【Amazing Dehumidification Ability!】Instant dry air supply possible with just the cooler! The "PAU-AZ2000SE-DR" can be used as a drive booth or dry air supply unit.

Incredible dehumidification performance! A specialized precision air conditioning unit that can dehumidify air at 27°C and 70% humidity down to 23°C and 30% humidity in a single pass. It can also achieve a dew point of 4.5°C.

Significant reduction in introduction and operating costs! With "local air conditioning" that only conditions limited spaces, energy-saving and highly precise management of temperature, humidity, and cleanliness is possible. 【Features】 ■ Temperature control accuracy: ±0.1℃ ■ Humidity control accuracy: ±0.5% RH ■ Dehumidification of absolute moisture content by ▲65%! Rapid dehumidification of humid air at 27℃ and 70% to 23℃ and 30% in a single pass! Traditionally, it was considered difficult to dehumidify absolute moisture content by ▲65% using only a refrigeration cycle. The "PAU-AZ2000SE-DR" adopts Apiste's unique "MAX-DRY operation method," enabling rapid dehumidification of humid air in a single pass. 【Application Examples】 - As a dry air conditioning unit when using hygroscopic materials! - For drive booths in processes using organic solvents or powders! - As a dry air supply unit for the OA intake of air conditioning equipment! *For more details, please refer to the PDF document or feel free to contact us.

• air conditioning

Leave humidification and dehumidification to us! We will create the desired temperature and humidity environment with high precision of ±0.1℃ for temperature control and ±1.0% for humidity control.

Significant reduction in installation and operating costs! By using "local air conditioning" that only conditions limited spaces, it enables energy-saving and high-precision management of temperature, humidity, and cleanliness. 【Features】 ■ Temperature control accuracy: ±0.1℃ ■ Humidity control accuracy: ±1.0% RH ■ Minimal costs due to local air conditioning! Precision air conditioning units are in a local air conditioning format that divides spaces. Since only the areas where temperature and humidity management is needed are controlled, large-scale equipment is unnecessary. It can be installed at a lower cost compared to whole-building air conditioning. ■ No management costs for refrigerants since non-fluorocarbon refrigerants are used! With an extremely low Global Warming Potential (GWP), it is exempt from the Fluorocarbon Emission Control Law, eliminating costs for refrigerant recovery or destruction upon disposal, and there are no obligations for regular inspections of precision air conditioning units during use. ■ Up to 88% energy savings (eco) with completely heater-less and inverter control compared to our conventional models. *For more details, please refer to the PDF document or feel free to contact us.

• Temperature and Humidity Control

[Free Distribution - 48 Pages] A comprehensive explanation of the overview and principles of industrial air conditioning, as well as how to interpret the figures used for performance comparisons. For those in charge of considering the introduction of industrial air conditioning equipment.

This document is a comprehensive guide that can be useful when considering the introduction of industrial air conditioning equipment or product development, particularly when questions arise about "cooling" and "heating." It consolidates knowledge related to industrial air conditioning and the processes of cooling and heating. In addition to explanations of related themes such as the properties of air, refrigerants, and air diagrams, it also includes a glossary of terms. It features temperature and humidity conditions specific to different production processes, examples of trouble avoidance in production lines through the use of industrial air conditioning, and cases of improved QCD in semiconductor manufacturing processes. This material is not only suitable as educational material for younger individuals but is also packed with fundamental knowledge that experienced professionals should know about the utilization of industrial air conditioning. [Contents] ■ Overview and principles of air conditioning ■ Properties of air ■ Refrigerants ■ Refrigeration cycle of air conditioning units ■ Air diagrams ■ Airflow capacity and pressure loss ■ Appendix (case studies, glossary) *The document can be viewed immediately via "PDF Download."

• air conditioning

Localized air conditioning manages temperature and humidity only where needed! The trend is shifting from whole-building air conditioning to localized air conditioning.

Static electricity causes various issues such as poor printing quality and equipment troubles. It occurs under several overlapping conditions, with "humidity" being the most important factor among them. In a factory that manufactures precision parts, there was a customer who experienced a high number of defects due to foreign substances adhering to coiled metal before pressing, caused by static electricity. Apiste proposed a localized air conditioning system to stabilize the temperature and humidity in the production area, creating an environment where static electricity is less likely to occur. 【Solution Proposal Example】 ■ Conventional Method - Use of general air conditioning ■ Issues - Static electricity occurs in winter, causing foreign substances to adhere to the workpiece. - If the workpiece enters the press with foreign substances attached, it results in defective products. ■ Ideal State - Suppression of static electricity generation, preventing foreign substances from adhering. ■ Apiste's Proposal - Installation of the precision air conditioning unit PAU series along with booths and fan filter units to implement localized air conditioning. ■ Benefits - Control of humidity to suppress static electricity generation. - Stabilizing temperature and humidity only in the necessary areas minimizes initial costs. - Additionally, measures to prevent the intrusion of foreign substances are also realized.

• air conditioning

We handle TFT LCD modules from WINSTAR for use in display sections of devices. 【We receive inquiries in the following situations】 - Wanting to update the display section of measuring instruments or control panels - Looking for LCDs to incorporate into industrial equipment - Searching for a supplier that can accommodate small quantities 【We can assist with】 - Selecting sizes and interfaces that meet application and enclosure conditions - Confirming pin assignments and arranging samples - Developing custom products and embedded systems - Selling in small lots We also handle OLED (organic EL) modules from the same WINSTAR company. Please consider these as well for devices that want to take advantage of their thinness, low power consumption, and wide viewing angles. Please check the specific specifications in the manufacturer's datasheet. We also accept requests for quotes only.

CLT is known as a building material, but its applications are not limited to just buildings. The wooden lightweight mat "Hyper CLT Mat" is a new option for utilizing CLT in civil engineering. It can be used as a wooden mat in places where steel plates have been the norm, such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 mat is relatively light at about 230 kg, making it easy to install, remove, and relocate. Additionally, it offers different values compared to steel, such as reducing glare and metallic noise, as well as CO2 fixation through wood. Moreover, the Hyper CLT Mat is registered with the Ministry of Land, Infrastructure, Transport and Tourism as a NETIS technology "TH-250021-A." It can also be utilized for proposals involving the use of new technologies and environmental considerations in public works. From construction to civil engineering, the new use of wood is expanding in the form of wooden lightweight mats.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

We have newly added a **"Frequently Asked Questions Q&A"** section to the Hyper CLT sheet website. It clearly summarizes many questions frequently asked by those considering the introduction of the product, such as "What types of civil engineering sites can it be used on?", "Can it be used on rainy days?", "Is it compatible with large machinery?", and "What is NETIS?". The Hyper CLT sheet is a lightweight wooden sheet utilizing wood CLT, suitable for a wide range of applications including temporary roads, access routes, and heavy machinery work yards. It is also registered as a **Ministry of Land, Infrastructure, Transport and Tourism NETIS registered technology "TH-250021-A"**. Since it is a new material, we will not leave any uncertainties unaddressed. We aim to create a website that makes it easy to resolve questions before introduction, including information on wood, NETIS, civil engineering, and CLT, and we will continue to enhance the Q&A section.

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.