(Free) Instron WEB Seminar Series: Static Testing Machine Series: Universal Material Testing Machines and Testing Methods for Medical Devices

Achieves high safety without compromising testing capacity! Supports various tensile, compression, and bending tests from low capacity (500N) to high capacity (300kN).

The "6800 Series" is a universal material testing machine designed to enhance safety levels more than ever before, protecting operators, testing machines, and test specimens without placing a burden on testing processing capabilities. The lineup has been further enriched with the addition of high-capacity (100kN, 300kN) floor-mounted models! 【Enhanced Safety Features】 ■ Operator Protection ■ Test Status Display via Indicator ■ Smart Close Air Circuit 【Advanced Testing Functions】 ■ Synchronized Data Sampling at Speeds up to 5kHz ■ Latest Handset ■ Latest Features Linked with Dedicated Software Bluehill Universal 【Customizability】 ■ Wide Range of Accessories ■ Custom Frames (Width and Height Extensions) *Please feel free to contact us for more details.

• Testing Equipment and Devices

Introduction of application examples for material testing of surgical products.

Instron is a leading global supplier of mechanical testing systems suitable for tensile, compression, bending, peeling, tearing, friction, torsion, and fatigue tests. Hospital and surgical products are often consumables designed for single use by patients. Catheters, guidewires, venous lines, tubes, and wound closure products such as bandages, sutures, and staples all fall into this category. Mechanical testing of these products is particularly important to ensure that characteristics such as appropriate tensile strength, low friction force, and sufficient elongation are suitable for their intended use. 【Features】 ■ Reliability ■ Expertise ■ FDA Compliance ■ Space-saving Design *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Strength Testing Equipment

We provide a fixture package to test all ten items of ISO11040-4!

Pre-filled syringes are generally tested based on ISO 11040-4. Glass syringes are more susceptible to breakage than plastic syringes, so a wider variety of tests are required based on ISO 11040-4. There are a total of ten annexes within ISO 11040-4, each requiring different testing methods. Some of the annexes require rotational motion, so the "ISO 11040-4 fixture" is designed to be compatible with simple tensile, compression, and Torsion Add-On systems. [Strengths of Instron Testing Machines (Partial)] ■ The fixtures are designed to perform various tests with minimal fixtures. ■ The fixtures adopt a modular design to minimize the number of necessary parts. ■ Instron's service department supports the introduction of testing machines. ■ Reduces operator training time. *For more details, please refer to the PDF document or feel free to contact us.

• Inspection fixture
• Processing Jig
• Assembly Jig

Providing traceability for inconsistent data! Compatible with new systems and existing systems.

We would like to introduce the traceability feature of our software, "Bluehill Universal." This feature allows users to meet the audit requirements related to FDA 21 CFR Part 11, ISO 17025, Nadcap, A2LA, and other relevant accreditation texts. By incorporating electronic signatures and approvals, file revision history, and automated secure audit trails, this powerful additional feature provides traceability for non-conforming data. [Traceability Features] - Bluehill Security - Revision History - Electronic Signatures - Audit Trails *For more details, please refer to the PDF document or feel free to contact us.

• Software (middle, driver, security, etc.)
• Other embedded systems (software and hardware)

Introducing application examples of material testing for parts and components of medical products, as well as final products.

Instron is a leading global supplier of mechanical testing systems suitable for tensile, compression, bending, peeling, tearing, friction, torsion, and fatigue tests. In many cases, mechanical testing of pharmaceutical products consists of tests for pill crushing, hard and flexible package testing, syringes, autoinjectors, and vials, as well as testing of drug delivery systems such as inhalers and transdermal patches. Mechanical testing of these products is particularly important to ensure characteristics such as appropriate dosage, drug delivery time, package integrity, and safety requirements of the package, such as child-proof opening mechanisms. 【Features】 ■ Reliability ■ Expertise ■ FDA Compliance ■ Space-saving Design *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices
• Strength Testing Equipment

It is a testing machine with a space-saving design that allows for the simulation of the twisting characteristics of products in real-use environments, thereby reducing the time required for product development.

The latest Torsion Add-On 3.0 is designed to enhance laboratory capabilities by allowing simple axial and torsion testing in one unit for the desktop models of the 6800 series and 5900 series. It expands product development capabilities and can simulate applications under actual use conditions. Many international testing standards, such as ISO11040-4, ISO80369, and ASTM F543, require control in both axial and torsional directions, making it possible to consolidate the necessary functions into one unit and streamline the testing process. It is ideal for testing the performance of various consumer products, packaged products, medical products, electronics, and automotive parts. ◆ Features Simulates the product's actual use environment Enhances product development speed Saves laboratory space

• Testing Equipment and Devices

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

Yazaki Energy System will be exhibiting at the "14th Agricultural WEEK (commonly known as J-AGRI)" held at Makuhari Messe. In response to challenges surrounding agriculture, such as record heat and soaring energy prices, our company proposes an agricultural system that utilizes surplus solar heat and waste heat from factories during the summer to support stable cultivation throughout the year, from winter heating to summer cooling. ■ Exhibition Details (Booth Number: 25-47) <Closed-type Agricultural House> Results from the second season and initiatives for the third season <Localized Cooling in Solar-Powered Agricultural Houses> Mechanism of substrate cooling, comparison of energy consumption with spatial cooling, growth conditions this summer <Cooling and Heating with Solar Heat> Examples of crown heating and house cooling, utilization of surplus heat in summer <Cooling of Crops and Workers with Well Water> Exhibition of a prototype well water cooler and proposals for the use of cooling jackets When you visit, please be sure to stop by our booth.

We would like to inform you about the autumn and winter internship opportunities for the 2028 graduates. 1. Open Company Dates: October 23, 2026 (Friday), November 11, 2026 (Wednesday), December 10, 2026 (Thursday), January 21, 2027 (Thursday) Time: 13:30 - 15:30 Location: Online (Microsoft Teams) 2. 1-Day Job Experience Dates: November 17, 2026 (Tuesday), December 16, 2026 (Wednesday) January 15, 2027 (Friday), January 27, 2027 (Wednesday), February 4, 2027 (Thursday), February 10, 2027 (Wednesday), February 18, 2027 (Thursday) Time: 10:00 - 17:30 (tentative) Location: Takaya Corporation Headquarters (661-1 Ibara-cho, Ibara City, Okayama Prefecture)

Notice of participation in the "FOOD Expo 2026." 【Date and Time】 　November 11 (Wednesday) - 13 (Friday), 2026 　Opening hours: 10:00 AM - 5:00 PM 【Venue】 　Tokyo Big Sight 　East Hall 2, Booth Number B-36 【Exhibits】 　Cardboard insulated boxes 　Craft cooler cubes 　Vacuum insulated panel 　Pallet cubes

[Lecture Topics] 1. Co-creation Strategy to Deliver AI to the Field - Business Development and Joint Ventures in the Era of Generative AI and Physical AI Mr. Haruto Suzuki, Industrial and Regional Research Department, Development Bank of Japan 1. The Mechanism of Generative AI and Its Current Utilization by Companies 2. Expansion of the Generative AI Market and AI Infrastructure 3. Transition from Generative AI to Physical AI 4. Bottlenecks in Social Implementation and Solutions through Joint Ventures 5. Formation of an Implementation Ecosystem through Policy and Finance 6. Q&A / Business Card Exchange 2. Needs, Development Trends, Future Possibilities, and Challenges of Physical AI Mr. Kazushi Asama, Senior Researcher, Next-Generation Robot Research Organization, Waseda University / Emeritus Professor, University of Tokyo 1. What Physical AI Means 2. Needs for Physical AI and the Technological Trends of Generative AI Behind It 3. Development Trends of Physical AI 4. Future Possibilities and Challenges of Physical AI 5. Q&A / Business Card Exchange