(Free) Instron WEB Seminar Series: Fatigue Testing Machine Series: Features of Electric Drive Fatigue Testing Machines and Their Application to Biological Materials

Supports testing using a constant temperature bath! Reduces energy consumption by minimizing test time.

WaveMatrix utilizes self-heating control software for test specimens to optimize test frequencies, thereby improving the productivity and consistency of tests related to composite materials and polymer materials. It is possible to reduce test time while achieving unprecedented accuracy in test temperatures. This patented system achieves and maintains the specified test temperature by changing the test frequency according to the measurement temperature of the test specimen. In structural composite materials, the impact of a 5°C temperature change is greater than a change in frequency by a factor of two, making the benefits of strict test temperature control significantly higher than moderate frequency variations. 【Features】 ■ User-defined temperature range (controllable up to ±0.5°C) ■ User-defined frequency range ■ Thermocouple data input via USB is possible ■ Analog input of 0-10V for thermocouple data, including infrared thermometers, is possible ■ Thermocouples can be installed according to the shape of the test specimen *For more details, please refer to the PDF document or feel free to contact us.

• Software (middle, driver, security, etc.)
• Other embedded systems (software and hardware)

E20000 has been newly added! Dynamic fatigue testing machine that adopts linear motor technology, eliminating the need for operating oil, energy-saving, and low noise.

"ElectroPuls" is an electric fatigue testing machine that utilizes linear motor technology (patented) based on approximately 13 years of testing experience. It features a wide performance range capable of conducting static tests as well as dynamic and fatigue tests, making it an ideal system for various laboratories and testing facilities. It can also be used for testing biomaterials and medical devices. In addition to a variety of testing accessories, the new "E20000" can perform both dynamic and static tests with a single unit. We offer a lineup of single-axis models up to 10kN and 100Nm, as well as linear/torsion (dual-axis) options. There are three sizes available, allowing you to choose according to your application. Our product meets your testing needs in a simpler, smarter, and safer way. 【Features】 ■ No hydraulic oil required ■ Energy-efficient ■ Low noise ■ Space-saving ■ No complex and costly maintenance required 【Software Used】 WaveMatrix2 *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

Simultaneous testing of up to 16 specimens is possible! Easy access for specimen insertion, preloading, and adjustment.

The "ElectroPuls 16 Station" is a testing system that significantly shortens testing time and contributes to the rapid market introduction of products. It allows simultaneous testing of tensile, compression, and bending tests with up to 16 specimens. Finished products or individual components, such as NiTi single diamond struts, can be uniformly tested at each station due to easy setup and simple preload adjustments. 【Features】 - The use of inline button-type load cells allows for precise adjustment of specimens close to the testing fixture. - There are no alignment errors in the XY axis during adjustments or preload at each station. - Each individual push rod can be adjusted by ±5mm for easy insertion and adjustment of specimens. - Anyone can accurately apply uniform preload across all 16 stations. - No specialized knowledge is required. *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic linear load capacity ±10kN / dynamic torque capacity ±100Nm! The required floor space for the frame is less than 0.8m².

The E10000 is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring linear-torsion type technology. It is equipped with advanced digital control electronics from Instron, a Dynacell load cell for biaxial testing, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. **Features** - Oil-free linear motor technology that maintains a clean state - Separate linear/rotary actuators - Designed for dynamic and static testing of diverse materials and components - High dynamic performance, capable of operating at up to 100Hz - Operates on single-phase main power, no hydraulic or pneumatic sources required *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic linear load capacity ±3000N / static load capacity ±2100N! The required desk space for the frame is less than 0.3, making it compact.

The "ElectroPuls E3000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It operates on single-phase power and does not require additional utilities (such as compressed air, hydraulic power, or cooling water supply) for basic machine operation. Equipped with advanced digital control electronics, DynacellT load cells, console software, and a new testing technique based on the stiffness of the specimen for hassle-free tuning, it features an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented functions. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Unlockable to allow for rotational freedom of the actuator, providing flexibility in testing ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic linear load capacity ±3000N / dynamic torque capacity ±25Nm! The required desk space for the frame is less than 0.3m².

The E3000 is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring a linear-torsion type design. Equipped with advanced digital control electronics, a Dynacell load cell for two axes, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that allows flexible test configurations, and many other user-oriented features. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. **Features** - Oil-free linear motor technology that maintains a clean state - Separate linear/rotary actuators - Designed for dynamic and static testing of diverse materials and components - High dynamic performance, capable of operating at over 100 Hz - Dynamic linear load capacity: ±3000 N / Dynamic torque capacity: ±25 Nm *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

A variety of hydraulic servo testing systems with different capacities and applications, along with a wide range of applications and fixtures!

This catalog introduces the hydraulic servo fatigue testing systems handled by our company. It features a compact tabletop model "8872 (25 kN)" that meets the high demands of various static and dynamic testing requirements, as well as "8803 (500 kN)" and the controller electronics "8800MT." We also showcase a wealth of applications, so please take a look. 【Featured Products (Excerpt)】 ■ 8872 (25 kN) Fatigue Testing System ■ 8874 (25 kN/100 Nm) Fatigue Testing System ■ 8801 (100 kN) Fatigue Testing System ■ 8862 (100 kN) Low Cycle Fatigue Testing System ■ 8802 (250 kN) Fatigue Testing System *For more details, please refer to the PDF document or feel free to contact us.

• Hydraulic Equipment
• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic load capacity maximum ±10kN / Static load capacity ±7kN! The required floor space for the frame is less than 0.8m², making it compact.

The "ElectroPuls E10000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. Equipped with Instron's advanced digital control electronics, Dynacell load cells, console software, and a new testing technique based on the stiffness of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at up to 100Hz ■ Operates on single-phase main power, no hydraulic or pneumatic sources needed ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic load capacity ±1000N / Static load capacity ±710N! The required desk space for the frame is less than 0.15m².

The "ElectroPuls E1000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It features advanced digital control electronics from Instron, Dynacell load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented functions. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state (patented) ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Dynamic load capacity: ±1000 N / Static load capacity: ±710 N ■ Operates on single-phase main power, no hydraulic or pneumatic sources needed *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

We will be exhibiting at the "Automotive World Nagoya" held at Aichi Sky Expo in Aichi Prefecture. New technologies on cutting-edge themes in the automotive industry, such as autonomous driving, vehicle electrification, connected cars, and lightweighting, will be showcased all in one place. It will be an excellent opportunity for business discussions and technical consultations with automobile manufacturers, auto parts manufacturers, and suppliers from the Chubu and Kinki regions. We sincerely look forward to your visit.

[Instructor] Miki Yoshinobu, President and CEO of Toraizu Co., Ltd. (Former Chief of Staff at SoftBank) [Key Lecture Content] During his time as Chief of Staff at SoftBank, the instructor developed a "super practical project management technique to reach goals in the shortest and fastest way" after being given numerous challenging projects by President Masayoshi Son. "This project management skill is not something that is only necessary for special projects. In today's rapidly changing environment, routine work is fundamentally disappearing. It is becoming essential to continuously reassess everything from a zero-based perspective. In other words, whether it's creating materials requested by a superior or engaging in sales activities, everything has become 'project-like work.' Therefore, in this seminar, we will clearly explain the basics of project management and practical methods for the field."

[Archive Distribution] How to Standardize Black Box Legacy Systems and Field Operations and Transition to a New System Legacy systems that have become black boxes after many years since their introduction. Amid urgent calls for renewal due to the "2025 Cliff" and the "Logistics 2024 Problem," many responsible individuals feel pressure with concerns like "I don't know how to write an RFP," "I'm worried about missing requirements," and "I can't afford to fail." In this seminar, we will thoroughly explain the "steps to create a successful RFP" to lead logistics DX to success. We will specifically discuss the standardization of operations that abandon current practices and data integration strategies. Additionally, we will introduce common pitfalls through actual failure cases. [Recommended for] - Logistics planners, IT system personnel, and DX promotion staff from shipper companies and logistics companies. - Those who are tasked with renewing black box legacy systems and feel pressure, or those who are anxious about "missing requirements" and "vendor selection." - Recommended for those seeking practical insights from writing a correct RFP to standardizing current operations, internal adjustments, and ROI calculation tips. [Speaker] Technology Services Division SI Department Manager Tomoya Mitsuhashi

Global Information, in collaboration with the partner research company Howe Sound Research, will host a free co-sponsored webinar titled "How AI is Transforming the In Vitro Diagnostics (IVD) Market: Technological Innovations and Business Opportunities Driving Growth." ■ Content We will explain the changes brought about by AI in the IVD market and future growth opportunities. We will cover how AI technologies, including machine learning, deep learning, and advanced data analytics, are being utilized across a wide range of diagnostic fields such as clinical chemistry, molecular diagnostics, pathology, genomics, immunoassays, microbiology, and point-of-care testing (POCT). ■ Language Japanese and English *The presentation will be conducted in English (with Japanese subtitles). ■ Speaker Speaker: Greg Powell, President of Howe Sound Research ■ Agenda *The schedule/content below is subject to change. 1. About Howe Sound Research 2. Gradual and significant changes in IVD 3. Perspectives on IVD products 4. The impact of AI 5. Present and future 6. New approaches to R&D 7. Summary

This seminar will provide a detailed explanation of how to integrate data between Salesforce and other systems. There are three methods for data integration with Salesforce: the "Data Loader," which is provided free of charge by Salesforce, the "Web API" developed individually, and the highly extensible "Data Integration Tools (EAI Tools)." We will compare the advantages and disadvantages of each method and provide tips for finding the most suitable integration method for your company's needs, incorporating actual case studies. <Recommended for> - Those who are struggling with data integration between Salesforce and core systems - Those who find that the burden on the field is a challenge, hindering the utilization of Salesforce - Those who want to easily integrate data with peripheral systems