[HOTJEBLO Fujiyama R2 Case] Water damage restoration cleaning under the floors of middle school classrooms and gymnasiums.

Frequent guerrilla rainstorms, typhoons, and linear precipitation zones! Introduction of a new method suitable for restoration and cleaning of flooding under and above floors - NETIS registered 'Hot Jebro Method'

After the heavy rain disaster in 2020, we received an inquiry from the education board of a certain city in Kyushu regarding the restoration and cleaning of the flooded classrooms and gymnasium of a junior high school due to the flooding of the river flowing next to the school. Due to the narrow working space, large equipment could not be brought in, and it required considerable effort to scoop out the accumulated sludge. They were troubled by the difficulty of needing manpower during times of flooding. Therefore, we introduced the "HOTJEBLO Fujiyama R2." The non-splashing high-pressure cleaning and simultaneous suction of wastewater proved to be a suitable method for underfloor cleaning, allowing us to complete the restoration cleaning with less than one-sixth of the manpower required during the previous year's flooding and in less than one-third of the time. [Case Overview] ■ Equipment Introduced: HOTJEBLO Fujiyama R2 and peripheral equipment ■ Issues: - Due to the narrow working space, large equipment could not be brought in. The "HOTJEBLO Fujiyama R2" utilizes high-pressure water injection of up to 20 MPa (approximately 200 kgf/cm²) and automatically generates hot water up to 80°C for cleaning while simultaneously recovering and processing the wastewater. It is a cleaning system that integrates multifunctionality into a single unit of hot water high-pressure cleaning and suction equipment.

• High pressure cleaner

Recovery cleaning from heavy rain disasters, fire scenes, and water leakage damage is possible! A special cleaning machine that can perform 'hot water high-pressure cleaning' and 'wastewater recovery' simultaneously! *Registered with NETIS.

The "Hot Jebro Fujiyama R2" automatically generates high-pressure water injection of up to 20MPa (approximately 200kgf/cm²) and uses hot water at a maximum temperature of 80°C for cleaning, while simultaneously enabling the recovery and treatment of wastewater. It is an integrated cleaning system that combines multifunctionality into a single unit, featuring a hot water high-pressure cleaning and suction device. We invite you to consider this method, which enables speedy and smart construction, achieving overwhelming "shortened construction periods" and "reduced manpower." **Features** - Integrated cleaning machine with "hot water generation," "high-pressure cleaning," and "wastewater suction" - Remarkable cleaning effectiveness - Significant efficiency improvement - Reduces two different tasks into one process - Space-saving, engine-driven design *For more details, please refer to the catalog or feel free to contact us. You can also view before-and-after cleaning videos below!*

• High pressure cleaner

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The wooden lightweight sheet "Hyper CLT Sheet," utilizing CLT (Cross Laminated Timber), is a sponsor of the Masters Koshien (Okayama). The Masters Koshien is where those who have experienced high school baseball come together across generations to pursue their goals once again. We resonate with their "attitude of continuing to challenge" and support their activities from Okayama. The Hyper CLT Sheet is a product created to provide a new option in civil engineering sites, which have primarily relied on steel sheets until now. It is lightweight, easy to handle, and features the environmental value unique to wood. Furthermore, it is registered as a **Ministry of Land, Infrastructure, Transport and Tourism NETIS technology "TH-250021-A,"** aiming for widespread adoption in various sites, starting with public works. Wood, NETIS, civil engineering, CLT, wooden lightweight sheets. We will continue to support challenges in both the field and sports from Okayama. Masters Koshien (Okayama) https://masters-okayama.com/

Features: ● Intel Core Ultra (Series 2) processor LGA 1851 socket (CPU sold separately) ● DDR5 6400MT/s dual-channel support, CU/U-DIMM x2 (up to 128GB) (memory sold separately) ● M.2 M-Key x1, E-Key x1 ● USB 3.2 x4, USB 2.0 x8 ● Intel Ethernet Controller I226-V (2.5GbE) x2 ● SATA 6Gb/s x2 (supports RAID 0 / 1 / 5) ● PCI Express Gen5 x16 x1, PCI Express Gen4 x4 x1, PCI Express Gen4 x1 x1 * This model does not include memory, storage, or OS.

Features: ● Intel Core Ultra 200S series processor LGA 1851 socket (up to 125W) (CPU sold separately) ● DDR5 6400MT/s dual-channel compatible, CU-DIMM/U-DIMM x4 (up to 256GB) (sold separately) ● M.2 M-Key x2, E-Key x1, B-Key x1 ● USB 3.2 x8, USB 2.0 x6 ● 2.5GbE LAN x3 ● SATA 6Gb/s x2 (supports RAID 0 / 1 / 5) ● PCIe Gen5 x16 x1, PCIe Gen4 x4 x2, PCIe Gen4 x1 x1 ● Compatible with ATX power supply * This model does not include memory, storage, or OS.

Features: ● Supports Intel Core Ultra 200S series processors with Intel H810 chipset and LGA1851 socket (up to 125W) (CPU sold separately) ● DDR5 CSO-DIMM x2 (up to 128GB) (memory sold separately) ● 2.5GbE LAN x2 ● HDMI x2, DisplayPort x1, LVDS/eDP x1 (supports simultaneous output of up to 3 screens) ● SATA 6Gb/s x4, M.2 M-Key x1, M.2 E-Key x1, M.2 B-Key x1, PCI Express Gen5 x16 x1 ● USB 3.2 Gen2 x2, USB 2.0 x8, RS-232/422/485 x1, RS-232 x5 ● Compatible with ATX power supply * This model does not include memory, storage, or OS.