Notice of Participation in the 7th Ceramics Japan [Kansai Exhibition]

These are conductive ceramics that can be tailored for specific characteristics, ranging from mΩ (milliohms) to GΩ (gigaohms) depending on the application.

Ceramics are materials that excel in mechanical properties, balancing wear resistance (hardness) and strength, and are widely used in our products, such as suction transport nozzles for surface mount machines. Generally, ceramics are electrically insulative (materials that do not conduct electricity), but in recent years, there has been a demand for conductive ceramics in semiconductor and electronic component manufacturing processes and the electronics field for static electricity countermeasures. To meet such needs, we have developed our unique conductive ceramics.

• Contract manufacturing
• Ceramics
• Fine Ceramics

Porosity up to 98%! It is a metal porous body with excellent air permeability!

It is a porous metal material containing numerous pores like a resin sponge. Each pore is part of a continuous bubble structure, allowing fluids to pass through reliably. Additionally, compared to plates/blocks, the specific surface area is improved by several hundred times, making it suitable for use as a reaction layer or filter. Examples of applications (consideration cases): - Components for fuel cells (gas diffusion layers, separators, electrodes) - Reaction electrodes - Catalyst supports - Filters (air filters, grease filters, etc.) - Components for factory automation (adsorption plates, adsorption transport pads) - Medical field applications (artificial joint components, bone regeneration treatment materials)

• Metal bearings
• Contract manufacturing
• Other metal materials

It is 3D printing processing of ceramics! It is possible to directly manufacture ceramic parts from CAD data!

Ceramics 3D printing is a new technology for shaping ceramics using a 3D printer. By applying the ceramic molding materials (filaments) developed by our company, three-dimensional shaping of ceramics is possible with a typical FDM (Fluid Deposition Modeling) 3D printer.

• Other molds
• Contract manufacturing
• Processing Contract

It is a catalyst for ozone decomposition that supports ozone treatment.

The ozone decomposition catalyst, NO honeycomb, is an air purification filter with a catalyst attached to a ceramic honeycomb. Ozone (O3) has strong oxidative power and is used for applications such as sterilization, virus inactivation, deodorization, and decolorization. However, due to its oxidative power, it is toxic to organic matter and can have harmful effects on the human body at high concentrations. To utilize the characteristics of ozone safely, our NO honeycomb is used as an ozone decomposition catalyst, which breaks down ozone into oxygen molecules (O2) and oxygen atoms (O) through the action of the catalyst. The sterilization and virus inactivation treatment using ozone is gaining attention.

• Processing Contract
• Other polymer materials
• Wood products

It is a ceramic honeycomb filter that decomposes and absorbs air pollutants such as NOx/SOx!

The air pollutants contained in combustion exhaust gases from vehicles such as automobiles, NOx (nitrogen oxides) and SOx (sulfur oxides), are purified using the acidic gas absorbent "NC Honeycomb" developed by our company. Our NC Honeycomb decomposes and absorbs NOx and SOx through catalytic action, thereby suppressing air pollution caused by combustion exhaust gases. It has been adopted in the exhaust systems of tunnels in the metropolitan expressway.

• Processing Contract
• Other polymer materials
• Wood products

It is a ceramic honeycomb filter that deodorizes, removes smoke, and purifies the air using platinum catalysts.

Platinum is a catalyst used for purifying automobile exhaust gases, with features such as: - High activity (promotes reactions more effectively) - Excellent durability Our oxidation catalyst, NA honeycomb, is a filter that has platinum catalyst attached to a ceramic honeycomb. By using a honeycomb structure and support body, it achieves purification treatment with platinum catalyst at low pressure loss and high efficiency.

• Processing Contract
• Other polymer materials
• Wood products

Ultra-fine honeycomb structures of the world's smallest class. They are manufactured using a molding method with extrusion and can also be applied to thermoplastic resins.

Micro-honeycomb is a fine lattice structure formed using extrusion molding molds that leverage our fine hole and fine groove processing technology, exceeding 10,000 cells/in². We have a wide range of production achievements with various materials, including: - Ceramics (alumina, zirconia, etc.) - Metal materials (stainless steel) - Filler-containing thermoplastic resin materials Since it is produced using the extrusion molding method, which continuously discharges uniform cross-sectional shapes, it is also possible to manufacture integrated parts exceeding a length of 200mm. In addition to the production of honeycomb structures using our owned molds, we also accept new designs and prototypes starting from mold production, as well as external sales of molds only. *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• Other molds

In addition to square, hexagonal, and octagonal grids, we also accommodate irregular shapes! We will design molds according to your preferences.

At Nagamine Seisakusho, which provides a wide range of ultra-precision molded products using microtechnology, we handle "precision honeycomb extrusion molding dies." Honeycomb structures have the advantage of significantly increasing the contact area for fluids while minimizing pressure loss. We can accommodate not only square, hexagonal, and octagonal grids but also irregular shapes. We will design the mold according to your desired grid shape and molding machine. 【Design Specifications】 ■ Hole diameter: Min. φ0.8mm ■ Groove width: Min. 0.05mm ■ Pitch accuracy: ±10μm ■ Hole diameter accuracy: ±10μm ■ Groove width accuracy: ±10μm *For more details, please refer to the PDF materials or feel free to contact us.

• Mold Design
• Contract manufacturing
• Processing Contract

A nozzle with a hole diameter of 200μm or less, which is not commonly handled as a standard product. The tip is made of ceramic, so it can also be cleaned with solvents.

Our dispenser nozzle is a coating nozzle designed for tabletop dispensers, featuring a ceramic tip. 【Features】 - As a standard nozzle for tabletop dispensers, we can manufacture nozzles with a hole diameter of less than 200μm, which are not commonly available. (We can accommodate a minimum hole diameter of 5μm.) - The standard metal holder has a double-thread specification, allowing for direct attachment to commercially available dispensers and syringes. - The nozzle tip is made of ceramic, making it suitable for cleaning with solvents and thermal processing. (We will select materials according to the cleaning method.) - The inner surface of the nozzle has a tapered cross-section, produced through injection molding using molds, resulting in high smoothness and improved flow and coating properties. The inner and outer diameters of the nozzle tip can be manufactured to your specified dimensions. We also accept custom specifications for the metal holder. For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• dispenser

Introducing Chofune Manufacturing's "Ceramics Precision Micro Parts" and their features!

We would like to introduce Nagamine Seisakusho's "Ceramics Precision Micro Parts," which offers a wide range of ultra-precision molded products using microtechnology. Our company provides "IC Chip Suction Nozzles (for Surface Mount and IC Chip Transport)" that are compatible with the next-generation surface mount standards "03015" and "0201," as well as "Dispenser Nozzles/Inkjet Nozzles (for Liquid Dispensing and Droplet Ejection)" that can reduce wear even during high-pressure discharge. **Features of the IC Chip Suction Nozzle (for Surface Mount and IC Chip Transport):** - Utilizes fine ceramics with excellent wear resistance → Contributes to longer component lifespan and reduced nozzle replacement frequency - Minimizes machining by leveraging injection molding → Achieves low-cost and short lead time for mass production - Static electricity countermeasures are possible with conductive ceramic materials - Nozzles can be manufactured to match various mounting machines *For more details, please refer to the PDF document or feel free to contact us.*

• Contract manufacturing
• Processing Contract

Used for the exhaust outlets of the Central Circular Route Tunnel in the capital! It absorbs and decomposes exhaust gases and unpleasant odors.

The "Honeycomb Catalyst and Absorbent" responds to environmental conservation by absorbing and decomposing exhaust gases from sources of air pollution and unpleasant odors. Our NC honeycomb is widely used for ventilation in tunnels such as roads and for exhaust gas treatment in underground parking lots. It serves its catalytic function by allowing passage through the honeycomb structure. Since it is molded from our own extrusion molds, we can accommodate your requests regarding cell count, wall thickness, and size. 【Features】 ■ Absorbs and decomposes exhaust gases from sources of air pollution and unpleasant odors ■ Honeycomb catalyst that can neutralize acidic gases with alkalinity ■ Customizable cell count, wall thickness, and size according to your needs ■ Selection of catalyst materials tailored to your intended application is possible ■ We also accept prototype molding of materials you provide *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other polymer materials
• Wood products

In recent years, the pharmaceutical and medical industries have faced urgent challenges, including the digitization of standard operating procedures (SOPs) and the strengthening of continuous education and human resource development. In this webinar, we will introduce a comprehensive system that not only streamlines operations but also consistently supports education and human resource development by integrating Agatha's SOP management cloud solution "Agatha SOP" with "Ave-TMS," a training management system provided by BIO-TREND BIOPRODUCTS, with whom Agatha has recently signed a distribution agreement. [Program] Part 1: 14:00 - 14:20 "Introduction to Agatha Solutions" Agatha Inc. Sales & Marketing Department, Quality Group Part 2: 14:20 - 15:00 "Ave-TMS Demo Presentation" BIO-TREND BIOPRODUCTS Project Manager, Choi Woo-Chun *For Q&A, please fill out the survey displayed after the webinar, and we will respond later.

[Speaker] Toshio Kawamoto, Managing Director / Head of Cross Creation Group, NTT Data Management Research Institute, Business Transformation Unit, and Co-representative of Social Innovation Alliance Japan Denmark Takaaki Sukegawa, Senior Manager [Lecture Items] 1. Competitiveness and Governance in the Post-Generative AI Era - Toshio Kawamoto [13:00 - 14:00] 1. Introduction to NTT Data Management Research Institute 2. Major countries' perspectives on AI utilization 3. Considerations for companies when building AI governance 4. Examples of AI governance construction in Japan 5. Introduction of our company's achievements in related projects 6. Q&A / Business card exchange 2. On-Site AI Risk Management in Europe ~Introduction to Trends in AI Utilization in Europe and Advanced Centralized AI Risk Management Solutions~ - Takaaki Sukegawa [14:10 - 15:10] 1. Overview of centralized AI risk management 2. Detailed approach 3. Introduction of case studies applying the approach 4. Q&A / Business card exchange

[Speaker] Daiki Suzuki, Senior Researcher, Nature and Climate Division, SOMPO Institute Plus Inc. [Key Lecture Content] As we enter 2025, global environmental and sustainability regulations are at a turning point. There are rapid movements of backlash, such as the retreat of U.S. climate policy under the second Trump administration and the simplification of regulations symbolized by the EU's omnibus bill. While the situation is difficult to predict, long-term demands such as investor expectations and decarbonization continue, and in Japan, the mandatory disclosure of sustainability is steadily progressing. In this lecture, we will overview the complex domestic and international situations surrounding sustainability and explore the direction companies should take in the future, incorporating case analyses. [Lecture Topics] 1. Overview of sustainability regulations 2. Unchanging expectations of capital markets and long-term trends 3. Detailed analysis of regional regulations 4. New regulatory frontiers 5. Direction of corporate responses, etc. 6. Q&A

[Instructor] Attorney Shinya Tsuchiya, Ishizaki & Yamanaka Law Office [Key Lecture Content] When various problematic behaviors occur among employees, such as poor work attitude, harassment, and lack of cooperation, if the employer mismanages the response, it can not only significantly disrupt workplace order and operational efficiency but also potentially invalidate the legal effectiveness of disciplinary actions or personnel measures taken against the employee in question. To avoid such risks, appropriate and consistent responses based on employment regulations and internal systems are required. On the other hand, dealing with "problematic employees" often places a significant psychological and practical burden on busy supervisors and HR personnel. In order to maintain smooth business operations, it has become essential to provide support to those responding and to prepare as an organization. In this seminar, we will systematically organize practical knowledge that is useful in the field, focusing on legal points and practical strategies to consider when responding to various types of "problematic employees" that have recently become more apparent, while assuming specific scenarios.

[Instructor] Takahisa Saito, Human Resources Consultant, Saito Social Insurance and Labor Office [Key Lecture Content] Human resource systems support the foundation of an organization. However, if the operation is neglected, the system itself will collapse. There are various systems, but among them, the "grade system, evaluation system, and wage system" can be considered the three major elements. We must design these three major elements with operational considerations in mind. In other words, it is important that the system is easy for management to operate. There is no need to overthink it. Additionally, as work style reforms progress, we must also consider the response to equal pay for equal work. I believe that what lies ahead after organizing the current situation is the "limited regular employee" system. In this seminar, we will share anticipated information and provide clear explanations. Furthermore, for those attending in person, meaningful information exchange is possible through mutual confirmation during Q&A sessions. [Lecture Items] 1. Trends and Perspectives Surrounding Human Resources 2. Basics of the Grade System 3. Basics of the Evaluation System 4. Basics of the Wage System 5. Considering Equal Pay and Job-Based Employment 6. Q&A / Business Card Exchange