We will be exhibiting at Mecatronics Tech Japan 2021 from October 20 (Wednesday) to October 23 (Saturday)!

By newly introducing a stepping motor and a coupling-less structure, we enable improved production efficiency of manufactured parts and reduced purchasing costs for sensing heads!

The tool breakage detection device from Kyokuto Machine Tool has successfully achieved a longer lifespan by incorporating a stepping motor and a gear-coupling-less structure. Additionally, the exchange span of the sensing head has been extended, resulting in improved production efficiency of manufactured parts and cost reduction due to lower purchasing costs. Furthermore, by rotating the needle attached to the tip of the sensing head, breakage can be reliably detected through contact with the tool, allowing the machine to be stopped instantly. 【Features】 ○ Reliable breakage detection ○ Physical contact detection ○ Simple setup of the control unit ○ Simple control circuit ○ Cost reduction For more details, please contact us or download the catalog.

• Other machine tools

Ideal for micro-machining! Achieves deburring of holes and double-sided machining in one pass, which was difficult with conventional tools!

The "Bar Off Tool" is a tool suitable for deburring and chamfering curved surfaces such as cross holes and lateral holes in pipes. It demonstrates high efficiency in mass production processing using dedicated multi-axis machines. The spindle simultaneously chamfers both sides of the hole in one pass while rotating in the forward direction. Since the tool itself performs automatic chamfering, the operator does not need to be highly skilled. 【Features】 ■ Simultaneously chamfers both sides of the hole in one pass while the spindle rotates in the forward direction ■ The tool itself performs automatic chamfering, so the operator does not require advanced skills ■ Demonstrates high efficiency in mass production processing using dedicated multi-axis machines ■ Particularly suitable for deburring and chamfering curved surfaces such as cross holes and lateral holes in pipes ■ Exhibits power in cases where chips tend to entangle *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools

A labor-saving tool for chamfering and deburring the front and back of through holes in one pass!

The "Barawate Tool" features a blade exchange system that allows for the selection of "double-sided chamfering" and "backside chamfering." It accommodates a wide range of materials from aluminum to stainless steel. Adjusting the chamfering amount according to the work material is easy. Additionally, it can be used under the same conditions as drilling with a twist drill. 【Features】 ■ Blade exchange system allows for selection of "double-sided chamfering" and "backside chamfering" ■ Easy adjustment of chamfering amount according to work material ■ Accommodates a wide range of materials from aluminum to stainless steel ■ Can be used under the same conditions as drilling with a twist drill ■ No special tools or jigs are required *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.