We will exhibit at the Domestic Frontier Industry Messe 2021.

Precision machining of plastic, super engineering plastics, and FRP is possible! From prototyping to mass production, we offer a consistent service from material selection to delivery according to your needs!

Our company specializes in precision machining of various plastics, engineering plastics, insulators, thermosetting resins (such as Bakelite and epoxy glass), and insulation boards. We accept design, manufacturing, and processing of engineering plastics, insulators, thermosetting resins, and insulation boards starting from a minimum of one prototype. 【Overview】 ■ Achieving precision machining of ±0.01mm ■ Temperature control within the factory at 23°C for plastics with a high coefficient of linear expansion ■ A lineup of Okuma-made gantry, machining, and combined processing machines, as well as lathes ■ Capable of mass production from 1 to about 10,000 pieces ■ Also handling insulating resins, antistatic resins, and conductive resins ■ A variety of insulation boards for molds, molding machines, and press machines are also available 【Do you have any of these concerns?】 ◎ Struggling to identify the type of plastic... ◎ Unable to find a place that can perform precision machining of engineering plastics or FRP... ◎ No place that can handle 3D (5-axis) machining... * If you send us your drawings, we will provide a quote. * You can download a list of the resins we handle.

• Other machine elements

Precision cutting of insulating materials, FRP, and thermosetting resins is possible! From single pieces to mass production, we handle everything consistently from material selection to delivery according to your needs!

Our company specializes in precision machining of insulating materials and thermosetting resins (Bakelite, epoxy glass). We accept design, manufacturing, and processing of insulating materials and thermosetting resins starting from just one piece. 【Overview】 ■ Precision machining with a tolerance of ±0.01mm is possible ■ Mass production from one to about ten thousand pieces is also available ■ We also handle insulating resins, antistatic resins, and conductive resins 【Are you facing any of these issues?】 ◎ Struggling to identify the type of FRP... ◎ Unable to find a place that can perform precision machining of insulating materials... ◎ Can't find a place that can do 3D machining of FRP... * If you send us your drawings, we will provide a quote. * You can download a list of the resins we handle.

• Composite Materials
• Other polymer materials

Super engineering plastics and thermosetting resins can be processed into complex shapes such as impellers using a simultaneous 5-axis machining machine.

Our company owns a 5-axis multi-tasking machine, the "OKUMA MULTUS U3000." With a maximum diameter of Φ650 and a distance between centers of 1,500mm, it can perform high-precision multi-surface machining with one chucking, and high-precision machining on six surfaces is also possible with synchronized opposing spindles. We can process complex shapes and large precision parts made from thermosetting resins such as epoxy glass and bakelite, as well as super engineering plastics like PEEK and polyimide. 【Features】 ■ Machining area of up to Φ650×1500mm ■ Capable of thin plate machining ■ Complex shapes such as impellers ■ Diagonal hole machining on cylinders is also possible ■ High-precision 5-surface machining and high-precision 6-surface machining with synchronized opposing spindles *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines
• Machining Center
• Processing Contract

It is possible to process thermoplastic plastics, super engineering plastics, large-scale processing of thermosetting resins, simultaneous five-axis machining, and precision machining of thin plates using an air suction device.

Our company owns one of the largest gantry machining centers in the industry, the "OKUMA MCV-All." It achieves a flatness of 0.01mm per 1000mm in plate thickness. The effective door width is 1,650mm, and the size of the table working surface is 3,100×1,200×1,280mm. Additionally, it has a maximum machining area of 3000×1600mm, allowing for the processing of thermosetting resins such as epoxy glass, as well as complex shapes and large precision machined products. 【Features】 ■ Maximum machining area of 3000×1600mm ■ Capable of thin plate processing ■ Achieves a flatness of 0.01mm per 1000mm in plate thickness ■ Effective door width: 1,650mm ■ Size of the table working surface: 3,100×1,200×1,280mm ■ Travel distance (X×Y×Z): 3,000×1,600×450mm *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines
• Machining Center
• Processing Contract

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

Yazaki Energy System will be exhibiting at the "14th Agricultural WEEK (commonly known as J-AGRI)" held at Makuhari Messe. In response to challenges surrounding agriculture, such as record heat and soaring energy prices, our company proposes an agricultural system that utilizes surplus solar heat and waste heat from factories during the summer to support stable cultivation throughout the year, from winter heating to summer cooling. ■ Exhibition Details (Booth Number: 25-47) <Closed-type Agricultural House> Results from the second season and initiatives for the third season <Localized Cooling in Solar-Powered Agricultural Houses> Mechanism of substrate cooling, comparison of energy consumption with spatial cooling, growth conditions this summer <Cooling and Heating with Solar Heat> Examples of crown heating and house cooling, utilization of surplus heat in summer <Cooling of Crops and Workers with Well Water> Exhibition of a prototype well water cooler and proposals for the use of cooling jackets When you visit, please be sure to stop by our booth.

We would like to inform you about the autumn and winter internship opportunities for the 2028 graduates. 1. Open Company Dates: October 23, 2026 (Friday), November 11, 2026 (Wednesday), December 10, 2026 (Thursday), January 21, 2027 (Thursday) Time: 13:30 - 15:30 Location: Online (Microsoft Teams) 2. 1-Day Job Experience Dates: November 17, 2026 (Tuesday), December 16, 2026 (Wednesday) January 15, 2027 (Friday), January 27, 2027 (Wednesday), February 4, 2027 (Thursday), February 10, 2027 (Wednesday), February 18, 2027 (Thursday) Time: 10:00 - 17:30 (tentative) Location: Takaya Corporation Headquarters (661-1 Ibara-cho, Ibara City, Okayama Prefecture)

Notice of participation in the "FOOD Expo 2026." 【Date and Time】 　November 11 (Wednesday) - 13 (Friday), 2026 　Opening hours: 10:00 AM - 5:00 PM 【Venue】 　Tokyo Big Sight 　East Hall 2, Booth Number B-36 【Exhibits】 　Cardboard insulated boxes 　Craft cooler cubes 　Vacuum insulated panel 　Pallet cubes

[Lecture Topics] 1. Co-creation Strategy to Deliver AI to the Field - Business Development and Joint Ventures in the Era of Generative AI and Physical AI Mr. Haruto Suzuki, Industrial and Regional Research Department, Development Bank of Japan 1. The Mechanism of Generative AI and Its Current Utilization by Companies 2. Expansion of the Generative AI Market and AI Infrastructure 3. Transition from Generative AI to Physical AI 4. Bottlenecks in Social Implementation and Solutions through Joint Ventures 5. Formation of an Implementation Ecosystem through Policy and Finance 6. Q&A / Business Card Exchange 2. Needs, Development Trends, Future Possibilities, and Challenges of Physical AI Mr. Kazushi Asama, Senior Researcher, Next-Generation Robot Research Organization, Waseda University / Emeritus Professor, University of Tokyo 1. What Physical AI Means 2. Needs for Physical AI and the Technological Trends of Generative AI Behind It 3. Development Trends of Physical AI 4. Future Possibilities and Challenges of Physical AI 5. Q&A / Business Card Exchange