We have published materials regarding the use of subsidies limited to public facilities.

A large-capacity, compact industrial energy storage system <BLP> that corresponds to the operation of the energy storage system defined in the resilience ZEB demonstration project.

A large-capacity, compact industrial storage system compatible with the operation of the storage system defined in the Resilience ZEB demonstration project. ■ It is expected to reduce installation costs through subsidies limited to public facilities. A project promoting the introduction of autonomous and decentralized energy equipment, such as evacuation facilities, that simultaneously realizes regional resilience and decarbonization. Support for the introduction of renewable energy generation and storage systems in public facilities designated as evacuation facilities and disaster prevention bases. If introduced through a system that incurs no initial costs, priority selection is given, with subsidy rates of one-third for prefectures, ordinance-designated cities, and specified cities; one-half for solar power generation and cogeneration systems in municipalities; and two-thirds for remote islands. (Source: Ministry of the Environment website) ■ Features and Strengths ● Compatibility with PV Thanks to the pseudo-grid connection function, normal power generation is possible even during power outages without the PV power conditioner entering autonomous operation. ● Constructability Designed in a compact size that allows outdoor installation without the need for a separate enclosure, featuring a stainless steel casing with IP54 equivalent waterproof and dustproof properties. ● Expandability Up to four units can be connected in parallel within the same system, with a maximum output of 120kVA (30kVA output for each of the four during autonomous operation) / 294.8kWh.

• Other power sources
• Lithium-ion battery
• Power storage device

A disaster prevention, mitigation, and industrial storage system that ensures power supply during emergencies and supports daily self-consumption. Achieving groundbreaking price, performance, and safety!

The industrial storage system from Connex Systems, the BLP, is designed for outdoor installation and can accommodate both emergency power supply and daily self-consumption. Additionally, its compact design integrates the PCS and battery housing, contributing to space-saving. It is a system suitable for BCP applications that can be reasonably scaled up to meet only the necessary demands during emergencies. 【Features】 - Rated output: 30kW / Storage capacity: approximately 73.7kWh - Contributes to BCP measures for facilities and businesses, as well as reducing environmental impact through self-consumption - Compact outdoor installation type that does not require housing storage This industrial storage system is characterized by its compatibility with PV systems, allowing the PV power conditioner to operate independently during power outages without entering self-operation mode, enabling normal power generation. It can handle prolonged power outages in conjunction with solar power generation. Additionally, during normal operation, it allows for efficient power usage through peak cut and peak shift. With a 30kW output, it can supply electricity to three-phase power sources, making it possible to operate large air conditioners, commercial refrigerators, elevators, machine tools, large motors, pumps, and more during power outages. *For more details, please refer to the materials. Feel free to contact us with any inquiries.*

• Secondary Cells/Batteries
• Lithium-ion battery
• Power storage device

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

The Ministry of Land, Infrastructure, Transport and Tourism has initiated various construction projects, and safety management and improvement of working conditions during the extreme heat of summer have become significant themes at civil engineering sites. Even as the concept of summer work stoppages spreads, it is important not to rely solely on stoppages but to focus on innovative temporary materials to improve daily site conditions. Hyper CLT sheets are civil engineering materials that utilize wooden CLT. They can be used in various civil engineering sites as a substitute for steel plates, including temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways. The 5×10 sheet weighs approximately 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to handle with small machinery, which helps reduce the burden of installation and removal. Thanks to the unique properties of wood, these sheets can help minimize glare compared to steel plates, making them useful for heat stroke prevention measures and environmental considerations during the summer. Additionally, they are expected to provide benefits in terms of construction efficiency and site environment, such as improved transportation efficiency and noise reduction. As a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS "TH-250021-A," they are also recommended for creative proposals in public works. Please consider them as a new option for civil engineering sites looking to address heat-related issues, including summer work stoppages. We also accept inquiries for consultations on implementation tailored to site conditions and requests for materials. We can provide proposals for public works and private civil engineering projects both within and outside Okayama Prefecture. Please feel free to contact us.

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching doorknobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot in front of it. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing types "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with a wide opening, vertical beam type "PF-01S" ○ Slim type with a wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

In recent years, as infectious diseases have spread, there has been a demand for products that enable "contactless operation," and this trend has extended to environments where automatic doors were previously operated by touch switches. As the automation of doors and the non-contact operation of automatic doors become more widespread, do you have any of the following concerns? ☑ Although we have introduced automatic doors, they remain open due to people crossing frequently in busy areas. ☑ We implemented touch switches to reduce unnecessary opening and closing, but we are concerned about hygiene. ☑ Touch switches require battery replacements regularly since they are powered. The light beam touch sensor "HA-T401" allows automatic doors to open and close without physical contact, and its compact detection range makes it suitable for narrow passages and high foot traffic areas, contributing to energy savings and infection control. 【Benefits of Implementation】 ○ Adaptable to various door types with four different spot settings, ideal for busy roads and narrow passages. ○ Energy-saving effect with two setting modes that reduce unnecessary opening and closing of automatic doors. ○ Equipped with a light beam touch function, allowing doors to open and close simply by waving a hand, ensuring hygiene. ◎ For more details, please download the catalog or contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.