For the study of high-speed reaction kinetics! Stop-flow device SX20 [500 microseconds]

A stopped-flow device optimal for steady-state and reaction kinetics studies!

The SX20 stop-flow device from Applied Photophysics is used to study the transient steady states of fast liquid-phase chemical and biochemical reactions initiated by the rapid mixing and stopping (stop-flow) of reactants. Spectroscopic probes such as absorbance and fluorescence are employed to observe the progress of the reaction by recording changes in the intensity of the spectral signal as a function of time. The general upper limit of reaction rates that can be measured using stop-flow spectroscopy is approximately 2000 s⁻¹. However, by utilizing the small volume cells adopted by the SX20, it becomes possible to measure reaction rates exceeding 3000 s⁻¹. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

～RX2000～ Enables stop-flow measurements in combination with existing spectrophotometers!

The RX2000 from Applied Photophysics is a high-performance stopped-flow measurement accessory. By combining it with existing UV-Vis spectrophotometers, fluorometers, and circular dichroism dispersers, it enables the measurement of reactions that are over 1000 times faster compared to manual operations. With a dead time of just 8 milliseconds, the RX2000 can accommodate primary reaction rates exceeding 200 s^-1. ■ Adds stopped-flow measurement functionality to existing UV-Vis spectrophotometers and fluorometers ■ Sample temperature control mechanism with a digital temperature display ■ Capable of measuring reaction rates exceeding 200 s^-1 with an excellent dead time of 8 milliseconds ■ Stable measurements possible with gas pressure-driven accessories (optional) *For more details, please download the PDF or feel free to contact us.

• Other physicochemical equipment

Beyond α-helices and β-sheets! Detecting structural and thermodynamic properties!

The Chirascan circular dichroism spectrometer from Applied Photophysics is suitable for the study of all types and sizes of chiral molecules and has been featured in thousands of publications since its launch in 2005. Chirascan data, commonly used for the analysis of biomolecules, helps deepen the understanding of the properties, mechanisms, and interactions of biomolecules. ■ Detect changes in secondary and tertiary structures ■ Detect responses to thermal or chemical changes ■ Study the mechanisms of folding and unfolding ■ Expand functionality with accessories for Chirascan *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

Next-generation circular dichroism dispersive spectrometer for applications requiring higher sensitivity and precision!

The Chirascan V100 from Applied Photophysics is a circular dichroism spectrometer that can improve productivity and detection sensitivity for all CD applications. It is ideal for applications where samples and time are extremely valuable, such as in biopharmaceutical research or development departments. ■ High-sensitivity detector ■ Maximizes information from minimal samples ■ Dramatically reduces measurement time for sufficient CD application data acquisition ■ Simultaneous measurement of CD, absorbance, and fluorescence data ■ Absolute CD acquisition across the entire wavelength range through multi-point calibration ■ Opens the door to structural analysis of existing and unknown proteins *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

The optimal solution for CD measurement in the biopharmaceutical industry!

The Chirascan Q100, manufactured by Applied Photophysics, is the world's first and only ultra-sensitive, high-speed automatic CD spectrometer. This unique device significantly expands the range and scope of CD applications, increasing productivity by up to 50 times. Utilizing multidimensional load experiments, the Chirascan Q100 is a powerful new tool in protein formulation screening and biological identification research. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.