(Free) Instron WEB Seminar Series: Fatigue Testing Machine Series: Proposal for Updating Fatigue Testing Machines with the Latest 8800MT Controller Features and Fatigue Testing Software.

Supports testing using a constant temperature bath! Reduces energy consumption by minimizing test time.

WaveMatrix utilizes self-heating control software for test specimens to optimize test frequencies, thereby improving the productivity and consistency of tests related to composite materials and polymer materials. It is possible to reduce test time while achieving unprecedented accuracy in test temperatures. This patented system achieves and maintains the specified test temperature by changing the test frequency according to the measurement temperature of the test specimen. In structural composite materials, the impact of a 5°C temperature change is greater than a change in frequency by a factor of two, making the benefits of strict test temperature control significantly higher than moderate frequency variations. 【Features】 ■ User-defined temperature range (controllable up to ±0.5°C) ■ User-defined frequency range ■ Thermocouple data input via USB is possible ■ Analog input of 0-10V for thermocouple data, including infrared thermometers, is possible ■ Thermocouples can be installed according to the shape of the test specimen *For more details, please refer to the PDF document or feel free to contact us.

• Software (middle, driver, security, etc.)
• Other embedded systems (software and hardware)

E20000 has been newly added! Dynamic fatigue testing machine that adopts linear motor technology, eliminating the need for operating oil, energy-saving, and low noise.

"ElectroPuls" is an electric fatigue testing machine that utilizes linear motor technology (patented) based on approximately 13 years of testing experience. It features a wide performance range capable of conducting static tests as well as dynamic and fatigue tests, making it an ideal system for various laboratories and testing facilities. It can also be used for testing biomaterials and medical devices. In addition to a variety of testing accessories, the new "E20000" can perform both dynamic and static tests with a single unit. We offer a lineup of single-axis models up to 10kN and 100Nm, as well as linear/torsion (dual-axis) options. There are three sizes available, allowing you to choose according to your application. Our product meets your testing needs in a simpler, smarter, and safer way. 【Features】 ■ No hydraulic oil required ■ Energy-efficient ■ Low noise ■ Space-saving ■ No complex and costly maintenance required 【Software Used】 WaveMatrix2 *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

Simultaneous testing of up to 16 specimens is possible! Easy access for specimen insertion, preloading, and adjustment.

The "ElectroPuls 16 Station" is a testing system that significantly shortens testing time and contributes to the rapid market introduction of products. It allows simultaneous testing of tensile, compression, and bending tests with up to 16 specimens. Finished products or individual components, such as NiTi single diamond struts, can be uniformly tested at each station due to easy setup and simple preload adjustments. 【Features】 - The use of inline button-type load cells allows for precise adjustment of specimens close to the testing fixture. - There are no alignment errors in the XY axis during adjustments or preload at each station. - Each individual push rod can be adjusted by ±5mm for easy insertion and adjustment of specimens. - Anyone can accurately apply uniform preload across all 16 stations. - No specialized knowledge is required. *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic linear load capacity ±10kN / dynamic torque capacity ±100Nm! The required floor space for the frame is less than 0.8m².

The E10000 is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring linear-torsion type technology. It is equipped with advanced digital control electronics from Instron, a Dynacell load cell for biaxial testing, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. **Features** - Oil-free linear motor technology that maintains a clean state - Separate linear/rotary actuators - Designed for dynamic and static testing of diverse materials and components - High dynamic performance, capable of operating at up to 100Hz - Operates on single-phase main power, no hydraulic or pneumatic sources required *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic linear load capacity ±3000N / static load capacity ±2100N! The required desk space for the frame is less than 0.3, making it compact.

The "ElectroPuls E3000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It operates on single-phase power and does not require additional utilities (such as compressed air, hydraulic power, or cooling water supply) for basic machine operation. Equipped with advanced digital control electronics, DynacellT load cells, console software, and a new testing technique based on the stiffness of the specimen for hassle-free tuning, it features an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented functions. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Unlockable to allow for rotational freedom of the actuator, providing flexibility in testing ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic linear load capacity ±3000N / dynamic torque capacity ±25Nm! The required desk space for the frame is less than 0.3m².

The E3000 is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring a linear-torsion type design. Equipped with advanced digital control electronics, a Dynacell load cell for two axes, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that allows flexible test configurations, and many other user-oriented features. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. **Features** - Oil-free linear motor technology that maintains a clean state - Separate linear/rotary actuators - Designed for dynamic and static testing of diverse materials and components - High dynamic performance, capable of operating at over 100 Hz - Dynamic linear load capacity: ±3000 N / Dynamic torque capacity: ±25 Nm *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

A variety of hydraulic servo testing systems with different capacities and applications, along with a wide range of applications and fixtures!

This catalog introduces the hydraulic servo fatigue testing systems handled by our company. It features a compact tabletop model "8872 (25 kN)" that meets the high demands of various static and dynamic testing requirements, as well as "8803 (500 kN)" and the controller electronics "8800MT." We also showcase a wealth of applications, so please take a look. 【Featured Products (Excerpt)】 ■ 8872 (25 kN) Fatigue Testing System ■ 8874 (25 kN/100 Nm) Fatigue Testing System ■ 8801 (100 kN) Fatigue Testing System ■ 8862 (100 kN) Low Cycle Fatigue Testing System ■ 8802 (250 kN) Fatigue Testing System *For more details, please refer to the PDF document or feel free to contact us.

• Hydraulic Equipment
• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic load capacity maximum ±10kN / Static load capacity ±7kN! The required floor space for the frame is less than 0.8m², making it compact.

The "ElectroPuls E10000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. Equipped with Instron's advanced digital control electronics, Dynacell load cells, console software, and a new testing technique based on the stiffness of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at up to 100Hz ■ Operates on single-phase main power, no hydraulic or pneumatic sources needed ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic load capacity ±1000N / Static load capacity ±710N! The required desk space for the frame is less than 0.15m².

The "ElectroPuls E1000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It features advanced digital control electronics from Instron, Dynacell load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented functions. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state (patented) ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Dynamic load capacity: ±1000 N / Static load capacity: ±710 N ■ Operates on single-phase main power, no hydraulic or pneumatic sources needed *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 31st Measurement and Measurement Exhibition INTERMEASURE 2024 Official Website: https://intermeasure.org/itms2024/ 【 Dates 】 From __ (Wednesday) to __ (Friday), 202_ 【 Venue 】 Tokyo Big Sight (Tokyo International Conference Center) East Hall (Booth Number: ___) 【 Exhibited Products 】 - Air Leak Tester - Hydrogen Leak Detector - Pin Hole (Reference Test Piece) and more. For more details, please refer to the "Related Materials" (PDF file) below.

[Instructor] Paulstar Communications Inc. Representative Director Koji Kita [Key Lecture Content] Have you ever felt that, despite entrusting work to Generation Z and young employees, they "don't seem to get started," "don't lead to the expected results," or "it's ultimately faster to do it myself"? Behind these situations are various factors, including the recognition gap between supervisors and young employees regarding "entrusting and being entrusted," how to communicate the purpose of the work, the approach, and the scope of discretion, as well as how to follow up after delegating tasks. In this seminar, we will practically explain "how to delegate work" to elicit proactive behavior, taking into account the perspectives and behavioral characteristics of Generation Z and young employees. We will share specific management techniques to help supervisors break free from the burden of work, encourage the autonomy and growth of young employees, and steadily lead to results.

[Speaker] Yoichiro Okuyama, Senior Researcher, Research Department, Hamagin Research Institute, Inc. [Key Lecture Content] In China, the operation of autonomous taxis began in 2021, and now fully unmanned robo-taxis are running in cities like Beijing and Shenzhen. Experiencing a ride reveals the evolution of technology through natural acceleration, smooth steering, and seamless deceleration. Currently, there are several thousand vehicles in operation, but projections suggest that by 2030, this number could exceed one million, accounting for 70% of the global total. What are the underlying factors driving the social implementation of robo-taxis in China? By incorporating local test ride experiences, we will analyze the revenue situation of robo-taxi operating companies and the outlook for market expansion based on data, exploring their future potential. [Lecture Items] 1. Personal experiences of test riding robo-taxis in China 2. Trends in the market size of robo-taxis in China and globally 3. Background of the advancing social implementation of robo-taxis in China 4. Public acceptance and actual usage 5. Performance and challenges of major robo-taxi companies 6. Will robo-taxis become widespread in Japan as well? 7. Q&A / Business card exchange

Daitō Shikō Co., Ltd. will exhibit at the "102nd Tokyo International Gift Show Autumn 2026," which will be held at Tokyo Big Sight from September 2 (Wednesday). At the exhibition venue, we plan to showcase new products including the A7 binder, popular foil-stamped goods, stationery, clear files, and more. If you are looking for SP tools, promotional items, or novelties, please be sure to visit our booth.

Our company will participate in the 1st High-Performance Materials Exhibition (within High-Performance Materials Week) as a member of the MGC Group. We will be showcasing various functional polycarbonate resins that can serve as alternatives to metals and ceramics, so please be sure to visit our booth.