【Catalog for Non-Freon Energy-Saving Control Panel Coolers ENC-GR-eco Series Now Available】Not only does it eliminate the management costs of Freon with non-Freon, but it also significantly reduces electricity costs by up to 55% compared to conventional models!

Energy-saving because it cools only as much as needed with inverter control!

The "ENC-GR-eco series" is an energy-saving, non-Freon control panel cooler that uses an inverter to control a compressor with a built-in DC motor. It does not operate at full capacity until the load rate reaches 100%, which reduces running costs, and because there are fewer temperature fluctuations inside the panel compared to ON/OFF control, it also reduces stress on electronic devices. 【Features】 ■ Up to 55% energy saving compared to conventional models (Eco) ■ All models support high-temperature environments up to 55°C ■ 200-240V free power supply ■ QR code for quick identification of model and manufacturing serial number *For more details, please refer to the PDF document or feel free to contact us.

• Control Panel Cooler

Eliminate maintenance for a long period! You can significantly reduce maintenance costs and man-hours!

The "GR-Pro" is a control panel cooler that not only eliminates the cost of refrigerants with its "non-Freon" design but also features new functions that further reduce the burden on customers. By adopting a finless condenser, there are no clogging points, which eliminates the need for filters and significantly reduces maintenance costs and labor. The risk of failure due to clogging is also minimized. Additionally, it can connect up to 32 units at once, allowing for temperature and error display as well as setting changes. 【Features】 ■ Low maintenance due to no clogging ■ Energy-saving (eco) and powerful cooling ■ High convenience with IoT compatibility ■ Lightweight, slim, and easy to install ■ User-friendly global specifications *For more details, please refer to the PDF materials or feel free to contact us.

• Control Panel Cooler

Contributing to the improvement of line operating rates and the reduction of unexpected repairs for control equipment! A simple explanation in 6 pages of manga.

【Case Study of Proposed Solutions】 ■Traditional Method - Using fan motors for cooling control panels ■Issues - High temperatures inside the control panels during summer cause malfunctions in control devices such as servo amplifiers and inverters - Consequently, the factory line stops ■Ideal Condition - The factory line does not stop due to malfunctions of control devices throughout the year ■Apisute's Proposal - Calculation of heat generation and investigation of current temperatures for each control panel - Installation of appropriate coolers for control panels based on heat generation ■Benefits - Stable temperatures inside control panels year-round, reducing malfunctions of control devices - Additionally, abnormal conditions of the control panel cooler are output externally. In case of emergencies, alerts will notify you *For more details, please refer to the related product catalog or feel free to contact us.

• Control Panel Cooler

Heat is a great enemy for electronic devices! To use them for a long time, it is necessary to keep the temperature low.

Introducing the relationship between the temperature inside the control panel and the lifespan and failure rate of electronic devices. Additionally, we will present the features of the control panel cooler 'ENC Series', which can solve this problem, while comparing it with traditional thermal countermeasures. 【Features】 ■ Internal circulation method that aids in "cooling, dust prevention, and dehumidification" ■ Cooling that is not affected by outside temperature ■ Reliable cooling up to the set temperature ■ Two mounting methods to choose from: side mount / ceiling mount *For more details, please refer to the PDF document or feel free to contact us.

• Control Panel Cooler

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

● What is a hydrogen leak detector? It can measure leaks in small areas that could not be detected in air leak tests and can also identify the leak locations. It is a detector that uses a mixture of 5% hydrogen and 95% nitrogen (non-flammable gas: ISO10156:2017) as the tracer gas. ● What is a helium leak test system? It is a leak test system suitable for high-precision or high-pressure leak inspections. The helium leak test system uses helium gas as the detection gas (tracer gas) and detects the helium that has leaked out. It is the leak test method among Fukuda's leak testers that can detect the smallest leaks.

● What is a flow meter? Flow meters measure flow rates using mass flow meters or laminar flow meters and perform pass/fail judgments based on flow rate criteria. They are ideal for measuring airflow and conducting performance tests. "FMZ-1063 series" This is a flow tester equipped with a mass flow meter. It offers high precision of ± 3.5 % of R.D. ± 1 digit (in the normal flow range). It features a time-saving function (scan measurement). The FMZ-1063 is a compact, all-in-one flow tester with various functions. "FU series" This is a flow measurement unit that integrates laminar and differential pressure sensors, making it smaller and lighter. When connected to a display indicator (model: MI-170), it can provide direct flow readings as well as pressure and flow judgments. "FLF-110 series" This is a laminar flow meter capable of measuring a wide range of flow rates from 2 NmL/min to 500 NL/min.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, there are many instances where sheet boards are used for temporary roads, access routes, heavy machinery work yards, and material storage areas. Traditionally, steel plates have been the mainstream choice, but due to their weight, they require considerable effort for transportation, installation, and removal, which can affect work efficiency depending on site conditions. Hyper CLT sheet boards are civil engineering materials made from CLT, which is wood. While being a sheet board that utilizes wood, it can serve as an alternative to steel plates for measures against muddy conditions, ground protection, and ensuring work pathways. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to handle even with small machinery, contributing to reduced handling and construction burdens on site. Additionally, the unique properties of wood help in reducing glare, lowering noise, and fixing CO2, leading to environmentally friendly proposals. By leveraging the characteristics of wood instead of steel, it also aids in improving the working environment during summer and addressing noise issues in surrounding areas. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," it is an easily applicable alternative material for public works that encourages creativity and safety measures. It is recommended for companies considering wood, sheet boards, timber, civil engineering applications, and civil engineering CLT. We also accept requests for materials tailored to site conditions and consultations for implementation. Proposals can be made for both public and private construction projects.