Interfex Japan

Measure the distortion transmission speed and detect the liquid level! An absolute level meter boasting high resolution.

This product is a level meter that applies the magnetostriction phenomenon based on the Wiedemann effect. A magnet inside a float that moves along the stem generates "twisting strain" on the magnetostrictive wire, and by measuring the propagation speed of that strain, the liquid level is detected. In addition, we offer the magnetostrictive level meter "EX-GYds" with IEC-compliant explosion-proof structure. 【Features】 ■ Applies the magnetostriction phenomenon based on the Wiedemann effect ■ Detects liquid level by measuring the propagation speed of strain ■ Converts the absolute position of the magnet into an analog output ■ IEC-compliant explosion-proof structure (EX-GYds) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

If you have any concerns about liquid level measurement, please consult with us! We will solve your problems with the KF300 series!

The KF-300 series is a vertical float switch for liquid measurement. It has a simple structure that makes it easy to handle. Additionally, since it uses a reed switch, it can also withstand humidity, gas, and dust. We offer a variety of materials and float sizes to accommodate different liquids. Furthermore, while it is a point measurement level switch, it can detect multiple points by increasing the number of reed switches. We can also accommodate challenging usage conditions with options such as a wave-damping tube, relay joint specifications, and ribbed floats, so please feel free to consult us. For more details about the product, please refer to the attached PDF.

• Electrical Instruments/Electrometers
• Level gauges and level switches
• Other measurement, recording and measuring instruments

Custom-made delivery performance No. 1 in Japan! "Capacitive Level Switch ALN/ST Type"

This is a capacitive level switch that can be used for various applications with over 1,000 types of electrode shapes and special circuits. It reliably detects even in the following situations: 1. For measurement objects with electrode adhesion or deposits, unique correction functions ensure that adhesion and deposits are not detected. 2. For use in areas with severe vibrations, it is equipped with amplification separation and vibration-resistant measures. 3. For corrosive measurement objects, Teflon-coated electrodes can be used (depending on the measurement conditions). 4. There are no issues with installing multiple units in the same tank (however, if the installation spacing is short, interference countermeasures are required). 5. If you want to detect interfaces, it can be adapted by referring to the relative permittivity of the two liquids, provided the conditions are met. 6. For use in areas with significant temperature differences, there is a condensation prevention specification (indoor use only, with air holes). 7. If you want to confirm ON/OFF without going to the site, there is a version with a visible operation indicator light. 8. If chattering causes frequent ON/OFF repetitions, the ALN type comes standard with an ON delay function (an OFF delay option is also available). If you have any other concerns, please feel free to consult us, and we will help you select the appropriate model for your use.

• Level gauges and level switches

Ideal for small tanks! A lineup of floats suitable for single-point measurement, multi-point measurement, and various other applications!

With a simple structure, it is easy to handle, has few failures, and boasts a long lifespan. It is available in a wide range of models to finely accommodate various environments. Starting with single-point measurement types made of stainless steel and polypropylene, we also offer multi-point types with and without terminal boxes, so please use them according to your needs. 【Features】 ■ Suitable for small tanks ■ Easy to handle with a simple structure ■ Few failures and long lifespan ■ A rich variety of models including horizontal mounting, side mounting, and heat-resistant types ■ Finely accommodates diverse environments *For more details, please refer to the PDF materials or feel free to contact us.

• Level gauges and level switches

Lightweight, compact, and highly sensitive - a small vibration-type level switch that has it all!

The KVX and XV2 models are compact, small vibrating level switches that pursue ease of use while maintaining the performance of our vibrating level switch KVK model. - Despite their small size, they can stably detect low-density powders with a specific gravity of 0.1 or higher (optional 0.03 or higher), making them suitable for use with resin pellets, powders, flakes, and more! - The installation sizes are also small diameter. The KVX model is for R1 installation type, and the XV2 model is for R(G) 3/4 installation type. Flange and hygienic installation options are also available! - No initial adjustment is required. Just like the KVK model, measurement starts immediately upon powering on! - There is no influence from changes in the physical properties of the measured substance, such as dielectric constant! Options for vibrating rod with mountain shape and vibrating pulse specifications are also available! - Amplified separation types that are effective for tanks with vibrations, such as knockers, can also be manufactured! - If there is adhesion on the detection rod, the optional pulse transmission specification is recommended! *For more details, please refer to the PDF document or feel free to contact us.

• Level gauges and level switches

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

Yazaki Energy System will be exhibiting at the "14th Agricultural WEEK (commonly known as J-AGRI)" held at Makuhari Messe. In response to challenges surrounding agriculture, such as record heat and soaring energy prices, our company proposes an agricultural system that utilizes surplus solar heat and waste heat from factories during the summer to support stable cultivation throughout the year, from winter heating to summer cooling. ■ Exhibition Details (Booth Number: 25-47) <Closed-type Agricultural House> Results from the second season and initiatives for the third season <Localized Cooling in Solar-Powered Agricultural Houses> Mechanism of substrate cooling, comparison of energy consumption with spatial cooling, growth conditions this summer <Cooling and Heating with Solar Heat> Examples of crown heating and house cooling, utilization of surplus heat in summer <Cooling of Crops and Workers with Well Water> Exhibition of a prototype well water cooler and proposals for the use of cooling jackets When you visit, please be sure to stop by our booth.

We would like to inform you about the autumn and winter internship opportunities for the 2028 graduates. 1. Open Company Dates: October 23, 2026 (Friday), November 11, 2026 (Wednesday), December 10, 2026 (Thursday), January 21, 2027 (Thursday) Time: 13:30 - 15:30 Location: Online (Microsoft Teams) 2. 1-Day Job Experience Dates: November 17, 2026 (Tuesday), December 16, 2026 (Wednesday) January 15, 2027 (Friday), January 27, 2027 (Wednesday), February 4, 2027 (Thursday), February 10, 2027 (Wednesday), February 18, 2027 (Thursday) Time: 10:00 - 17:30 (tentative) Location: Takaya Corporation Headquarters (661-1 Ibara-cho, Ibara City, Okayama Prefecture)

Notice of participation in the "FOOD Expo 2026." 【Date and Time】 　November 11 (Wednesday) - 13 (Friday), 2026 　Opening hours: 10:00 AM - 5:00 PM 【Venue】 　Tokyo Big Sight 　East Hall 2, Booth Number B-36 【Exhibits】 　Cardboard insulated boxes 　Craft cooler cubes 　Vacuum insulated panel 　Pallet cubes

[Lecture Topics] 1. Co-creation Strategy to Deliver AI to the Field - Business Development and Joint Ventures in the Era of Generative AI and Physical AI Mr. Haruto Suzuki, Industrial and Regional Research Department, Development Bank of Japan 1. The Mechanism of Generative AI and Its Current Utilization by Companies 2. Expansion of the Generative AI Market and AI Infrastructure 3. Transition from Generative AI to Physical AI 4. Bottlenecks in Social Implementation and Solutions through Joint Ventures 5. Formation of an Implementation Ecosystem through Policy and Finance 6. Q&A / Business Card Exchange 2. Needs, Development Trends, Future Possibilities, and Challenges of Physical AI Mr. Kazushi Asama, Senior Researcher, Next-Generation Robot Research Organization, Waseda University / Emeritus Professor, University of Tokyo 1. What Physical AI Means 2. Needs for Physical AI and the Technological Trends of Generative AI Behind It 3. Development Trends of Physical AI 4. Future Possibilities and Challenges of Physical AI 5. Q&A / Business Card Exchange