Contributes to CO2 reduction, reduction of COD and normal hexane, removal/suppression of scale and rust, suppression of electric decoration, improvement of work environment, and cost reduction.

This is the usage application of the G-Eco series environmentally friendly cleaning agents by production process. It aims to improve the functionality, performance, quality, and reliability of products through cleaning.

【Press】 - Cleaning during press mold maintenance - Addition to cooling water 【Body Assembly】 - Offline cleaning of welding machine cooling circuit - Addition to circulating water of water-cooled control panel cooler 【Painting】 - Offline cleaning of air conditioning heat exchanger - Addition to warm water for rough cleaning before degreasing - Antistatic treatment before painting resin products 【Resin Molding & Painting】 - Water cleaning of mold cooling circuit 【Casting】 - Cleaning of low-pressure casting and die casting cooling circuit, addition to chiller (cooling water circulation device) - Mold cleaning (both external and cooling circuit) 【Forging & Sintering】 - Cleaning of cooling circuit for cold forging molds - Addition to wet blast water before painting forged products (rust prevention) 【Heat Treatment】 - Cleaning of cooling circuit 【Machining & Assembly】 - Addition to cutting and grinding coolant - Addition to cleaning solution before welding, before painting, and after assembly - Addition to high-frequency hardening (IH) cooling water - Various ultrasonic cleaning such as tool cleaning Cleaning + Anti-fouling, re-adhesion prevention, rust prevention, gloss restoration, antistatic, biodegradable, sterilization, deodorization + Eco-friendly

• Cleaning agents

For equipment maintenance and removal of grease from parts! A cleaning agent that removes oil and dirt from inside and outside buildings without damaging materials and without harming plants, animals, or the environment.

Degreasing cleaning can be performed on cutting processing coolants (cutting oils), machine oils, and CVT oils. It reduces the risk of rusting metal by removing oil stains while protecting the metal. It can be used in conjunction with various cleaning machines such as parts washers (cleaning machines, high-pressure washers, bubbling, ultrasonic, power washers), and floor cleaning machines. You can utilize its features in various applications including floor cleaning, parts cleaning, various types of cleaning, and pre-cleaning for painting and plating, among others. It removes oil and dirt without harming or damaging the material, from kitchen grease to industrial oil stains in factories. The main ingredient, sodium hydroxide, is designed for safe and secure use. As an industrial/industrial cleaning agent that considers workers, materials, living organisms, and the environment, it offers high safety and environmental friendliness, making management and use easier, leading to increased productivity. 【Application Examples】 It can be used for equipment maintenance, degreasing cleaning, parts cleaning, surface treatment degreasing, floor cleaning, in manufacturing plants, maintenance shops, gas stations, restaurants, and more, from kitchen grease to industrial oil in factories. *For more details, please download the catalog or feel free to contact us.

• Cleaning agents

We provide total environmental production, including eco-friendly cleaning agents and anti-mold agents!

At House Stage Co., Ltd., Global Ecology Environmental Division, we plan, sell, and construct environmentally related products and environmentally friendly special cleaning methods. We aim to contribute to environmental progress in creating a sustainable society, as unanimously adopted by the United Nations General Assembly through the SDGs. By creating a better environment, we contribute to a sustainable society. 【Business Contents】 ■ Planning, sales, and construction of environmentally friendly products such as cleaning agents, anti-mold and antibacterial agents, coatings, and deodorants. ■ Planning, sales, and construction of the environmentally friendly special cleaning method G-Eco. *For more details, please refer to the PDF document or feel free to contact us.

• Cleaning agents

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

There are times when people think, "A wooden mat is weak against rain, isn't it?" The Hyper CLT mat is a lightweight wooden mat that utilizes wood CLT and is used even at civil engineering sites during rainy weather. By laying it down in temporary roads, access routes, heavy machinery work yards, and material storage areas, it helps reduce the area where vehicles and heavy machinery run directly on muddy ground, ensuring smooth movement on site. The 5×10 panel weighs about 230 kg, making it relatively lightweight and easy to install, remove, or relocate according to weather conditions and construction progress. Of course, it is important to check site conditions such as ground stability, slope, mud, slipping, and shifting during rainy weather. The Hyper CLT mat is a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." As a lightweight wooden mat that combines wood, NETIS, civil engineering, and CLT, it offers a new option to support the ground at the site even on rainy days.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in a single molding process. This allows for the verification of multiple types in a short period.