[New Catalog] Self-Propelled Stirring and Defoaming Device "High-Rotor Series" Comprehensive Catalog

It is a device that removes bubbles contained in the material filled in the syringe using centrifugal force and vacuum.

We would like to introduce our "Vacuum Syringe Centrifugal Defoaming Machine." Syringes are set on a table that rotates at high speed under vacuum. This device removes bubbles contained in the materials filled in the syringes using centrifugal force and vacuum. The syringes that can be mounted are 30cc, 50cc, 70cc, 6oz, 8oz, 12oz, and 20oz, so please feel free to consult with us. 【Features】 ■ Set multiple syringes on a table that rotates at high speed under vacuum ■ Remove bubbles contained in the materials filled in the syringes using centrifugal force and vacuum ■ Compatible syringes: 30cc, 50cc, 70cc, 6oz, 8oz, 12oz, 20oz * Please consult with us ■ Number of syringes that can be mounted: 2 to 32 * For more details, please refer to the PDF document or feel free to contact us.

• Deaeration device

Filling multiple syringes without air bubbles under vacuum! Introduction of a large vacuum syringe filling machine.

The "FIL100-V" is a device that sets materials dispersed and defoamed with a high-low rotor into containers and fills multiple syringes without incorporating air bubbles under vacuum conditions. The syringes that can be mounted are 30cc, 50cc, 70cc, 6oz, and 8oz. Please consult us regarding container sizes, syringe sizes, and the number of syringes. 【Features】 ■ Set materials dispersed and defoamed with a high-low rotor into containers ■ Fill multiple syringes without incorporating air bubbles under vacuum conditions ■ Mountable syringes: 30cc, 50cc, 70cc, 6oz, 8oz *Please consult us ■ Number of syringes that can be mounted: 1 to 5 ■ Maximum container size for filling materials: 10L *For more details, please refer to the PDF document or feel free to contact us.

• Filling and bottling machines

Suitable for research and small batch production for filling small vials and small syringes!

The "Awa Zero ni Tsumeru-kun COSFI13" is a device that sets materials that have been dispersed and degassed with a high rotor into a container, performs vacuuming before filling, and continuously fills syringes one by one without incorporating air bubbles. The compatible syringes are 30cc, 50cc, and 70cc. It is suitable for research and small batch production for small batches and small syringes. 【Features】 ■ Set materials that have been dispersed and degassed with a high rotor into the device with the container ■ Perform vacuuming before filling and continuously fill syringes one by one without incorporating air bubbles ■ Compatible syringes: 30cc, 50cc, 70cc *Please consult us ■ Maximum container size for filling materials: 1.3L ■ External dimensions: 450W × 240B × 655H *For more details, please refer to the PDF materials or feel free to contact us.

• Filling and bottling machines

The long-awaited 300ml x 4 bottle model has arrived for research lab machines and small-scale production machines.

The "High-Rotor HR003-04A/V" is a stirring and degassing mixer that utilizes a self-rotation and revolution planetary method, capable of dispersing and degassing high-viscosity materials. By generating a high stirring force with a "self-rotation to revolution ratio of 2:1," it achieves reduced stirring time and improved efficiency in development and inspection tasks. It can set up four bottles simultaneously, making it ideal for small-batch production processes with a variety of products. 【Features】 ■ High stirring power that accommodates a wide range from high to low viscosity ■ High degassing capability with a vacuum level of 40Pa ■ Usable with desired containers such as syringes and disposable cups ■ Sample testing and paid rental options are available *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Mixer/agitator

When considering cost reduction at civil engineering sites, it is important to compare not only the purchase price of materials but also transportation costs, heavy machinery costs, and the personnel and time required for installation and removal. Hyper CLT sheets are civil engineering CLT materials that utilize laminated CLT. They can be used as an alternative to steel plates for temporary roads, access roads, heavy machinery work yards, material storage areas, and measures against muddy conditions. The 5×10 sheet weighs approximately 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to increase the number of sheets transported at one time, which leads to a reduction in transport frequency and transportation costs. They are also easy to handle with small machinery, which helps reduce the burden of using large cranes and installation work. Repeated reuse can also be expected to reduce material costs per site. Furthermore, there are added values unique to wood, such as glare and noise reduction, and CO2 fixation. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," these wooden sheets can be utilized for cost improvements that combine construction efficiency, environmental consideration, and creativity.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

We have published two application pages for the non-contact, camera-less monitoring sensor "MotionCatch." You can view them from the related products section below. 【Published Pages】 - MotionCatch | Non-contact monitoring sensor for public facilities SE - MotionCatch | Smart home monitoring sensor SE 【Features of MotionCatch】 - Detects human movement non-contact using millimeter-wave radar and AI. - No cameras used and no video recording. Provides monitoring with consideration for privacy. - Palm-sized. Simply install on walls or ceilings without the need for wiring (USB powered, Wi-Fi). - The detection range of one unit is approximately 6m x 4m. It is suitable for monitoring "by room" rather than the entire floor. We are accepting inquiries regarding installation conditions and trial implementations (PoC). *No video is recorded. This is a product designed to assist monitoring and is not a medical device.

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.