[Examples of Exhaust Odor Control] Inside the Facility

A case where we received an evaluation that the deodorization effect indicates a high suitability of the exhaust gas and deodorizing agent! *Deodorizing liquid samples available.

We would like to introduce a case study on the deodorizing effect test of our deodorant (Yume Shota SH200) as a measure against exhaust odors within the facility. Currently, a scrubber-type deodorization system has been installed, but it was reported that satisfactory odor control measures have not been implemented. We received a request for a deodorization demonstration test from a company that is diligently working on odor control. Therefore, we first extended the exhaust from the existing scrubber-type deodorization system using an aluminum flexible duct, and installed a deodorizing spray box (demo unit) at the end of the duct. As a result, we received an evaluation indicating that the deodorization effect observed through odor measurement results and the sensory experience of the deodorant spray showed a high compatibility between the exhaust gas and the deodorant (Yume Shota SH200). Consequently, we received a request for a quotation for the Nioix deodorization system, as they wanted to include it in their budget. *For more details, please refer to the PDF document or feel free to contact us. *We are conducting free demonstrations. If you would like to experience the effect firsthand, please feel free to reach out to us. *We are offering free samples of the deodorizing liquid. If you are interested, please request it using the contact button below.

• Air purifiers

In areas such as construction sites and mountainous regions after rain, the ground can become muddy, causing vehicle and heavy machinery tires to sink. If the tracks become deep, it can lead to decreased work efficiency and changes in the flow of movement on site. Hyper CLT mats are lightweight wooden mats that utilize CLT. By laying them down on temporary roads, access routes, heavy machinery work yards, and material storage areas, they can reduce the area where vehicles make direct contact with the ground, serving as a measure to mitigate the disturbance of weak ground. The 5×10 mats weigh approximately 230 kg, making them relatively lightweight, and depending on site conditions, they can be easily installed, removed, or relocated using small machinery. It is also possible to consider replacing them in necessary locations according to the progress of construction and the condition of the ground. However, wooden mats alone do not completely reinforce the ground. It is important to check the ground's bearing capacity, settlement, slope, drainage, and vehicle weight, and to use them in combination with crushed stone, ground improvement, and fixing methods. Hyper CLT mats are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology "TH-250021-A." With wooden mats, NETIS, civil engineering, CLT, and lightweight wooden mats as new options, stable work pathways can be created on sites with weak ground.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*