Extension of the special campaign for PoE++ powered switches! Available until September 30, 2022" - "Offering a multi-gig compatible 90W powered switch, ideal for aggregating PoE powered devices, at up to 53% off.

High-speed, large-capacity connectivity compatible with a wide range of applications from edge to distribution! Gigabit Intelligent Stackable Switch.

The CentreCOM x530L series is a switch equipped with Gigabit interfaces and 10G uplinks, available in both Non-PoE+ and PoE+ models. ■ Provides 10G high-speed and large-capacity connections All four SFP/SFP+ slots can be used as 10G uplinks. It also supports VCS, which allows multiple switches to be virtually combined into a single switch, enabling the expansion of multi-gigabit interfaces through mixed stacking configurations with the x530 series. ■ Availability and scalability to meet various requirements It supports IPv4 static, RIP, and OSPF routing as standard, with the option to add features such as IPv6 dynamic routing through licensing. Additionally, it achieves redundancy with two built-in power supplies and a high PoE power supply capability of 740W per chassis (PoE+ model only). ■ Supports network autonomous optimization It is compatible with AMF, promoting the simplification and efficiency of designing, building, operating, and managing increasingly diversified and complex networks as an AMF member. *For more details, please refer to the related links or feel free to contact us.*

• Communications
• Routers, Switches, and Hubs

High-capacity PoE++ power supply/PoE passthrough compatible! Gigabit intelligent switch suitable for various environments.

The CentreCOM x320 series is a Layer 3 Gigabit Intelligent Switch equipped with a fanless design, high-capacity PoE++ power supply/PoE passthrough functionality, and rich switching and routing capabilities provided by the proven Allied Ware Plus OS. It features a wide operating temperature range from -10 to 55°C and allows for functionality expansion through various licenses, making it suitable for a wide range of applications from offices to factories, warehouses, and smart buildings. ■AT-x320-10GH This is a PoE++ switch powered by a separately sold 300W power supply unit. It has 8 ports of 1GE that can supply up to 90W of power, providing stable PoE power for high-power-consuming devices. ■AT-x320-11GPT This is a PoE passthrough compatible switch that can be powered and provide PoE power using the included AC adapter or PoE input. With PoE passthrough, it can supply power without a power outlet, allowing for network extension to remote locations and enhancing the flexibility of device placement. *For more details, please refer to the related links or feel free to contact us.

• Routers, Switches, and Hubs

Optimal for ultra-high speed, large capacity, and large-scale environments! A high-performance model that pursues improved performance and comfort in various wireless LAN environments.

The AT-TQ6702 GEN2 is a wireless access point (AP) equipped with two radios that supports the latest standard, IEEE 802.11ax 8x8 streams, enabling simultaneous use of the 2.4GHz and 5GHz bands with a maximum capacity and speed of 4.8Gbps. It supports 8-stream uplink and downlink MU-MIMO, increasing the maximum communication speed by approximately 2.7 times compared to the previous ac standard, allowing for high-capacity and high-speed communication. It can operate in standalone mode and is also compatible with centralized management via AT-Vista Manager EX, making it suitable for a wide range of applications. ■ High-capacity and high-speed communication By utilizing 1024QAM modulation, the maximum communication speed per unit has improved to approximately 6Gbps (2.4+5GHz bands). ■ Low-latency communication Features such as bidirectional MU-MIMO and OFDMA enable efficient communication with multiple devices. ■ AWC support When managed with AT-Vista Manager EX, it supports AWC. It autonomously optimizes radio output based on the surrounding conditions, reducing operational costs. *For more details, please refer to the related links or feel free to contact us.

• Wireless LAN

Optimal for high-speed, large-capacity, and large-scale environments! A high-performance model that pursues improved performance and comfort in various wireless LAN environments.

The AT-TQ6602 GEN2 is a wireless access point (AP) equipped with two radios that supports the latest standard, IEEE 802.11ax 4x4 streams, enabling simultaneous use of the 2.4GHz and 5GHz bands with a maximum capacity and speed of up to 2.4Gbps. It supports 4-stream uplink and downlink MU-MIMO, increasing the maximum communication speed by approximately 1.4 times compared to the previous ac standard, allowing for high-capacity and high-speed communication. It can operate in standalone mode, and it also supports centralized management via AT-Vista Manager EX, making it suitable for a wide range of applications. ■ High-capacity and high-speed communication The modulation scheme supports 1024QAM, enabling further increases in capacity and speed. ■ Low-latency communication Features such as bidirectional MU-MIMO and OFDMA enable efficient communication with multiple devices. ■ AWC support When managed via AT-Vista Manager EX, it supports AWC, autonomously optimizing radio output based on surrounding conditions to reduce operational costs. *For more details, please refer to the related links or feel free to contact us.

• Wireless LAN

Optimal for ultra-high speed, large capacity, and large-scale environments! This cost-performance-focused model retains the 8×8 performance of Wi-Fi 6 while limiting scale and functionality.

The AT-TQm6702 GEN2 is a wireless access point (AP) equipped with two radios that supports the latest standard, IEEE 802.11ax 8x8 streams, enabling simultaneous use of the 2.4GHz and 5GHz bands with a maximum capacity and speed of 4.8Gbps. It supports 8-stream uplink and downlink MU-MIMO, resulting in approximately 2.7 times the maximum communication speed compared to the previous ac standard, allowing for high-capacity and high-speed communication. It can operate in standalone mode and is also compatible with centralized management via AT-Vista Manager EX, making it suitable for a wide range of applications. ■ High-capacity and high-speed communication Utilizing 1024QAM modulation, the maximum communication speed per unit has improved to approximately 6Gbps (2.4+5GHz bands). ■ Low-latency communication Features such as bidirectional MU-MIMO and OFDMA enable efficient communication with multiple devices. ■ AWC support When managed via AT-Vista Manager EX, it supports AWC, autonomously optimizing radio output based on surrounding conditions to reduce operational costs. *For more details, please refer to the related links or feel free to contact us.

• Wireless LAN

Optimal for high-speed, large-capacity, and large-scale environments! This cost-performance-focused model retains the 4×4 capabilities of Wi-Fi 6 while limiting scale and functionality.

The AT-TQm6602 GEN2 is a wireless access point (AP) equipped with two radios that supports the latest standard, IEEE 802.11ax 4x4 streams, enabling simultaneous use of the 2.4GHz and 5GHz bands with a maximum capacity and speed of up to 2.4Gbps. It supports 4-stream uplink and downlink MU-MIMO, increasing the maximum communication speed by approximately 1.4 times compared to the previous ac standard, allowing for high-capacity and high-speed communication. It can operate in standalone mode, as well as support centralized management via AT-Vista Manager EX, making it suitable for a wide range of applications. ■ High-capacity and high-speed communication It utilizes 1024QAM modulation, enabling further increases in capacity and speed. ■ Low-latency communication Features such as bidirectional MU-MIMO and OFDMA enable efficient communication with multiple devices. ■ AWC support When managed with AT-Vista Manager EX, it supports AWC, autonomously optimizing radio output based on surrounding conditions to reduce operational costs. *For more details, please refer to the related links or feel free to contact us.

• Wireless LAN

CLT, which has been widely adopted in the construction field, is now expanding its applications into the civil engineering sector. The "Hyper CLT Mats" are civil engineering CLT products that utilize wood CLT as temporary materials. Traditionally, steel plates have been the mainstream choice for temporary roads, access routes, and heavy machinery yards. The Hyper CLT Mats introduce a new option of "wood" to that market. The 5x10 mats weigh approximately 230 kg, making them lightweight and easy to install and remove with small machinery, with a maximum capacity of 40 mats on a 10-ton truck. They also have advantages in terms of workability and transportation efficiency. Moreover, they offer added value that can only be achieved with wood, such as glare reduction, noise control, CO2 fixation, and consideration for aesthetics. This product is expected to be a new proposal for not only construction companies but also building material firms, lumber companies, and material trading companies. It is a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS, with the registration number "TH-250021-A." The use of wood is not limited to construction anymore. The utilization of Hyper CLT Mats is expanding as a new market that connects civil engineering and wood.

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Stable adhesion to rough and uneven surfaces such as stone, sheet metal, textured glass, and wood. Piab's "PX Suction Cup Series" is designed for handling rough surfaces, patterned surfaces, and uneven workpieces that are difficult to hold with standard flat suction cups. The high-conformity EPDM sealing ring adapts to the irregularities and shapes of the work surface, while the rigid aluminum support plate and internal support pad provide a stable grip. The internal support pad helps stabilize thin sheets and delicate workpieces while minimizing suction marks. It is suitable for demanding industrial applications involving stone, metal, glass, and wood. Additionally, a cone valve integrated version is also available. By preventing leaks from suction cups that do not contact the workpiece, it enhances safety during transport while reducing air consumption. This is also effective for energy-saving measures in large-area grippers that use multiple suction cups.