Oji Fitec and Oji Tack jointly exhibited at 'JAPAN PACK 2022'.

New varieties of gold and silver film, paper, and thermal labels! This is a product series with a metallic luster that can be used in microwave cooking and on lines equipped with metal detectors.

◇◆Features◆◇ - Since it reproduces metallic luster without using aluminum vapor deposition film, it has the design qualities of gold and silver while being able to be heated in a microwave without causing sparks, allowing for microwave cooking while still attached to packaging materials or containers. (*1) - It is not detected as a metal object by metal detectors, allowing for inspection while still attached to packaging materials or containers. (*2) (*1) Confirmed with a commercial microwave oven at 1500W (15-60 seconds) (*2) Confirmed under standard conditions in general industrial lines ■ Film Type Suitable for containers that require heating, such as chilled foods, beverages, and pharmaceutical products, as well as for container labels, product POPs, and advertising labels that utilize metal detectors. ■ Paper Type (Environmentally Friendly Product) Maintaining the applicability of metallic luster film tack, it has a glamorous appearance with metallic luster while using environmentally friendly paper as the surface substrate. ■ Film Thermal Type Added thermal printing functionality to metallic luster film tack. It has good print readability for barcodes and QR codes, allowing for the coexistence of POP labels and weighing labels on a single sheet. It also contributes to enhancing the premium feel of weighing labels. *For more details, please download the PDF or contact us.

• label
• Special labels, etc.
• Label printing

A recyclable paper band that can be collected with old paper along with cardboard boxes! It is a product that takes the Earth's environment into consideration.

Recyclable Paper Strapping for Binding <Features> ◆ High-strength paper strapping ◆ Environmentally friendly product that can be collected and recycled ◆ Made of paper, easy to tear by hand, making unpacking simple and safe

• Paper and pulp products

Paper packaging material that does not require a sealant.

It is a paper packaging material specialized for easy heat sealing without the need for a sealant. It is ideal for secondary food packaging, shipping packaging, and industrial material packaging.

• Paper and pulp

Paper barrier material that allows visibility of the contents.

This is a paper packaging material that incorporates a function to make the contents visible, in addition to barrier properties and heat sealability. It is ideal for packaging food and daily necessities that you want to showcase. (Patent No. 6930649)

• Paper and pulp

Paper-based barrier material as a substitute for aluminum vapor-deposited film.

Aluminum vapor deposition was performed on the paper, imparting oxygen barrier properties, moisture resistance, light shielding, and heat sealability. It is ideal for applications that require high barrier and concealment properties.

• Paper and pulp

It is a paper-based barrier material that replaces plastic film.

Amidst significant challenges such as plastic waste and global warming, paper-based barrier materials are expected to contribute to reducing plastic in the packaging sector in the future. They have the functionality to minimize the leakage of oxygen, water vapor, and aromas, so please take a look. For more details, please download the catalog or feel free to contact us.

• Paper and pulp

ALL paper cushioning BOX! It is suitable for thick product packaging for online shopping. It contributes to reducing re-deliveries and simplifying packaging work to eliminate plastic.

The ALL-paper cushioning case "Paper Net BOX" is here. Since the cushioning material is also made of paper, it contributes to reducing plastic use. When a product is placed inside, the cushion paper unfolds like a hammock, gently wrapping around the product. The box can be printed with original designs. Features: ◆ No hassle of separating waste Since it is made entirely of paper, there is no need for sorting, and it is recyclable. ◆ No need for additional cushioning materials to fill gaps in the box When a product is placed inside the net-like cushion paper (paper net), the paper net expands to protect the product. ◆ Easy to package and cushion irregularly shaped products The internal paper net can be detached to wrap the product before inserting it into the box. ◆ Suitable for shipping thicker products ◆ Size fits into a home mailbox.

• Paper and pulp products

Film tack that improves the recycling efficiency of PET and glass!

◆The adhesive performance on glass bottles and PET bottles is excellent. ◆Labels can be cleanly separated and removed without residue in a short time using warm water washing and alkaline cleaning. ◆Even when sorting labels at general households before they are sent for container collection, they can be easily and cleanly peeled off by hand from glass bottles and PET bottles. ◆In the PET bottle collection and recycling process, it has the performance that meets the mechanical peeling and separation suitability standards of the PET bottle self-design guidelines (PET Bottle Recycling Promotion Council).

• Paper and pulp products

Using recycled PET film as the base material and a biomass-based adhesive! Product certified with the PET bottle recycling recommendation mark.

"R&B Film Tack" is a film made using recycled PET materials collected from used PET bottles, or partially using them. It is available in three types: "transparent," "white," and "aluminum vapor-deposited," with recycled PET material usage rates of over 80% and over 25% (film thickness 50µm), and 100% (film thickness 38μm), totaling six varieties. The adhesive is a biomass-based adhesive made partially from plant-derived materials. By replacing non-recycled material and films without biomass with "R&B Film Tack," a reduction in carbon dioxide emissions is expected. 【Features】 ■ Environmentally friendly product made partially from plant-derived materials ■ Maintains performance equivalent to conventional PET film tack products ■ Expected reduction in carbon dioxide emissions ■ Product featured in the "Plastic Smart" campaign initiative *For more details, please download the PDF or contact us.

• Sealing machine
• Adhesive tape

It is a product that has high water resistance, allows for offset and laser printing, and excels in writing characteristics.

"OK Rain Guard" is a water-resistant printing paper developed to be used in wet environments, based on high-quality paper. It demonstrates its effectiveness in outdoor work and situations where it may get wet from rain. Therefore, it is used for envelopes, golf scorecards, disaster maps, and more. <Features> - It has top-level water resistance. - With high whiteness, it provides excellent printing results for both offset and laser printing. - Made from 100% natural pulp without the use of films or other materials, it is an environmentally friendly product.

• Paper and pulp

Proposal for reducing plastic! This is a label tack made from biodegradable biomass plastic. We offer both white and transparent types.

This is an environmentally friendly label tack from Oji Tack made from materials that are easy to decompose naturally (such as biodegradable materials). Biomass raw materials were used to reduce carbon dioxide emissions during incineration. Original decomposition tests are currently being conducted (in seawater and soil). <Features> ◆ The surface material uses biomass plastic that is easy to decompose naturally. ◆ A special adhesive that does not easily inhibit the decomposition of the surface material is used. ◆ Printing suitability equivalent to PET labels and OPP labels. ◆ Superior water resistance compared to conventional paper tacks. ◆ Registered as a Plastic Smart product by the Ministry of the Environment. *For more details, please download the PDF or contact us.

• Sealing machine
• Paper and pulp products
• Adhesive tape

No more plastic needed! Perfect for online shopping! A "paper cushioning envelope" that spreads out like a net and gently wraps and protects products like a hammock.

This is an ALL-paper "Paper Net Envelope" that responds to the global trend of reducing plastic. The cardboard boxes used for online shopping are bulky and do not fit in mailboxes, which is a problem. Thick paper envelopes made of coated board can fit in mailboxes, but thicker ones are difficult to insert and lack cushioning, limiting their use mainly to documents. On the other hand, envelopes lined with bubble cushioning material that has an air layer with bumps provide good cushioning, but the issue is the effort required for sorting during disposal. Therefore, by expanding a mesh-like paper sheet inside the envelope, we discovered that it is possible to achieve both cushioning and strength with an ALL-paper product, thanks to the softness of the paper and the strength of its structure. 【Features】 - No need for sorting during disposal - Easy disposal and recyclability - Achieves both cushioning and strength even with ALL-paper materials For more details, please download the PDF or contact us.

• Other packaging materials
• Packaging materials
• Food boxes, packaging materials, and cushioning materials

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

Announcement of participation in the "12th Robot and Aerospace Festival Fukushima 2026 / 5th Drone Summit." 【Date and Time】 　November 27, 2026 (Wednesday) 10:00 AM - 5:00 PM Business Exhibition 　November 28, 2026 (Thursday) 10:00 AM - 4:00 PM General Exhibition 【Venue】 　Big Palette Fukushima (52 Minami 2-chome, Koriyama City, Fukushima Prefecture) 【Exhibits】 　Cardboard Insulated Box 　Craft Cooler Cube