[Case Study] High-pressure cleaning of the bottom of an artificial shallow pond in the garden of a certain company facility in Tokyo.

Significantly faster than conventional high-pressure washing! For cleaning the bottom of a pond close to 1,000m2, the work can be completed in 4 days.

We received a request regarding a man-made pond approximately 20 cm deep that has become murky due to the inflow of dead leaves and the growth of moss and algae. Since it is impossible to clean while there is still water in the pond, we drained all the water, removed the dead leaves and algae, and then proceeded with the cleaning. To clean after draining, we needed a system that allows for simultaneous wastewater collection during the cleaning process, so we introduced our "HOTJEBLO Fujiyama R2." We were able to demonstrate that the simultaneous suction method is effective for cleaning, as the moss removed during the cleaning tends to reattach. 【Case Summary】 ■ Equipment Used: HOTJEBLO Fujiyama R2 ■ Issues: - The pond becomes murky due to the inflow of dead leaves and the growth of moss and algae in a man-made pond approximately 20 cm deep. - A system that allows for simultaneous wastewater collection during cleaning is necessary for continued work after draining. *For more details, please refer to the PDF document or feel free to contact us.

• High pressure cleaner

Overwhelming reduction in work time! By eliminating wastewater discharge and enabling simultaneous cleaning and wastewater collection, it is possible to centralize the process.

We have verified how the "Hot Jeblo Method" is superior to conventional high-pressure washing. Conventional high-pressure washing requires protective measures against splatter and post-treatment of wastewater, but with the "Hot Jeblo Method," there is no wastewater runoff, allowing for the integration of washing and simultaneous wastewater collection. The advantage of simultaneous washing and wastewater collection is a significant reduction in work time. We have a verification video, so please take a look. 【What is the HOTJEBLO Cleaning System?】 ■ HOT (hot water device) + JET (high-pressure pump) + BLOWER (vacuum) ■ Integration of high-pressure washer, hot water device, and vacuum ■ Simultaneous processing of washing, rinsing, and wastewater treatment in three steps ■ Significant reduction in work time and labor *For more details, please refer to the PDF document or feel free to contact us.

• High pressure cleaner

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites, it has long been common to think of "steel plates when it comes to ground sheets." However, since the required performance varies from site to site, there is no need to limit ground sheets to just one material. Hyper CLT ground sheets are a new type of civil engineering ground sheet that utilizes wood CLT. They can be widely used for temporary roads, access routes, material yards, and worker pathways, and are characterized by being lightweight and easy to install and remove. Furthermore, they add unique values of wood to the site, such as reducing summer glare, minimizing metal noise, and fixing CO2. The important thing is not to replace all steel plates with wood. In areas where loads are concentrated, steel plates can be used, while CLT can be chosen for places that prioritize lightweight and environmental considerations, allowing for appropriate material selection based on the situation. Hyper CLT ground sheets are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS as "TH-250021-A." As a new technology registered with NETIS, it is not about "iron or wood," but rather about selecting the optimal ground sheet based on the site conditions. A new standard in civil engineering is beginning.

Air Leak Tester for Micro Volume Work 【FLZ-0220-A4+LPU-300】 This is the FLZ-0220, a separate type leak tester designed for controlling the pneumatic unit LPU-300. It features a high-performance controller "FLZ-0220" and an ultra-compact detection unit "LPU-300" that minimizes the piping volume to the limit, allowing it to be placed very close to the test specimen (inspection target: workpiece). This combination detects "micro leaks," which were previously buried in noise with conventional testers, with high precision and speed. The 【LPU-300 series】 is the smallest measurement unit in Fukuda's history, making it ideal for direct attachment to as small a workpiece as possible for measurement. It is possible to increase measurement sensitivity compared to standard all-in-one leak testers (depending on conditions). 【Features】 ■ Eliminates measurement noise to the extreme ■ Detection resolution is the highest precision in our company ■ Dedicated tester for small volume products Since the medium used for testing is air, there are no running costs.