ZEB-compatible large-capacity and compact industrial storage system | Product page has been published.

A large-capacity, compact industrial energy storage system <BLP> that corresponds to the operation of the energy storage system defined in the resilience ZEB demonstration project.

A large-capacity, compact industrial storage system compatible with the operation of the storage system defined in the Resilience ZEB demonstration project. ■ It is expected to reduce installation costs through subsidies limited to public facilities. A project promoting the introduction of autonomous and decentralized energy equipment, such as evacuation facilities, that simultaneously realizes regional resilience and decarbonization. Support for the introduction of renewable energy generation and storage systems in public facilities designated as evacuation facilities and disaster prevention bases. If introduced through a system that incurs no initial costs, priority selection is given, with subsidy rates of one-third for prefectures, ordinance-designated cities, and specified cities; one-half for solar power generation and cogeneration systems in municipalities; and two-thirds for remote islands. (Source: Ministry of the Environment website) ■ Features and Strengths ● Compatibility with PV Thanks to the pseudo-grid connection function, normal power generation is possible even during power outages without the PV power conditioner entering autonomous operation. ● Constructability Designed in a compact size that allows outdoor installation without the need for a separate enclosure, featuring a stainless steel casing with IP54 equivalent waterproof and dustproof properties. ● Expandability Up to four units can be connected in parallel within the same system, with a maximum output of 120kVA (30kVA output for each of the four during autonomous operation) / 294.8kWh.

• Other power sources
• Lithium-ion battery
• Power storage device

A disaster prevention, mitigation, and industrial storage system that ensures power supply during emergencies and supports daily self-consumption. Achieving groundbreaking price, performance, and safety!

The industrial storage system from Connex Systems, the BLP, is designed for outdoor installation and can accommodate both emergency power supply and daily self-consumption. Additionally, its compact design integrates the PCS and battery housing, contributing to space-saving. It is a system suitable for BCP applications that can be reasonably scaled up to meet only the necessary demands during emergencies. 【Features】 - Rated output: 30kW / Storage capacity: approximately 73.7kWh - Contributes to BCP measures for facilities and businesses, as well as reducing environmental impact through self-consumption - Compact outdoor installation type that does not require housing storage This industrial storage system is characterized by its compatibility with PV systems, allowing the PV power conditioner to operate independently during power outages without entering self-operation mode, enabling normal power generation. It can handle prolonged power outages in conjunction with solar power generation. Additionally, during normal operation, it allows for efficient power usage through peak cut and peak shift. With a 30kW output, it can supply electricity to three-phase power sources, making it possible to operate large air conditioners, commercial refrigerators, elevators, machine tools, large motors, pumps, and more during power outages. *For more details, please refer to the materials. Feel free to contact us with any inquiries.*

• Secondary Cells/Batteries
• Lithium-ion battery
• Power storage device

Ideal for realizing a resilient society! Contributes to CO2 reduction and significantly reduces energy consumption through energy creation.

The industrial storage battery system <BLP> corresponds to the operation of the storage system defined in the resilience ZEB demonstration project. Our industrial storage battery system contributes to planning that integrates environmental considerations and crisis management, as well as the realization of efficient facility operation and energy solutions aimed at ZEB. By combining solar power generation and storage batteries, we effectively utilize renewable energy sources. This contributes to CO2 reduction and significantly decreases energy consumption through energy creation. Furthermore, in the event of a power outage due to a disaster, surplus electricity can be used, enabling autonomous energy security. 【Features】 ■ Effective utilization of renewable energy sources by combining solar power generation and storage batteries ■ Contribution to CO2 reduction (supporting decarbonization efforts) ■ Significant reduction in energy consumption through energy creation ■ Ability to use surplus electricity in case of a power outage, enabling "autonomous energy security" ■ Suitable for realizing a resilient society *For more details, please refer to the PDF document or feel free to contact us.

• Lithium-ion battery
• Other safety equipment
• Power storage device

It is a large-capacity industrial storage battery with a three-phase connection, output of 30kW, and 73.7kWh, ensuring a reliable power supply even during prolonged power outages!

To quickly implement a BCP during a disaster, it is necessary to secure a minimum level of infrastructure. Connex Systems' industrial storage system can be used for power equipment such as water supply pumps with a three-phase, three-wire output of 30kW. By incorporating a transformer, it can also support single-phase devices like lighting, televisions, and air conditioning, making it possible to back up commercial refrigerators and industrial pumps. Additionally, with a large capacity of 73.7kWh, this storage system/battery can reliably supply power even during prolonged outages. [Installation Locations] ■ Condominiums and Offices Power outages that may occur due to disasters can also lead to simultaneous water supply interruptions in condominiums. This is because electric pumps are used to deliver water to upper floors. It is one of the essential devices that would be problematic if stopped during a disaster, as it is used in a wide range of facilities from buildings and hotels to food factories. Connex Systems' industrial storage battery can supply electricity to three-phase power sources with an output of 30kW, allowing for the backup of three-phase equipment such as electric pumps. *For more details, please refer to the PDF materials or feel free to contact us.

• Lithium-ion battery
• Power storage device
• Multifunction printer

Introducing industrial storage batteries for BCP measures in locations that can serve as disaster prevention bases or evacuation centers during emergencies! (National Resilience)

Abandoned schools and roadside stations are gaining attention as evacuation sites and disaster prevention bases for residents during emergencies. By installing industrial storage battery systems at these disaster prevention bases, the region's disaster resilience can be enhanced. When solar power generation is introduced simultaneously, it is possible to supply power to specific loads from the generated electricity and the capacity of this product, enabling a response to long-term power outages. It can be installed in a compact outdoor setup that does not require housing, saving space. [Installation Locations] ■ Public facilities, government offices, community centers, schools, elderly care facilities, roadside stations, commercial facilities, supermarkets, etc. [Achieving Disaster Preparedness and Energy Savings with Industrial Storage Batteries] By combining solar power generation and storage batteries, natural energy sources can be effectively utilized. This can lead to benefits such as reducing CO2 emissions and fulfilling CSR (Corporate Social Responsibility), adding value to energy savings and BCP (Business Continuity Planning) measures. *For more details, please refer to the PDF materials or feel free to contact us.

• Secondary Cells/Batteries
• Lithium-ion battery
• Power storage device

A compact outdoor installation type that does not require housing storage!

The industrial storage system <BLP> from Connex Systems is an outdoor installation type that can accommodate both emergency power supply and daily self-consumption. It is an industrial storage system that contributes to BCP measures for public facilities and businesses, as well as to reducing environmental impact and contributing to the community. This compact outdoor installation integrates the PCS and battery enclosure, contributing to space-saving. The capacity required for emergencies can be reasonably increased as needed, making it suitable for BCP applications. 【Features】 - Compact outdoor installation type that integrates the PCS and battery enclosure - Contributes to space-saving - Rated output of 30kW / storage capacity of approximately 73.7kWh - Contributes to BCP measures for facilities and businesses, as well as reducing environmental impact through self-consumption - A system well-suited for BCP applications With an output of 30kW, it can supply electricity to three-phase power sources, making it possible to operate large air conditioners, commercial refrigerators, elevators, machine tools, large motors, pumps, and more during power outages. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment
• Power storage device

Cost reduction and reduction of environmental impact! Control "maximum demand" to contribute to lower electricity costs. Reliable BCP and power outage measures with solar power generation equipment and storage batteries!

Are you struggling with energy conservation in warehouses, factories, or large commercial facilities? ○ Rising electricity costs ○ Rising fuel costs ○ Specific energy-saving measures, etc. As the demand for more efficient energy use and management increases, the introduction of storage batteries is highly effective for energy conservation measures in warehouses and factories. When combined with solar power generation, it becomes an effective solution for reducing facility costs, addressing environmental impact issues, and disaster preparedness. Additionally, it serves as an effective means of ESG investment, contributing to an increase in corporate value. The introduction of industrial storage systems, when combined with solar power generation, is very effective as an energy conservation measure for facilities and also contributes to reducing electricity costs. By forcibly discharging during peak usage times, it controls "maximum demand" and helps reduce electricity costs. Furthermore, with scheduled settings, charging and discharging of generated power can be done by time zone, achieving peak shift effects. [Implementation Locations] ■ Environmental measures and energy conservation applications for factories, warehouses, and large commercial facilities *For more details, please refer to the PDF document or feel free to contact us.*

• Secondary Cells/Batteries
• Lithium-ion battery
• Power storage device

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

The Ministry of Land, Infrastructure, Transport and Tourism has initiated various construction projects, and safety management and improvement of working conditions during the extreme heat of summer have become significant themes at civil engineering sites. Even as the concept of summer work stoppages spreads, it is important not to rely solely on stoppages but to focus on innovative temporary materials to improve daily site conditions. Hyper CLT sheets are civil engineering materials that utilize wooden CLT. They can be used in various civil engineering sites as a substitute for steel plates, including temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways. The 5×10 sheet weighs approximately 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to handle with small machinery, which helps reduce the burden of installation and removal. Thanks to the unique properties of wood, these sheets can help minimize glare compared to steel plates, making them useful for heat stroke prevention measures and environmental considerations during the summer. Additionally, they are expected to provide benefits in terms of construction efficiency and site environment, such as improved transportation efficiency and noise reduction. As a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS "TH-250021-A," they are also recommended for creative proposals in public works. Please consider them as a new option for civil engineering sites looking to address heat-related issues, including summer work stoppages. We also accept inquiries for consultations on implementation tailored to site conditions and requests for materials. We can provide proposals for public works and private civil engineering projects both within and outside Okayama Prefecture. Please feel free to contact us.

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching doorknobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot in front of it. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing types "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with a wide opening, vertical beam type "PF-01S" ○ Slim type with a wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

In recent years, as infectious diseases have spread, there has been a demand for products that enable "contactless operation," and this trend has extended to environments where automatic doors were previously operated by touch switches. As the automation of doors and the non-contact operation of automatic doors become more widespread, do you have any of the following concerns? ☑ Although we have introduced automatic doors, they remain open due to people crossing frequently in busy areas. ☑ We implemented touch switches to reduce unnecessary opening and closing, but we are concerned about hygiene. ☑ Touch switches require battery replacements regularly since they are powered. The light beam touch sensor "HA-T401" allows automatic doors to open and close without physical contact, and its compact detection range makes it suitable for narrow passages and high foot traffic areas, contributing to energy savings and infection control. 【Benefits of Implementation】 ○ Adaptable to various door types with four different spot settings, ideal for busy roads and narrow passages. ○ Energy-saving effect with two setting modes that reduce unnecessary opening and closing of automatic doors. ○ Equipped with a light beam touch function, allowing doors to open and close simply by waving a hand, ensuring hygiene. ◎ For more details, please download the catalog or contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.