We will be exhibiting at the 10th Kansai Film Tech Japan (May 11-13, 2022).

Just spread it out to set it up! Just close it to store it! Please check it out at "Tokyo Big Sight Hall 1, 1-6 from June 22 to June 24"!

Features: - Can be easily folded without tools. - Can be folded while the HEPA clean unit is installed. - Equipped with dual-wheel casters that allow for easy movement in all directions. - Designed to prevent tipping, ensuring safe use. - Customizable specifications to meet customer needs. We will be exhibiting at the following trade show: | Trade Show | 5th Factory Equipment and Supplies Exhibition (Japan Manufacturing World) | | Dates | June 22 (Wednesday) to June 24 (Friday), 2022, 10:00 AM to 6:00 PM (ends at 5:00 PM on the last day) | | Venue | Tokyo Big Sight | | Booth Number | Hall 1, 1-6 | If you wish to have a business meeting during the exhibition, please apply through the visitor reservation form linked below.

• Clean Booth
• Other clean room equipment and facilities
• air conditioning

Keep the inside clean while exhausting!

Ceiling: Incorporates a clean module unit to keep the interior clean. Work surface: The work surface is made of SUS. Waste liquid can be drained through the drain. Back: The back grille can be opened and closed to adjust the exhaust flow rate and exhaust position.

• Other physicochemical equipment

Made of all stainless steel, extremely durable!

Work surface: The work surface also uses SUS, which offers excellent durability. Back panel: The back panel can be opened and closed, allowing for adjustments to the exhaust flow and exhaust position according to the solvent used.

• Other physicochemical equipment

The dehumidification capability has been enhanced. It is set for low humidity with a setting value of 10% RH to the surrounding humidity.

This is a desiccator that has been meticulously designed with a focus on airtightness, operability, and safety, thanks to our unique technology and know-how that developed the first aluminum frame plastic desiccator in the country. It is equipped with a powerful dehumidifier, DEHUMER, which can handle door opening and closing as well as large storage. It operates on a forced convection system, controlled by the opening and closing of the intake and exhaust valves inside the chamber. After reaching the set humidity, it uses a semiconductor sensor for ON-OFF control. You can choose the specifications of the door: MK: Magnetic packing type HK: Sealed handle type We also offer a wide range of accessories, including additional shelves, slide rails, hygrometers, and earthquake-resistant door locks. Please feel free to contact us.

• Dehumidifier

A large vacuum desiccator capable of accommodating various tests and research!

You can use it for the following tests and research. ▼ Vacuum forming de-airing device ▼ Storage of chemicals and products that are sensitive to general air environments such as oxygen and carbon dioxide We can accommodate various specifications such as size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

It is a small vacuum desiccator with a lid that opens upwards.

This is a small vacuum desiccator with a capacity of 12L. The lid opens upwards. It can be used for tests and research such as: ▼ Defoaming device for vacuum molding ▼ Storage of chemicals and products that dislike general air environments such as oxygen and carbon dioxide We can accommodate various specifications including size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

A compact vacuum desiccator capable of accommodating various tests and research!

You can use it for the following tests and research. ▼ Vacuum forming de-airing device ▼ Storage of chemicals and products that are sensitive to general air environments such as oxygen and carbon dioxide We can accommodate various specifications such as size, material, power supply, and stirrer installation. Please feel free to contact us!

• Drying Equipment

The dehumidifying capability has been enhanced. It is suitable for low humidity with a setting value of 10% RH to the surrounding humidity.

▼ This is a desiccator that has been meticulously designed with a focus on airtightness, operability, and safety, developed with unique technology and know-how as the first aluminum frame plastic desiccator in the country. ▼ Equipped with a powerful dehumidifier DEHUMER that can handle door opening and closing as well as large storage. It operates on a forced convection system, controlling the opening and closing of the intake and exhaust valves inside the chamber. After reaching the set humidity, it performs ON-OFF control using a semiconductor sensor. ▼ You can choose the specifications of the door. MK: Magnetic packing type HK: Sealed handle type ▼ We also offer a wide range of accessories, including additional shelves, slide rails, hygrometers, and earthquake-resistant door locks. Please feel free to contact us.

• Dehumidifier

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.