Reaction rate measurement is possible with existing spectrometers! Stop-flow measurement accessory RX2000 with a dead time of 8 milliseconds.

～RX2000～ Enables stop-flow measurements in combination with existing spectrophotometers!

The RX2000 from Applied Photophysics is a high-performance stopped-flow measurement accessory. By combining it with existing UV-Vis spectrophotometers, fluorometers, and circular dichroism dispersers, it enables the measurement of reactions that are over 1000 times faster compared to manual operations. With a dead time of just 8 milliseconds, the RX2000 can accommodate primary reaction rates exceeding 200 s^-1. ■ Adds stopped-flow measurement functionality to existing UV-Vis spectrophotometers and fluorometers ■ Sample temperature control mechanism with a digital temperature display ■ Capable of measuring reaction rates exceeding 200 s^-1 with an excellent dead time of 8 milliseconds ■ Stable measurements possible with gas pressure-driven accessories (optional) *For more details, please download the PDF or feel free to contact us.

• Other physicochemical equipment

A stopped-flow device optimal for steady-state and reaction kinetics studies!

The SX20 stop-flow device from Applied Photophysics is used to study the transient steady states of fast liquid-phase chemical and biochemical reactions initiated by the rapid mixing and stopping (stop-flow) of reactants. Spectroscopic probes such as absorbance and fluorescence are employed to observe the progress of the reaction by recording changes in the intensity of the spectral signal as a function of time. The general upper limit of reaction rates that can be measured using stop-flow spectroscopy is approximately 2000 s⁻¹. However, by utilizing the small volume cells adopted by the SX20, it becomes possible to measure reaction rates exceeding 3000 s⁻¹. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

Beyond α-helices and β-sheets! Detecting structural and thermodynamic properties!

The Chirascan circular dichroism spectrometer from Applied Photophysics is suitable for the study of all types and sizes of chiral molecules and has been featured in thousands of publications since its launch in 2005. Chirascan data, commonly used for the analysis of biomolecules, helps deepen the understanding of the properties, mechanisms, and interactions of biomolecules. ■ Detect changes in secondary and tertiary structures ■ Detect responses to thermal or chemical changes ■ Study the mechanisms of folding and unfolding ■ Expand functionality with accessories for Chirascan *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

Next-generation circular dichroism dispersive spectrometer for applications requiring higher sensitivity and precision!

The Chirascan V100 from Applied Photophysics is a circular dichroism spectrometer that can improve productivity and detection sensitivity for all CD applications. It is ideal for applications where samples and time are extremely valuable, such as in biopharmaceutical research or development departments. ■ High-sensitivity detector ■ Maximizes information from minimal samples ■ Dramatically reduces measurement time for sufficient CD application data acquisition ■ Simultaneous measurement of CD, absorbance, and fluorescence data ■ Absolute CD acquisition across the entire wavelength range through multi-point calibration ■ Opens the door to structural analysis of existing and unknown proteins *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

The optimal solution for CD measurement in the biopharmaceutical industry!

The Chirascan Q100, manufactured by Applied Photophysics, is the world's first and only ultra-sensitive, high-speed automatic CD spectrometer. This unique device significantly expands the range and scope of CD applications, increasing productivity by up to 50 times. Utilizing multidimensional load experiments, the Chirascan Q100 is a powerful new tool in protein formulation screening and biological identification research. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall