FOOMA JAPAN 2021 After Exhibition (Web Exhibition) Information

For those struggling with the dissolution and dispersion of powders! We propose a powder dissolution device that uses CombiMix® to uniformly mix powders and liquids into a slurry.

【Vacuum-type Powder Dissolution System】 This system creates a vacuum state inside the CombiMix® tank and draws in powder through the bottom valve. It dissolves and disperses powders such as silica, resin powder, tantalite, and pigments in a short time. <The vacuum inside the tank allows for the suction of powder raw materials> ◎ No entrapment of air bubbles! ◎ Prevents the formation of lumps! ◎ Reduces processing time! ◎ No powder adhesion around the liquid surface! ◎ Prevents the scattering of powder within the factory! ◎ Optimal conditions can be set (automated) according to the processed materials! *For more details, please download the catalog or contact us.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

Effective for the dispersion and mixing of high-viscosity materials such as thickening agents! This newly developed mixer (patent obtained) breaks down clumps with high shear force and mixes the entire batch uniformly.

**Features** - Capable of dispersing and mixing high-viscosity materials. - Efficiently flows the processing liquid and foam through "three-dimensional wings" and "S-shaped effects." - Excellent suction from the axial direction and discharge in the radial direction, ensuring uniform mixing throughout. - Effective for dispersing and mixing materials that tend to float near the liquid surface or settle at the bottom of containers. - A turbine with a three-dimensional structure that allows foam and processing liquid to flow naturally. ◆◇━━━━━━━━━━━ 　　　Testing Now Available! ━━━━━━━━━━━━◇◆ If you have materials that are difficult to disperse or homogenize, please give it a try. Feel free to contact us if you wish to request a test.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

Telecorta has been renewed to be even more resistant to high viscosity! It demonstrates effectiveness in dissolution, dispersion, and mixing for high viscosity stirring (patent obtained). Testing is currently being accepted.

The Telecolta R is a stirring blade that generates a strong liquid flow by adopting a propeller shape while possessing dispersion power equivalent to that of a homodisperse. It exhibits strong dispersion power with the main wings that have their tips bent, and the auxiliary wings, which are slightly larger in diameter than the main wings, help reduce the entrapment of bubbles. It has been renewed to be even more effective for high-viscosity materials! *Testing for the Telecolta R is currently being accepted. For more details, please contact us using the form below.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

In a civil engineering site material yard, not only is material storage conducted, but also the frequent movement of trucks and heavy machinery, unloading, and the movement of workers. On unpaved ground, mud and ruts can occur due to rain, which may reduce work efficiency. Hyper CLT mats are civil engineering CLT materials that utilize wood CLT. By laying them in material yards or storage areas, a work space that facilitates the movement of vehicles and heavy machinery can be established while protecting the ground. They can be laid only in necessary locations, and relocation or repurposing in accordance with construction progress is also possible. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery. After use, they can also be utilized as temporary roads, access routes, or heavy machinery work yards. Additionally, they offer unique benefits of wood, such as glare reduction, noise suppression, and CO2 fixation. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," these wooden mats can also be used for environmental improvement in material yards and innovative public works.

Features: ● Equipped with Intel Core Processor (Series 3) ● Onboard LPDDR5 memory: up to 24GB ● Onboard UFS storage: up to 256GB ● 2.5GbE (2.5 Gigabit Ethernet): 1 port ● HDMI 2.1 (TMDS): 1 port ● USB 3.2 Type-A: 3 ports ● 10-pin GPIO: 1 port ● Power input: 12V DC * This model does not include an operating system.

Features: ●CPU: Intel Core Processor (Series 3) ●Onboard Memory: Onboard LPDDR5 (up to 48GB) ●Onboard Storage: Onboard UFS (up to 256GB) ●LAN: 2.5GbE ×2 (Intel Ethernet Controller I226-IT) ●USB: USB 3.2 Type-A ×2, USB 3.2 Gen 2x2 Type-C ×1 ●GPIO: 40-pin GPIO ×1 ●Video Output: HDMI 2.1 (TMDS) ×2, DP 1.4a (via USB Type-C) ●Serial Port: RS-232/422/485 (10-pin header) ×2 ●Expansion Slots: M.2 2230 E-Key ×1, M.2 2280 M-Key ×1, M.2 2242 M-Key ×1 ●Security: TPM 2.0 ●Power Input: DC 12–24V input

Features: ● Equipped with Intel Core Processor (Series 3) ● Onboard LPDDR5 memory: up to 48GB ● Onboard UFS storage: up to 256GB ● 2.5GbE (Intel Ethernet Controller I226-IT): 2 ports ● USB 3.2 Type-A: 2 ports ● USB 3.2 Gen 2x2 Type-C: 1 port ● 40-pin GPIO: 1 port ● HDMI 2.1 (TMDS): 2 ports ● DisplayPort 1.4a: via USB Type-C ×1 ● RS-232/422/485 serial ports: 2 ports ● M.2 2230 E-Key: 1 slot ● M.2 2280 M-Key: 1 slot ● M.2 2242 M-Key: 1 slot ● Equipped with TPM 2.0 (Trusted Platform Module) ● Input power: DC 12–24V * This is a model without an operating system.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without the application of heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.