(Free) Instron WEB Seminar Series: Static Testing Machine Series: Universal Material Testing Machines and Testing Methods for Medical Devices

Achieves high safety without compromising testing capacity! Supports various tensile, compression, and bending tests from low capacity (500N) to high capacity (300kN).

The "6800 Series" is a universal material testing machine designed to enhance safety levels more than ever before, protecting operators, testing machines, and test specimens without placing a burden on testing processing capabilities. The lineup has been further enriched with the addition of high-capacity (100kN, 300kN) floor-mounted models! 【Enhanced Safety Features】 ■ Operator Protection ■ Test Status Display via Indicator ■ Smart Close Air Circuit 【Advanced Testing Functions】 ■ Synchronized Data Sampling at Speeds up to 5kHz ■ Latest Handset ■ Latest Features Linked with Dedicated Software Bluehill Universal 【Customizability】 ■ Wide Range of Accessories ■ Custom Frames (Width and Height Extensions) *Please feel free to contact us for more details.

• Testing Equipment and Devices

Introduction of application examples for material testing of surgical products.

Instron is a leading global supplier of mechanical testing systems suitable for tensile, compression, bending, peeling, tearing, friction, torsion, and fatigue tests. Hospital and surgical products are often consumables designed for single use by patients. Catheters, guidewires, venous lines, tubes, and wound closure products such as bandages, sutures, and staples all fall into this category. Mechanical testing of these products is particularly important to ensure that characteristics such as appropriate tensile strength, low friction force, and sufficient elongation are suitable for their intended use. 【Features】 ■ Reliability ■ Expertise ■ FDA Compliance ■ Space-saving Design *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Strength Testing Equipment

We provide a fixture package to test all ten items of ISO11040-4!

Pre-filled syringes are generally tested based on ISO 11040-4. Glass syringes are more susceptible to breakage than plastic syringes, so a wider variety of tests are required based on ISO 11040-4. There are a total of ten annexes within ISO 11040-4, each requiring different testing methods. Some of the annexes require rotational motion, so the "ISO 11040-4 fixture" is designed to be compatible with simple tensile, compression, and Torsion Add-On systems. [Strengths of Instron Testing Machines (Partial)] ■ The fixtures are designed to perform various tests with minimal fixtures. ■ The fixtures adopt a modular design to minimize the number of necessary parts. ■ Instron's service department supports the introduction of testing machines. ■ Reduces operator training time. *For more details, please refer to the PDF document or feel free to contact us.

• Inspection fixture
• Processing Jig
• Assembly Jig

Providing traceability for inconsistent data! Compatible with new systems and existing systems.

We would like to introduce the traceability feature of our software, "Bluehill Universal." This feature allows users to meet the audit requirements related to FDA 21 CFR Part 11, ISO 17025, Nadcap, A2LA, and other relevant accreditation texts. By incorporating electronic signatures and approvals, file revision history, and automated secure audit trails, this powerful additional feature provides traceability for non-conforming data. [Traceability Features] - Bluehill Security - Revision History - Electronic Signatures - Audit Trails *For more details, please refer to the PDF document or feel free to contact us.

• Software (middle, driver, security, etc.)
• Other embedded systems (software and hardware)

Introducing application examples of material testing for parts and components of medical products, as well as final products.

Instron is a leading global supplier of mechanical testing systems suitable for tensile, compression, bending, peeling, tearing, friction, torsion, and fatigue tests. In many cases, mechanical testing of pharmaceutical products consists of tests for pill crushing, hard and flexible package testing, syringes, autoinjectors, and vials, as well as testing of drug delivery systems such as inhalers and transdermal patches. Mechanical testing of these products is particularly important to ensure characteristics such as appropriate dosage, drug delivery time, package integrity, and safety requirements of the package, such as child-proof opening mechanisms. 【Features】 ■ Reliability ■ Expertise ■ FDA Compliance ■ Space-saving Design *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices
• Strength Testing Equipment

It is a testing machine with a space-saving design that allows for the simulation of the twisting characteristics of products in real-use environments, thereby reducing the time required for product development.

The latest Torsion Add-On 3.0 is designed to enhance laboratory capabilities by allowing simple axial and torsion testing in one unit for the desktop models of the 6800 series and 5900 series. It expands product development capabilities and can simulate applications under actual use conditions. Many international testing standards, such as ISO11040-4, ISO80369, and ASTM F543, require control in both axial and torsional directions, making it possible to consolidate the necessary functions into one unit and streamline the testing process. It is ideal for testing the performance of various consumer products, packaged products, medical products, electronics, and automotive parts. ◆ Features Simulates the product's actual use environment Enhances product development speed Saves laboratory space

• Testing Equipment and Devices

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

【Seminar Overview】 The construction industry faces many challenges, including labor shortages, regulations on working hours, and the need for operational efficiency. Additionally, the aging workforce presents significant issues, and there is a concerning trend of high turnover rates among younger employees who are supposed to carry on the skills and knowledge. In this seminar, we will discuss the causes of turnover based on case studies and explain key points on how advancing IT can help reduce turnover rates.

Date: October 7, 2025 (Tuesday) to October 10, 2025 (Friday) - 4 days Opening Hours: 10:00 AM to 5:00 PM Venue: Tokyo Big Sight, East Halls 4-8 Booth Number: 7-126 Exhibited Machines: ■ Quantitative Molding → Deep Drawing Automatic Feeding Line VEMAG (Germany) Robot500 ... Quantitative Filling Machine VEMAG (Germany) ASV811 ... Cutting Device FANUC (Japan) Parallel Link Robot SEALPAC (Germany) RE23 ... Deep Drawing Vacuum Gas Replacement Packaging Machine FANUC (Japan) Collaborative Robot SMC (Japan) Hand ■ SEALPAC (Germany) Amax ... Fully Automatic Gas Replacement Tray Sealer * Digital Printing Top Film Videojet (Japan) UV Laser Marker Nikka Densok (Japan) Seal Leak Testing Device M-flex ... Semi-Automatic Rotating Gas Replacement Tray Sealer ■ Supervac (Austria) GK169B ... Belt-Type Chamber Machine GK402B ... Belt-Type Chamber Machine ■ Packaging Materials Hotel Pantry * Please note that the exhibited machines may change without prior notice.

【Exhibition Information】 Exhibition Name: Food Processing Technology Expo 2025 Date and Time: November 14, 2025 (Friday) 10:30 AM - 4:30 PM *Free entry and exit, pre-registration required Location: Osaka Industry Creation Center - We will showcase technical products using the factory deodorant "Deofure." - We will display the tofu defoamer "Tofu Up." - Other aromatic technical products will also be exhibited. *For more details, please refer to the materials.

Techne Measurement Co., Ltd. will exhibit at the "Kyushu Semiconductor Industry Exhibition" held at Marine Messe Fukuoka, Halls A and B, on October 8 (Wednesday) and 9 (Thursday), 2025. This time, we will showcase dew point meters, moisture meters, oxygen concentration meters, anemometers, temperature and humidity meters, and temperature and humidity/dew point calibrators for the semiconductor industry. Please be sure to visit the Techne Measurement booth. 　＿＿＿　　　　　　　＿＿＿ 　＼ ┌┴──────┴┐ ／ 　／ │Visitor Gifts│ ＼ 　￣ └────────┘ ￣ 　　 We are giving away the very popular 330ml spherical bottle of cute "Moisture Water"! Visitors who exchange business cards will receive water in the shape of our official character "Moisture" as a gift♪ It's a very cute bottle, so be sure to get one! Please be sure to visit the Techne Measurement booth.