Introduction to the Universal Material Testing Machine "Strograph"

It is a universal testing machine with a maximum load capacity of 50 kN and 20 kN.

■We can also accommodate testing of engineering plastics. ■You can choose from a wide range of chucks (gripping tools) and jigs. ■It is possible to measure from tensile modulus* to elongation at break. (*Requires the optional high-precision extensometer.)

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices
• Strength Testing Equipment

It is a universal material testing machine with a maximum load capacity of 20 kN.

■ It is possible to conduct physical property evaluation tests such as tensile strength, compressive strength, and bending strength of a wide range of materials including plastics and rubber. ■ You can choose from a rich lineup of chucks (gripping tools) and fixtures. ■ Measurements can be taken from tensile modulus* to fracture elongation. (Note: A high-precision extensometer is required as an option.) ■ Stroke extension (300mm or 600mm) is also available as an option.

• Testing Equipment and Devices
• Strength Testing Equipment

This is a tabletop universal material testing machine with a maximum load capacity of 5 kN.

■It is possible to conduct physical property evaluation tests such as tensile strength, compressive strength, and bending strength of a wide range of materials including plastics and rubber. ■You can choose from a rich lineup of chucks (gripping tools) and jigs. ■It is compact and can be installed in a space-saving manner.

• Testing Equipment and Devices
• Strength Testing Equipment

This is a tabletop universal testing machine with a maximum load capacity of 1 kN. The E3-L can accommodate specimens with large elongation.

● It is compact and can be installed in a space-saving manner. ● The E3-L is suitable for strength testing of materials with high elongation, such as rubber and plastic films. ● The E3-S is suitable for strength testing of electronic components and packaging materials, syringe resistance testing, and food texture testing. ● You can choose from a wide lineup of chucks (gripping tools) and fixtures.

• Testing Equipment and Devices
• Strength Testing Equipment

It is a specialized machine for conducting tensile and compression tests on various materials under temperature conditions. Compared to a standard universal testing machine equipped with a constant temperature chamber, it can secure a longer stroke.

● A crosshead stroke of 900mm is secured within the constant temperature chamber. ● By adopting a double-door design, temperature changes during the loading and unloading of test specimens can be minimized. (Note: If equipped with a standard line elongation gauge, only a single door will be used.) ● A 4-station (4-piece) option is also available.

• Thermostatic chamber
• Strength Testing Equipment
• Environmental Test Equipment

It is a tensile testing machine equipped with a 4-point suspension and a constant temperature chamber (temperature range 40°C to 150°C).

● Tensile tests can be conducted on materials with high elongation in temperature environments (40℃ to 150℃). ● Up to four test specimens can be tested simultaneously. ● Since the crosshead is installed inside the chamber, the stroke between the chucks can be larger within the constant temperature chamber compared to a combined machine that attaches a constant temperature chamber to a standard tensile testing machine or universal testing machine.

• Testing Equipment and Devices
• Thermostatic chamber
• Strength Testing Equipment

If you set the test specimen on the tray, all processes from measuring the test specimen dimensions to chucking, measuring the elongation between reference lines, removing the test specimen, and data processing will be performed automatically.

● Up to 200 test specimens can be tested continuously, contributing to labor-saving and efficiency in measurement tasks. ● High-precision alignment tracking device (gauge for elongation between alignment lines) allows for accurate measurement from elastic modulus to fracture elongation. ● The internal mechanism for supplying test specimens automatically measures the width and thickness of the specimens. ● It is a compact, space-saving type. ● The specimen storage section uses a tray system for 40 specimens, making it easy to manage specimens and perform interrupted measurements (tray replacement during continuous testing).

• Testing Equipment and Devices
• Strength Testing Equipment

This is a testing machine that automatically conducts tensile tests on soft materials such as elastomers.

● By setting the test specimens on the tray, all processes from dimension measurement ⇒ chucking ⇒ gauge length extension measurement ⇒ removal of test specimens ⇒ data processing will be performed automatically. ● Continuous testing of 120 test specimens is possible. It contributes to labor-saving, efficiency improvement, and enhanced reproducibility in measurement tasks. ● A non-contact* (laser type) gauge length extension meter is available as an option. ● Compact space-saving design.

• Testing Equipment and Devices
• Strength Testing Equipment

It is a testing machine that conducts tensile tests on plastic films automatically.

●If you set the test specimens on the tray, all processes from dimension measurement ⇒ chucking ⇒ elongation measurement between reference lines ⇒ removal of test specimens ⇒ data processing will be performed automatically. ●Up to 100 test specimens can be tested continuously. This contributes to labor-saving, efficiency improvement, and enhanced reproducibility in measurement tasks. ●Compact space-saving design.

• Testing Equipment and Devices
• Strength Testing Equipment

Fully automatic tensile testing machine for rubber (with constant temperature chamber)

This is an automated testing machine designed for tensile testing of rubber in a temperature environment of -40 to 150℃ (inside a constant temperature chamber), aimed at automation and labor-saving. It can accommodate up to 120 test specimens. The specimen storage section is tray-style, making specimen management easy. When the temperature inside the chamber reaches the set temperature, the testing automatically begins. The test specimens set in the tray undergo fully automated testing according to the following sequence: 1. Measure the thickness of the test specimen in accordance with JIS K 6250. 2. Transport to the constant temperature chamber and hold at the set temperature for a specified time. 3. Transport to the measurement section, clamp with the specimen gripping device, and conduct the tensile test. The measurement of elongation is also performed automatically using a dedicated non-contact marking tracking device.

• Testing Equipment and Devices
• Thermostatic chamber
• Strength Testing Equipment

It is a fully automatic tensile testing machine for rubber, equipped with a dedicated constant temperature chamber.

●If you set the test specimens on the tray, all processes from measuring the test specimens to chucking, measuring elongation between reference lines, removing the test specimens, and data processing will be performed automatically. ●Up to 300 test specimens can be tested continuously. This contributes to labor-saving, efficiency improvement, and enhanced reproducibility of measurement tasks. ●Compact space-saving design.

• Testing Equipment and Devices
• Thermostatic chamber
• Strength Testing Equipment

This is a dedicated constant temperature chamber for the universal material testing machine (tensile and compression testing machine) "Strograph VG/VGS."

This is a dedicated constant temperature chamber for the universal material testing machine (tensile and compression testing machine) Strolograph VG series, available in six models: refrigeration method, liquid carbon dioxide method, and heater-only model. Additionally, a dedicated constant temperature chamber for the Strolograph S series is also available.

• Thermostatic chamber
• Strength Testing Equipment
• Environmental Test Equipment

High-precision gauge for measuring the elongation between standard lines from the tensile modulus of plastic test specimens to fracture elongation.

●Options for the tensile and compression testing machine, universal material testing machine "Strograph" ●Compatible with the measurement of tensile modulus of elasticity for plastic test specimens as specified by JIS, ISO, and others.

• Testing Equipment and Devices
• Strength Testing Equipment

This is a strain gauge-type wire elongation meter compatible with the measurement of the tensile elastic modulus of plastics.

●Options for the tensile and compression testing machine, universal material testing machine "Strograph" ●Compatible with the measurement of tensile elastic modulus for plastic test specimens as specified by JIS, ISO, and other standards.

• Testing Equipment and Devices
• Strength Testing Equipment

It is a standard type contact wire extension gauge.

Tensile, Compression, and Bending Testing Machine (Universal Testing Machine) Options for Strograf ■ Detection Method: Pulse Encoder ■ Gauge Lengths: 20, 25, 40, 50mm ■ Measurement Range: Up to 1000mm *For more details, please download the PDF or contact us.*

• Testing Equipment and Devices
• Strength Testing Equipment

It is a non-contact wire elongation gauge that uses a CCD camera system.

Tensile, Compression, and Bending Testing Machine (Universal Testing Machine) for Strograf Options ■ Detection Method: CCD Image Automatic Servo Tracking ■ Standard Line Spacing: 20, 25, 50mm ■ Measurement Range: 750% (Standard Specification) *For more details, please download the PDF or contact us.

• Testing Equipment and Devices
• Strength Testing Equipment

An air chuck for tensile testing with a maximum capacity of 10 kN, suitable for tensile tests of plastic specimens and similar materials.

This is an air-operated gripping device suitable for tensile tests of plastic test specimens and similar materials. ■ Maximum capacity: 10kN ■ Applicable: Plastics, etc. *There is also a version for 20kN. [Model BD-20K]

• Testing Equipment and Devices
• Strength Testing Equipment

Air chuck for tensile testing with a maximum capacity of 500N to 5kN, suitable for tensile tests of rubber specimens and similar materials.

This is an air-operated gripping device suitable for tensile tests of rubber specimens and the like. ■ Maximum capacity: B-11: 5 kN B-12: 1 kN B-13: 500 N ■ Applicable: Rubber and others

• Testing Equipment and Devices
• Strength Testing Equipment

A tensile testing chuck (gripping device) with a maximum capacity of 1kN to 20kN, suitable for tensile tests of materials such as plastic.

This is a gripping tool suitable for tensile testing of materials such as plastic. ■Capacity: 1kN to 20kN ■Applicable: Plastics and others

• Testing Equipment and Devices
• Strength Testing Equipment

A tensile testing chuck (gripping device) with a maximum capacity of 500N to 3kN, suitable for tensile tests of rubber and other dumbbell-shaped specimens.

This is a gripping tool suitable for tensile tests of dumbbell-shaped rubber specimens. ■ Capacity: 500N to 3kN ■ Applicable: Dumbbell-shaped rubber specimens

• Testing Equipment and Devices
• Strength Testing Equipment

A tensile testing chuck (gripping device) with a maximum capacity of 1kN to 3kN, suitable for tensile tests of dumbbell-shaped specimens made of rubber and similar materials.

This is a gripping tool suitable for tensile tests of dumbbell-shaped rubber specimens. ■ Capacity: 1kN to 3kN ■ Applicable: Dumbbell-shaped rubber specimens, etc.

• Testing Equipment and Devices
• Strength Testing Equipment

Grip device for tensile testing of threads and cords (air-tightening type)

●Can be used even in a constant temperature bath.

• Testing Equipment and Devices
• Strength Testing Equipment

A tensile testing chuck (gripper) with a maximum capacity of 100N to 5kN, suitable for tensile tests of paper, plastic films, and the like.

This is a gripping tool suitable for tensile tests of paper, plastic films, and the like. ■ Capacity: 100N to 5kN ■ Applicable: Paper, films, etc.

• Testing Equipment and Devices
• Strength Testing Equipment

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall