Added coating examples to the product page [Coating for plate heat exchangers].

Improving maintainability! Ceramic coating (Sera Armor) on plate-type heat exchangers (plate section).

Plate-type heat exchangers are used in various industries, but removing dirt such as scale takes a significant amount of time and cost. If left dirty, it leads to a decrease in heat exchange efficiency. Recently, due to environmental considerations, the use of cleaning agents has become increasingly difficult. Shine Kogei's ceramic coating, "Cera Armor," has high non-stick and slip properties in the coating itself. As a result, dirt is naturally removed as the fluid comes into contact with it during operation. This acts like automatic cleaning and contributes to simplifying regular maintenance. Companies involved in the design, sales, and maintenance of plate-type heat exchangers are conducting demonstration experiments with heat exchanger plates coated with "Cera Armor."

• Surface treatment contract service
• Heat exchanger

Shine Craft's ceramic armor coating solves all issues related to release properties, heat resistance, and wear resistance at once!

The Sera Armor Coating film has obtained not only compliance with the Food Sanitation Act but also FDA approval in the United States! It is a non-toxic and harmless coating material that achieves a high hardness coating (pencil hardness 5 to 9H), heat resistance (continuous use at 500°C), and release properties equivalent to fluororesin, while also exhibiting far-infrared and antibacterial effects! Additionally, since the firing temperature can be low, it not only reduces the load on metal materials but can also be widely used on non-ferrous materials such as glass and plastics. ◆ Inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. The nature of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be helpful for estimating and calculations.

• Processing Contract

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

Hotron's vehicle detection sensors allow you to search for products that meet your needs in three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles, alerting you with rotating lights or switching the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.