Notice of Participation in 'ThermoTech 2022' from June 1 (Wednesday) to June 3 (Friday), 2022

★Demo unit available for loan★ - Domestic dew point meter capable of measuring dew points from -100 to +20 ℃dp.

● Domestic development and manufacturing ● Dew point measurement from -100 to +20 ℃dp ● Accuracy ±2 ℃dp ● Usually in stock ● Comprehensive support system ● Traceability available ■ Techne Measurement Co., Ltd. has been handling moisture management and measurement instruments centered around dew point meters for the past 40 years. The capacitive (impedance) TK-100 online dew point meter is a flagship product of Techne Measurement Co., Ltd. The TK-100 online dew point meter consists of the TK-100 transmitter, monitor, and sensor cable, allowing for easy initiation of dew point measurement. For more details, please download the catalog or contact us. #MoistureMeter

• Temperature and humidity measuring instruments

High-precision mirror-type dew point meter. It has a built-in pump, flow meter, and pressure sensor, allowing for accurate low dew point measurements.

● Dew point measurement range: -75 ℃dp to +20 ℃dp (MBW973S/E/CA) ● Realization of high response speed with ORIS function ● Built-in pump, flow meter, and pressure sensor (varies by model) ● Equipped with Stirling cooler (only for 973L) ■ The MBW973 dew point meter uses the ORIS (Optimum Response Injection System) function to forcibly add a small amount of moisture to the mirror surface, increasing the amount of condensation on the mirror surface. This achieves a reduction in the time required to stabilize in low dew point regions. Additionally, with the built-in pump, flow meter, and pressure sensor, measurements can be started immediately. Model selection examples: 【Low dew point range up to -80 degrees】→ MBW973L 【Low dew point range up to -60 degrees】→ MBW973S For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments

An all-in-one unit that completes moisture measurement in oil!

★It can be installed as is and used immediately! ■ Polymer-based oil moisture meter ■ Moisture activity value measurement range 0-1 aw ■ Measurement in ppm is possible ■ TFT display option available* *There are also selection options such as a patrol light, so please refer to the basic information. The core moisture detection component of the EE360 oil moisture meter installed in TKZH002 uses a polymer sensor utilizing thin-film technology. *Only for the EE33 temperature and humidity dew point transmitter for high humidity and harsh environments. It is a high-performance, high-response moisture meter with minimal aging changes. Since it provides continuous online measurements, it alerts you to moisture levels and the timing for oil replacement before water contamination affects insulation performance.

• Other electronic measuring instruments

For oil deterioration diagnosis! Displays moisture activity value (aw), oil temperature (°C), and moisture content (ppm). A multifunctional handheld measuring device, Techneport Oil.

● Measurement of water activity value (aw) and oil temperature (°C) to calculate water content (ppm) ● TFT touchscreen ● 10 types of oil parameter settings available ● Data logging function (approximately 2 million points) ● One-point or two-point calibration using a simple calibration kit (optional) ■ TEKHNEport-Oil measures the water activity value (aw) and oil temperature (°C) in oil, allowing for the calculation of water content (ppm). It can store parameters for 10 different types of oil needed for conversion, enabling the management of multiple types of oil with a single unit. Using these parameters, more accurate measurements of water in oil can be achieved. Measuring water content in oil is useful for diagnosing oil contamination and degradation, ensuring that the timing for oil replacement is not overlooked.

• Analytical Equipment and Devices

Dew point measurement unit with built-in sampling equipment!

■ Ideal for spot checks ■ Simple operability ■ Choose a dew point meter based on application TK: Built-in TK-100 dew point meter for low dew points TE: Built-in TE-660 dew point meter for medium dew points ■ For measuring furnace atmosphere ■ For measuring chamber atmosphere This product is a portable all-in-one dew point meter equipped with a dew point meter and necessary sampling equipment. It includes a filter, needle valve, flow meter, and pump. The dew point meter features the well-regarded capacitive dew point meter TK-100 or the polymer dew point meter TE-660 manufactured by Techne Measurement Co., Ltd., known for its expertise in furnace dew point management. For applications with a lot of dust, an external pre-filter (optional-PF) is recommended. For more details, please download the catalog.

• Other electronic measuring instruments

Low-cost model for OEM oxygen concentration measurement in ppm/%!

● High value-added OEM model inheriting the concept of the 201RS/2001RS series ● Achieves low price ● Small and compact model ● Adopts self-developed galvanic cell type sensor that is resistant to combustible gases and organic solvents ■ Model 201LC/2001LC utilizes the same front panel and digital electronics as Model 2001RS, functioning as an oxygen analyzer for PPM and percent levels. Like other models, it uses our self-developed AMI galvanic cell type (electrochemical) sensor, excelling in basic performance such as response speed, reproducibility, and lifespan. * Compared to the 201RS/2001RS series, it does not have digital communication functions, but there are no differences in measurement range, accuracy, or response speed. ■ The sensor is a disposable cartridge type, allowing for easy manual replacement of the sensor from the front panel. For more details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

Measurement control panel for various measurements in atmospheric gas!

When measuring the dew point and oxygen concentration in the atmosphere gas inside the furnace, the gas is sampled with a pump, impurities are removed with a filter, and then measurements are taken.

• Other measurement, recording and measuring instruments

The goal is not to introduce AI. We will explain "standardization of manufacturing processes" to eliminate dependency and maximize the effectiveness of AI! While the spread of generative AI is progressing, there is an increasing number of manufacturing companies that say, "We don't know where to apply AI due to the black box nature of the site," and "Despite implementation, productivity hasn't increased." The cause lies not in the performance of AI, but in the "lack of business organization and standardization before implementation." In this webinar, we will clearly explain business improvement methods (BPMS) and how to properly organize business processes to avoid wasting AI investments, using case studies. [Recommended for those who:] - Are struggling to engage the field due to resistance like "busy" or "it's fine as it is." - Want to eliminate differences in rules between factories and locations, as well as dependency and black box issues with veteran employees. - Are being asked to "utilize AI" but don't know where to start due to disorganized business processes. [Here is the application form] https://www.earthlink.co.jp/seminar/10840/ *Pre-registration required (free) *We will give a "partial excerpt of the presentation materials" to those who respond to the survey after viewing.

[Speaker] Ms. Sayako Sumomo, Director, International Equipment Division, Equipment Policy Department, Acquisition, Technology & Logistics Agency [Key Lecture Content] As the security environment surrounding our country changes at an accelerating pace, the government is promoting defense equipment transfers as an important policy measure to create a desirable security environment for our nation. Promoting defense equipment transfers not only enhances regional deterrence and response capabilities for peace and stability in the Indo-Pacific region but also contributes to strengthening our country's defense production and technological base through market expansion and supply chain cooperation. Furthermore, the development of the defense industry and other industries with dual-use technologies can lead to growth in the Japanese economy. In this lecture, I will explain recent trends in defense equipment transfers, taking into account the recent revisions to the equipment transfer system. [Lecture Topics] 1. Japan's Defense Policy 2. Significance and System of Equipment Transfers 3. Recent Trends in Equipment Transfers 4. Government Initiatives 5. Q&A / Business Card Exchange

[Speaker] Hiroki Hara, Country Lead, Cloud & Service Provider Segment, Schneider Electric Holdings Co., Ltd. [Key Lecture Content] In the era of AI, it is essential to redesign not just the equipment but the very way energy is utilized in data centers. This presentation will organize the approach to power architecture aimed at enhancing competitiveness, taking into account global trends and the constraints of the Japanese market. Additionally, through Schneider Electric's comprehensive portfolio, which includes cooling and operations, we will provide perspectives for selecting optimal options in Japan's increasingly complex power environment, as well as hints for future implementations. [Lecture Items] 1. Introduction to Schneider Electric 2. Global megatrends and the external environment surrounding the data center industry 3. Architecture of data center power infrastructure - Design philosophy necessary for safely delivering electricity 4. Schneider's portfolio connecting power and cooling, design, construction, and operation 5. Unique challenges of the Japanese market and options for optimal solutions 6. Q&A / Business card exchange

[Speaker] Yuya Sato, Director, Innovation Management Co., Ltd. [Lecture Topics] 1. Main challenges in the field of research and development 2. Overview of research and development management 3. How to utilize "roadmaps" for formulating persuasive mid- to long-term strategies 4. How to utilize "technology portfolios" to achieve convincing resource allocation 5. "Gate management" to improve the success rate of highly innovative research and development themes 6. Integrated research and development management process 7. Q&A

Our TL Division will be exhibiting at the "Surface Treatment Processing Technology Exhibition 2026" to be held on June 26 (Friday) at the Osaka Industry Creation Center. We invite you to visit our booth to see our products and technologies. We sincerely look forward to your attendance. ■ Exhibition Name Surface Treatment Processing Technology Exhibition 2026 ■ Date June 26, 2026 (Friday) ■ Venue Osaka Industry Creation Center, 3F Market Plaza / 4F Event Hall ■ Exhibited Technology We will introduce optimal solutions for surface modification composites and ultra-hard coating removal by adding a new coating to Y-Coat, which leads the mold market. New Coating: Y-Coat Type UL Product Introduction Page