[ept Company] Connector 'PC/104, PC/104-Plus'

Accessories are shrouded! Press-fit, custom-compatible board-to-board connector.

The "PC/104, PC/104-Plus" is a board-to-board connector from the German company ept, highly regarded in Europe, particularly in the automotive and industrial equipment sectors. It features press-fit technology and can be customized. The maximum mating cycles are 50 or 250. It is used in single-board computing and other circuit boards. 【Features】 ■ Press-fit ■ Customizable ■ Accessory: Shroud ■ Maximum mating cycles: 50 or 250 * For more details, please refer to the PDF document or feel free to contact us. * If you would like a sample, please do not hesitate to consult with us.

• Board to Board Connectors

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

The 【 HDA-0100 series 】 currently available from Fukuda Corporation is a "Portable Hydrogen Leak Detector." ■ Compact and lightweight, convenient for carrying (approximately 400 g, including battery) ■ Battery-operated and cordless (continuous usage time of approximately 8 hours) ■ High sensitivity and wide range (0.5 ppm to 5000 ppm) hydrogen measurement is possible in a handy type It has features such as these. "What is a Hydrogen Leak Detector?" It is a tester that can measure leaks in small areas that could not be measured in air leak tests and can also identify leak points. It uses a tracer gas consisting of 5% hydrogen and 95% nitrogen, an industrial mixed gas (non-flammable gas: ISO10156:2017). For more details, please refer to the links below for related links, product information, and catalogs.

The HDZ-0201 is a hydrogen leak detector designed for installation in equipment. It is used to measure the overall leakage from the entire inspected item (workpiece). - The atmospheric pressure chamber method involves covering the workpiece with a chamber, filling the inside of the workpiece with tracer gas, allowing the leaked gas to accumulate in the chamber, stirring the leaked gas, and forcing circulation to measure the gas concentration with a hydrogen detector. - The vacuum chamber method allows for high-sensitivity measurements by evacuating the chamber and then introducing atmospheric air into the chamber, directing the gas to the hydrogen detector. There are two methods available. It features a compact and lightweight design that is easy to integrate into equipment. Additionally, its concentration resolution capability is ultra-high sensitivity up to 0.1 ppm (depending on set conditions and environmental conditions). Detection principle: Semiconductor type Detection sensitivity: Equivalent to 1×10⁻⁶ Pa·m³/s (depending on inspection conditions and measurement environment) Usage: Equipment-integrated type (dedicated for installation in equipment) Resolution: 0.1 ppm Power supply voltage: DC 24 V External dimensions: W 93 × D 91 × H 97 mm

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without the application of heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.