[Free Seminar on 3/18 (Friday), also available via Web] Tube Manufacturer Edition: Selection of Piping Components, Basics ▶ Matching of Tubes and Fittings (Morning Session)

Piping fittings that achieve a balance of heat resistance, chemical resistance, lightweight, strength, and cost-effectiveness.

Antlock is a piping fitting designed to balance heat resistance, strength, chemical resistance, and cost-effectiveness, made from the super engineering plastic "PEEK." This Antlock utilizes the heat and chemical resistance characteristics of PEEK resin while incorporating carbon to further enhance strength. It adopts a simple and proven ferrule-less structure for connecting to tubes, ensuring reliable and speedy work. It is suitable for applications that previously used metal fittings such as stainless steel, providing weight reduction and rust prevention, as well as cost reduction in fields that used fluoropolymer fittings. 【Free sample distribution for the first 1,000 sets】 If you are interested, please contact us promptly using the form below. (Distribution will end once the quantity is reached.) <About the showroom> With the concept of "see," "touch," "compare," and "verify," we display approximately 3,000 items of plastic piping components. The location is within the TFT Building, a 3-minute walk from Tokyo Big Sight. If you are visiting the exhibition, please feel free to stop by. *For access to the venue, please refer to the "Basic Information" section on the page.

• Pipe Fittings

Neatly secure the joint and tube in a space-saving manner.

This is a hose band made of plastic for soft tubes. The design, which tightens the tube's outer circumference evenly, ensures a snug fit between the fitting and the tube without gaps. Additionally, the innovative appearance, which reduces the cross-sectional area of the engagement part by approximately 40% compared to conventional products, allows for simplification and space-saving around the fittings. It is ideal for securing flexible tubes and fittings made of soft PVC, silicone, and various types of rubber. Features: ● Made entirely of flexible and strong nylon ● Uniformly tightens the fitting and tube ● Reduces installation space by approximately 40% (compared to conventional products) <About the Showroom> With the concept of "See," "Touch," "Compare," and "Confirm," we display around 3,000 items of plastic piping components. The location is within the TFT Building, a 3-minute walk from Tokyo Big Sight. If you are visiting the exhibition, please feel free to stop by. *For venue access, please refer to the "Basic Information" section on the page.

• hose

Infinitely adjustable tightening and loosening.

This is a 66 nylon clamp for securing fittings and hoses. It allows for stepless adjustment of "tightening" and "loosening," ensuring that the hose is evenly pressed against the fitting with optimal fastening force. Unlike traditional metal clamps, it does not rust and contributes to the lightweight of the system. Features: ● Made entirely of flexible and strong nylon ● Ensures even contact between the fitting and hose with optimal fastening force ● Utilizes durable 66 nylon <About the Showroom> We have approximately 3,000 items of plastic piping components on display, based on the concept of "seeing," "touching," "comparing," and "confirming." The location is within the TFT Building, a 3-minute walk from Tokyo Big Sight. If you are attending an exhibition, please feel free to stop by. *For venue access, please refer to the "Basic Information" section on the page.

• hose

Lightweight rust-free plastic hose clamp

The EJ hose band is an all-plastic hose band designed to secure tubes and fittings. It is mounted around the outer circumference of the tube inserted into the fitting, and by crimping both ends of the hose band with pliers or similar tools, it tightly and evenly compresses the tube. This prevents twisting of the tube, which can cause leaks, and allows for a uniform and gap-free tightening. It is available in sizes ranging from a minimum of 5.6φ to a maximum of 45φ, with a total of 16 sizes in the lineup. It is ideal for securing flexible tubes and fittings made of soft PVC, silicone, and various types of rubber. *Hose clamp, tube band, tube clamp*

• Pipe Fittings

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 31st Measurement and Measurement Exhibition INTERMEASURE 2024 Official Website: https://intermeasure.org/itms2024/ 【 Dates 】 From __ (Wednesday) to __ (Friday), 202_ 【 Venue 】 Tokyo Big Sight (Tokyo International Conference Center) East Hall (Booth Number: ___) 【 Exhibited Products 】 - Air Leak Tester - Hydrogen Leak Detector - Pin Hole (Reference Test Piece) and more. For more details, please refer to the "Related Materials" (PDF file) below.

Nitto Kohki will exhibit at the "H₂ & FC EXPO Spring International Hydrogen and Fuel Cell Exhibition" held at Tokyo Big Sight, West Exhibition Hall 2, from February 28 (Wednesday) to March 1 (Friday), 2024. [Booth Number: W14-63] The quick fluid coupling "Coupler" is a product that allows for the rapid connection and disconnection of piping for various fluids such as air, water, oil, and chemical solutions. At this exhibition, we will primarily showcase the high-pressure hydrogen filling quick fluid coupling "HHV Coupler."

☆☆☆ Urgent Visit to Japan & Emergency Event Announcement ☆☆☆ Dr. Yuval Levy, CEO of ISCFDC and developer of EPPIC, who has been involved in CFD research at NASA Ames Research Center for about five years, is coming to Japan! He will demonstrate and explain advanced CFD technologies, application cases, and the latest features of EPPIC himself. □ Date and Time □ July 31, 2026 (Friday) 13:00-18:00 (Registration starts at 12:30) <Part 1: Post-Processor Session> 13:00-16:40 <Part 2: Pre-Processor Session> 16:50-17:50 <Networking Event> 18:10-19:40 □ For more details □ Visit the Hulinks page https://www.hulinks.co.jp/seminar/eppic/

[Viewer Benefits Available] Explaining Tips for LC in a Short Seminar Do you have concerns such as "I'm unsure about column selection," "I'm struggling to optimize analysis conditions," or "I have challenges analyzing compounds with weak retention" in LC analysis? Waters will hold a seminar titled "Must-Listen! Advanced LC Application Seminar" where you can learn practical LC analysis know-how in just 30 minutes. In this seminar, we will cover useful topics in a total of six sessions, including tips for choosing detectors, how to utilize reverse phase columns, scaling up to preparative LC, approaches for analyzing hydrophilic and highly polar compounds, case studies of low-adsorption HPLC, and improving purity through solid-phase extraction. Each session is scheduled to start at 15:00. Event Themes: • October 6 (Tuesday) - Session 1: Tips for Choosing Detectors • October 13 (Tuesday) - Session 2: Tips for Choosing Columns • October 21 (Wednesday) - Session 3: Tips for Preparative LC • October 27 (Tuesday) - Session 4: Approaches for Analyzing Hydrophilic and Highly Polar Compounds • November 5 (Tuesday) - Session 5: Case Studies of Low-Adsorption HPLC • November 10 (Tuesday) - Session 6: Tips for Solid-Phase Extraction

In liquid biopsy research, we will introduce a technical evaluation of proteome analysis to obtain reliable data from trace plasma, as well as case studies on data quality verification using the Contamination Index and Simple Western.