YouTube video about rupture discs for FPSO use.

Reusable rupture disk. [Exhibiting at INCHEM TOKYO 2025]

The KUB type is a long-lasting rupture disk. The KUB type is a special rupture disk that is extremely robust and high-performance, with the burst pressure defined by the Euler formula's buckling load calculation method. Unlike rupture disks manufactured by weakening part of the material, it is a product of REMBE's unique high technology that incorporates a buckling pin for precise full bore opening. Additionally, it features a smooth surface without weakened areas in the disk material, making it very robust and eliminating the risk of damage from misoperation, incorrect installation, or drops (from a height of about 1 meter). With a two-layer structure consisting of a seal membrane layer and a burst layer, the surface of the seal membrane layer that comes into contact with the process medium is smooth and free of scratches. It uses a highly sealable diaphragm, minimizing the risk of damage due to corrosion. The KUB type, with a maximum operating pressure ratio of 98%*, is designed to be strong against metal fatigue not only for high-pressure applications but also under harsh process conditions for gas, steam, liquid, and two-phase flow applications. Its unique manufacturing method allows it to be used even for liquid-only applications, greatly diversifying installation locations and simplifying installation, maintenance inspections, and procurement processes. *Varies by application.

• Piping Materials
• Pneumatic Equipment

Low rupture height and high performance.

The STAR type is a high-performance tensile rupture disk with a low burst height, robust design, and a unique star-shaped opening pattern in a three-layer structure. The STAR type is suitable for low to high pressure and accommodates a wide range of processes. It meets the necessary processes in the oil and gas, chemical, and pharmaceutical industries, and its unique structure provides excellent performance and durability even in harsh operating environments where other types of rupture disks may burst prematurely. The STAR type has a long lifespan, minimizing the costs associated with replacements and downtime. 【Benefits of Use】 ★ Robust, low burst height design – Ensures excellent performance and long lifespan even under pressure cycling or vacuum conditions. ★ Excellent corrosion resistance and high cost-effectiveness – The rupture layer, which plays a critical role, does not come into contact with the process media, allowing for the use of various materials without affecting performance, leading to overall cost reduction. ★ Easy installation and reduced holder costs due to the unique star-shaped structure and low burst height design. ★ Minimal risk of fragment dispersion even under high burst pressure.

• Other machine elements
• others

Contributing to reduced downtime through the use of cutting-edge CPL technology.

The SFD type (S = Sublimated; FD = Forward) is a versatile rupture disk suitable for use under various process conditions. It is manufactured using REMBE's proprietary "Contour Precision Laser Ring (CPL) technology," which eliminates common industrial concerns such as early rupture due to mechanical scoring, corrosion of the scored area, and pinholes. If unexpected issues arise, costly downtime may occur. The CPL technology extends the lifespan of the rupture disk, ensuring the highest quality and precise rupture operation control even under the most severe environmental conditions. 【Benefits of Use】 ★ Low burst pressure design – Excellent protection for safety valves ★ Suitable for gas, two-phase flow, and viscous media, maximizing the number of installation locations ★ Capable of accommodating a wide range of process conditions – Using the same type of rupture disk leads to significant benefits in installation, procurement, and maintenance inspections ★ The manufacturing method using precision laser technology reduces downtime caused by early rupture due to mechanical scoring, corrosion of the scored area, and pinholes.

• Other machine elements
• others

High performance for low pressure applications

The ODV type is a three-layer structure tensile rupture disk designed primarily for low to medium pressure applications. The three-layer structure consists of an upper rupture layer (O), a seal membrane layer (D), and a vacuum support layer (V) facing the process. It provides a high level of performance and durability, making it a cost-effective solution for a wide range of process conditions. The rupture layer, which plays a crucial role in determining the rupture pressure for accurate full-bore rupture release, is manufactured using REMBE's unique production process with precision laser technology. The ODV type is an excellent pressure relief solution for process conditions across various industries. It can operate under conditions with a relief pressure as low as 0.05 bar g, making it suitable for gas, vapor, liquid, and two-phase flow applications. The tensile rupture disk ODV type, which can be mounted at a seat angle of 30°, features a design that prevents fragment dispersion and is available in nominal diameter sizes from DN20 to DN600 (3/4"-24"), making it an ideal solution to meet various process conditions. 【Applications】 ★ Power plants, turbines, condensers, chemical industry, petrochemical industry, process vessels, chemical reactors, storage tanks, refineries, etc.

• Other machine elements
• others

Minimization of downtime and exceptional performance through advanced CPL technology.

The IKB type is a cost-effective inverted rupture disk suitable for various applications and a wide range of processes. It provides diverse solutions tailored to the needs of the entire plant. The IKB type rupture disk is specially designed to protect pressure vessels, piping systems, gas cylinders, reactors, and more from overpressure. The IKB type is a unique inverted rupture disk manufactured using REMBE's proprietary "Contour Precision Laser Ring (CPL) technology." This technology ensures the highest quality and precise burst operation control even under the most extreme environmental conditions. The IKB type features precision sublimation processing that does not affect the crystalline structure of the material, resulting in a disk design with no fragment dispersion at the full bore opening. It has a 95%* operating pressure ratio, excelling in harsh high-cycle applications and enabling the longevity of the plant. *May vary depending on the application.

• Other machine elements
• others

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.