mobility. - The mixer offers two connection methods and two types of motors (electric motor/air motor) to choose from.

• tank

A unit consisting of a Bernoulli flow mixer, stainless steel container, and valve. It excels in stirring with reduced foaming.

Features - A lineup of selectable capacities from 35 to 150 liters. - The container has a dished shape that excels in stirring efficiency. - The discharge outlet uses a tank bottom ball valve with minimal dead space, allowing for quick opening and closing. - Equipped with caster legs for easy mobility. - The stirrer can be selected from two connection methods and two types of motors (electric motor/air motor).

• tank

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

[To the owners of parking lots and parking lot construction companies] "I’m worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surroundings with LED lights and buzzers. The device consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask that customers arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.