(Free) Instron WEB Seminar Series: Fatigue Testing Machine Series: Features of Electric Drive Fatigue Testing Machines and Their Application to Biological Materials

Supports testing using a constant temperature bath! Reduces energy consumption by minimizing test time.

WaveMatrix utilizes self-heating control software for test specimens to optimize test frequencies, thereby improving the productivity and consistency of tests related to composite materials and polymer materials. It is possible to reduce test time while achieving unprecedented accuracy in test temperatures. This patented system achieves and maintains the specified test temperature by changing the test frequency according to the measurement temperature of the test specimen. In structural composite materials, the impact of a 5°C temperature change is greater than a change in frequency by a factor of two, making the benefits of strict test temperature control significantly higher than moderate frequency variations. 【Features】 ■ User-defined temperature range (controllable up to ±0.5°C) ■ User-defined frequency range ■ Thermocouple data input via USB is possible ■ Analog input of 0-10V for thermocouple data, including infrared thermometers, is possible ■ Thermocouples can be installed according to the shape of the test specimen *For more details, please refer to the PDF document or feel free to contact us.

• Software (middle, driver, security, etc.)
• Other embedded systems (software and hardware)

E20000 has been newly added! Dynamic fatigue testing machine that adopts linear motor technology, eliminating the need for operating oil, energy-saving, and low noise.

"ElectroPuls" is an electric fatigue testing machine that utilizes linear motor technology (patented) based on approximately 13 years of testing experience. It features a wide performance range capable of conducting static tests as well as dynamic and fatigue tests, making it an ideal system for various laboratories and testing facilities. It can also be used for testing biomaterials and medical devices. In addition to a variety of testing accessories, the new "E20000" can perform both dynamic and static tests with a single unit. We offer a lineup of single-axis models up to 10kN and 100Nm, as well as linear/torsion (dual-axis) options. There are three sizes available, allowing you to choose according to your application. Our product meets your testing needs in a simpler, smarter, and safer way. 【Features】 ■ No hydraulic oil required ■ Energy-efficient ■ Low noise ■ Space-saving ■ No complex and costly maintenance required 【Software Used】 WaveMatrix2 *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

Simultaneous testing of up to 16 specimens is possible! Easy access for specimen insertion, preloading, and adjustment.

The "ElectroPuls 16 Station" is a testing system that significantly shortens testing time and contributes to the rapid market introduction of products. It allows simultaneous testing of tensile, compression, and bending tests with up to 16 specimens. Finished products or individual components, such as NiTi single diamond struts, can be uniformly tested at each station due to easy setup and simple preload adjustments. 【Features】 - The use of inline button-type load cells allows for precise adjustment of specimens close to the testing fixture. - There are no alignment errors in the XY axis during adjustments or preload at each station. - Each individual push rod can be adjusted by ±5mm for easy insertion and adjustment of specimens. - Anyone can accurately apply uniform preload across all 16 stations. - No specialized knowledge is required. *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic linear load capacity ±10kN / dynamic torque capacity ±100Nm! The required floor space for the frame is less than 0.8m².

The E10000 is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring linear-torsion type technology. It is equipped with advanced digital control electronics from Instron, a Dynacell load cell for biaxial testing, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. **Features** - Oil-free linear motor technology that maintains a clean state - Separate linear/rotary actuators - Designed for dynamic and static testing of diverse materials and components - High dynamic performance, capable of operating at up to 100Hz - Operates on single-phase main power, no hydraulic or pneumatic sources required *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic linear load capacity ±3000N / static load capacity ±2100N! The required desk space for the frame is less than 0.3, making it compact.

The "ElectroPuls E3000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It operates on single-phase power and does not require additional utilities (such as compressed air, hydraulic power, or cooling water supply) for basic machine operation. Equipped with advanced digital control electronics, DynacellT load cells, console software, and a new testing technique based on the stiffness of the specimen for hassle-free tuning, it features an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented functions. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Unlockable to allow for rotational freedom of the actuator, providing flexibility in testing ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic linear load capacity ±3000N / dynamic torque capacity ±25Nm! The required desk space for the frame is less than 0.3m².

The E3000 is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring a linear-torsion type design. Equipped with advanced digital control electronics, a Dynacell load cell for two axes, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that allows flexible test configurations, and many other user-oriented features. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. **Features** - Oil-free linear motor technology that maintains a clean state - Separate linear/rotary actuators - Designed for dynamic and static testing of diverse materials and components - High dynamic performance, capable of operating at over 100 Hz - Dynamic linear load capacity: ±3000 N / Dynamic torque capacity: ±25 Nm *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

A variety of hydraulic servo testing systems with different capacities and applications, along with a wide range of applications and fixtures!

This catalog introduces the hydraulic servo fatigue testing systems handled by our company. It features a compact tabletop model "8872 (25 kN)" that meets the high demands of various static and dynamic testing requirements, as well as "8803 (500 kN)" and the controller electronics "8800MT." We also showcase a wealth of applications, so please take a look. 【Featured Products (Excerpt)】 ■ 8872 (25 kN) Fatigue Testing System ■ 8874 (25 kN/100 Nm) Fatigue Testing System ■ 8801 (100 kN) Fatigue Testing System ■ 8862 (100 kN) Low Cycle Fatigue Testing System ■ 8802 (250 kN) Fatigue Testing System *For more details, please refer to the PDF document or feel free to contact us.

• Hydraulic Equipment
• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic load capacity maximum ±10kN / Static load capacity ±7kN! The required floor space for the frame is less than 0.8m², making it compact.

The "ElectroPuls E10000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. Equipped with Instron's advanced digital control electronics, Dynacell load cells, console software, and a new testing technique based on the stiffness of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at up to 100Hz ■ Operates on single-phase main power, no hydraulic or pneumatic sources needed ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic load capacity ±1000N / Static load capacity ±710N! The required desk space for the frame is less than 0.15m².

The "ElectroPuls E1000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It features advanced digital control electronics from Instron, Dynacell load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented functions. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state (patented) ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Dynamic load capacity: ±1000 N / Static load capacity: ±710 N ■ Operates on single-phase main power, no hydraulic or pneumatic sources needed *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Nitto Kohki will exhibit at the "H₂ & FC EXPO Spring International Hydrogen and Fuel Cell Exhibition" held at Tokyo Big Sight, West Exhibition Hall 2, from February 28 (Wednesday) to March 1 (Friday), 2024. [Booth Number: W14-63] The quick fluid coupling "Coupler" is a product that allows for the rapid connection and disconnection of piping for various fluids such as air, water, oil, and chemical solutions. At this exhibition, we will primarily showcase the high-pressure hydrogen filling quick fluid coupling "HHV Coupler."

Nitto Kohki will hold the "2025 Attack Fair in Meiko" for two days from July 23 (Wednesday) to July 24 (Thursday), 2025, at the "Kowa Seminar Plaza 2F Training Room NO.12 (inside Kowa Sports Land)." The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful souvenirs for attendees and many fun activities planned. We look forward to welcoming everyone!

Recently, a variety of ceramic 3D printers have been rapidly introduced to the market, enabling the creation of complex shapes that were previously impossible, as well as hollow, porous, and lattice structures. This has led to the innovative production of ceramic parts, short-term, low-cost, high-quality manufacturing, a significant reduction in the number of parts, and a substantial decrease in production processes and workforce. On the other hand, Canon has developed a new high-performance ceramic material that excels in selective laser melting, which minimizes "shrinkage" during firing, utilizing metal 3D printers. In June of last year, Canon and the Metal Research Institute collaborated to officially launch a contract manufacturing service for high-precision, complex-shaped ceramic parts using Canon's innovative ceramic materials and 3D Systems' metal 3D printers. In this seminar, we will explain the development trends of Canon's ceramic materials compatible with metal 3D printers, the molding technology using these materials, the characteristics of the parts that can be molded, the physical properties and features of the molded products, target areas, collaboration with the Metal Research Institute, and future developments in material development. [If you apply now, the course fee is half price (9,500 yen)] When applying, please write "Other [9,500 yen]" in the "Other" section above the application form on our website.

Next-generation large and high-speed metal 3D printers that offer short production times, low costs, and high precision are being rapidly introduced to the market, leading to increased adoption and utilization. In the first session of this seminar, we will discuss the short production technology and case studies of Fuji High Frequency Industry, which has introduced a large metal 3D printer from Meltio, as well as examples of cost reduction and material savings through topology optimization. The second session will cover the overview of the Farsoon LPBF method large and high-speed metal 3D printer, which can produce up to 1500mm, along with its short production time, low cost, and high-quality manufacturing technology, as well as public production case studies. The third session will present applicable cases at JFE Engineering, which has seen a surge in requests for manufacturing from various fields after introducing a large metal 3D printer from Nidec Machine Tool, including publicly available marine and rocket engine parts, plant equipment parts, as well as applications in parts and mold repair and reverse engineering. The fourth session will provide a detailed explanation of the latest manufacturing technology and case studies from Sanko Gosei, which has introduced a large hybrid metal 3D printer from Matsuura Machinery to produce high-functionality and high-quality diverse large resin mold parts. [If you apply now, the course fee will be half price (9,500 yen)] When applying, please write "Other [9,500 yen]" in the "Other" section above the application form on our website.

[Lecture Topics] 1. Understanding SpaceX's Hardware through Patent Information - How Did They Overcome the Barriers to Mass Production? Takao Inoue, Director and Patent Attorney, AIPE Certified Senior Intellectual Property Analyst (Patents) 2. Mapping the Power Dynamics of New Space and Key Areas of Research and Development through Patent Information Kento Kawase, President, AIPE Certified Intellectual Property Analyst (Patents) Q&A / Business Card Exchange