【New Catalog Release】The English version of the coating device "Spiral Spray Coating System" catalog has been newly released!

A stable coating method that can be applied non-contact when you want to apply a thin and wide layer for product bonding! Regardless of low or high speed, it achieves minimal splatter and beautiful uniform coating!

The "Spiral Spray" is a method of applying hot melt in a spiral fiberized form onto the substrate. It achieves beautiful spiral application with minimal scattering, regardless of low or high speeds. It is also possible to apply using a foaming machine for foamed spirals. 【Features】 ■ Soft finish with a pleasant texture and breathability ■ Reduces waste/loss of hot melt adhesives ■ Solvent-free/low-solvent for environmental/recycling measures ■ High-speed intermittent adhesion is possible. The spiral can accommodate up to 72,000 rotations per minute, with a width of approximately φ15–20mm. 【Features of the nozzle with secondary air】 ■ The guide air stabilizes the pattern, and the clean air protects the nozzle, significantly reducing maintenance without foreign matter adhesion. ■ Spiral application of high-viscosity hot melts, which was difficult with conventional methods, is now possible. * For more details, please refer to the PDF document or feel free to contact us. 【Applications/Examples of Achievements】 ■ Non-woven fabrics ■ Films ■ Filters

• Painting Machine
• spray
• Other painting machines

This document introduces case studies of problem-solving related to the "Spiral Coating Device" handled by our company.

The "Spiral Spray" is a method of applying hot melt in a spiral fiberized form onto the substrate. It is a stable non-contact application method suitable for thin and wide coatings when bonding products, capable of spiraling up to 72,000 revolutions per minute, with a width of approximately φ15 to 20mm. Regardless of low or high speeds, it minimizes splatter and achieves a beautiful spiral application. It is also possible to apply using a foaming machine with a foaming spiral. 【Features】 - Soft finish with a pleasant texture - Reduces waste/loss of hot melt adhesive, environmentally friendly with solvent-free/low-solvent options for recycling - Uniform application weight with breathability/water permeability, allowing for beautiful and even coating - Unique nozzle with secondary air, compatible with adhesives from high to low viscosity - Capable of high-speed intermittent bonding 【Features of the Nozzle with Secondary Air】 - Stable pattern with guide air - Maintenance is greatly reduced as clean air protects the nozzle from foreign substances - Spiral application of high-viscosity hot melt, which was difficult with conventional methods, is now possible We would like to introduce one example of a company that has adopted these features.

• Painting Machine
• spray
• Other painting machines

We have newly added a **"Frequently Asked Questions Q&A"** section to the Hyper CLT sheet website. It clearly summarizes many questions frequently asked by those considering the introduction of the product, such as "What types of civil engineering sites can it be used on?", "Can it be used on rainy days?", "Is it compatible with large machinery?", and "What is NETIS?". The Hyper CLT sheet is a lightweight wooden sheet utilizing wood CLT, suitable for a wide range of applications including temporary roads, access routes, and heavy machinery work yards. It is also registered as a **Ministry of Land, Infrastructure, Transport and Tourism NETIS registered technology "TH-250021-A"**. Since it is a new material, we will not leave any uncertainties unaddressed. We aim to create a website that makes it easy to resolve questions before introduction, including information on wood, NETIS, civil engineering, and CLT, and we will continue to enhance the Q&A section.

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

We have published the latest issue (No. 94) of the ISO-related information magazine "Intertek News." Intertek News delivers information and various topics related to ISO audits, certifications, and verifications. This issue features a special section titled "Interpreting Standard Revisions," which introduces key points of management system standard requirements that new personnel should understand as preparation for standard revisions. Additionally, we have included customer case studies, articles contributed by auditors, and information on certifications and standards, as well as the latest topics, so please take a look.