International Welding Show 2022

A 3D welding table that reduces welding distortion and enhances the quality and efficiency of welding work. A clamp system that offers strong fixation and flexible handling with simple operation.

The most notable feature of Siegmund's 3D welding table (3D fixture) is undoubtedly its durability. It is designed to withstand the harsh conditions of welding work, where various damages such as heat, scratches, and corrosion are expected, and it boasts an astonishing durability against all these types of damage. With the 3D welding table, you can accurately secure workpieces of any shape using a grid arranged in a vertical and horizontal checkerboard pattern, along with clamps that allow for adjustments in height and angle, enabling welding with minimized distortion. By replacing the welding work that was previously done using dedicated welding jigs with the 3D welding table, there is no longer a need to manufacture and own welding jigs for each workpiece, contributing to cost reduction and streamlining the jig storage area in the factory. **Features** - Strong durability against impact - Rust-resistant surface - Difficulty for welding spatter to adhere There are over 3,000 products available for the 3D welding table that can accommodate various welding scenarios, including: - For welding robots - Mobile, elevating, and rotating types - For super-large workpieces, etc. For more details, please contact us or download the catalog.

• Inspection fixture

In addition to measures against welding fumes, grinding dust is also simultaneously extracted! This improves the welding site and factory environment, protecting the health of workers.

The welding fume-compatible grinder dust collector "Spot Duster GW" is a dust collector designed for grinders that incorporates a high-performance filter specifically for welding fume applications. It captures 99% of inhalable dust particles (respirable particles) ranging from 0.3 to 5.0μm, which are subject to measurement in welding fume work environments. It safely collects sparks and dust generated by the grinder. The air-assisted filter cleaning allows operators to easily clean the filter without touching it. 【Features】 ■ Unique extinguishing mechanism ■ Dust removal pulse mechanism ■ Standard LED lighting for grinder operations ■ Built-in high-performance filter ■ Power supply: 200V ■ Captures 99% of inhalable dust particles (respirable particles) including welding fume in the range of 0.3 to 5.0μm *For more details about the welding fume-compatible grinder dust collector, please refer to the PDF document or feel free to contact us.

• Dust collector

Large air purifier compatible with welding fumes. No ductwork required, allowing for flexible layout. Efficiently captures welding fumes and cleans the air in the factory!

Humein is a large industrial air purifier designed for welding fume applications. Model: BPFCA-100, BPFCH-100 ■ No ductwork required Easy to install and move without the need for ductwork. It can accommodate flexible layouts. This single unit can capture 99% of inhalable dust, including welding fumes, in a large factory area of 101.2 m², keeping the air clean within the factory. ■ Indoor circulation type contributes to energy saving and decarbonization Additionally, as it is an indoor circulation type, it does not release pollutants outdoors, resulting in no environmental burden and maintaining heating and cooling efficiency. In factories using air conditioning, it can contribute to energy savings and decarbonization by improving heating and cooling efficiency. 【Features】 ■ No ductwork required ■ Suitable for welding fumes ■ Indoor circulation type ■ High maintainability ■ Maintains the air environment of the entire factory *For more details, please refer to the PDF document or feel free to contact us.

• Other air conditioning equipment

A deburring machine designed for sheet metal workers, pursued by sheet metal workers! For those considering improving efficiency from manual deburring tasks!

Deburring, edge rounding, and R-shaped finishing for plate-shaped workpieces! Removal of dross, slag, and oxide films through laser processing! Dramatically improve the efficiency of manual deburring! In an era where safety is demanded in work processes and products, injuries caused by burrs must not occur. Additionally, products with burrs decrease work efficiency in the manufacturing process and lower the value of the products themselves. Burrs should be nonexistent... And we want to remove burrs without damaging the surface. We propose this to sheet metal workers looking to improve efficiency from manual deburring tasks! 【Features】 ■ The rotating polishing brush strikes the burrs, preventing the occurrence of secondary burrs. ■ Multi-directional polishing allows for even deburring of the vertical and horizontal edges of the workpiece. ■ Not only can flat materials be deburred, but also bent shapes and three-dimensional workpieces. ■ Dust is suctioned from the deburring chamber and collected by a dust collector. ■ The built-in blower for workpiece adhesion creates a space-saving structure. *For more details, please request materials or view the PDF data from the download. We also accept test processing for those considering implementation.

• Other processing machines

Is something like this happening in your workplace? ■ Suddenly, equipment stops ■ Small troubles and short-term stoppages occur repeatedly, and yield loss does not decrease ■ "Something just feels off..." but the cause cannot be identified You might be missing the SOS signals from your equipment. Equipment is like a "baby." Instead of expressing itself in words, it signals trouble through subtle changes such as "sounds," "smells," "vibrations," and "heat." To notice these changes, it is essential to cultivate the ability to "sense slight changes" through routine maintenance. By performing tasks like refueling, cleaning, and inspection ourselves, we can catch abnormalities in the equipment early and prevent major breakdowns. Just 5 minutes of maintenance a day can become the greatest weapon for "producing goods according to the production plan." We will proceed with a workshop included. *For more details, please download the PDF or contact us.

Today, the manufacturing site is facing a labor shortage. Therefore, it cannot function without part-time workers, temporary employees, and foreign workers. This issue is not limited to the manufacturing sector. The key lies in how to educate these individuals in a short period of time so that they can perform actual tasks efficiently and smoothly to produce quality products. In this seminar, participants will learn effective teaching methods and improve their skills as instructors. This will enable on-site workers to perform tasks using standardized procedures, significantly enhancing quality and productivity. Even newcomers or foreign employees can become immediate assets in a short time. By honing the "ability to teach," we will create a system that ensures workers adhere to established procedures and do not revert to previous methods. *For more details, please download the PDF or contact us.*

A specialized exhibition showcasing the latest technologies and solutions such as IoT solutions, AI, and FA/robots to realize smart factories and smart logistics. It serves as a venue for business discussions and technical consultations between manufacturing industry professionals involved in manufacturing and production technology, factory and logistics personnel, and exhibiting companies. Our company will be exhibiting and demonstrating eye-tracking glasses.

In this seminar, we will introduce "Platio Connect," which allows for easy no-code implementation of everything from creating mobile applications to data integration with internal systems and automation of data utilization tasks. We will also share demos and case studies of companies that have successfully improved their operational efficiency. If you want to effectively utilize on-site data as internal assets, leverage internal data on-site, or are interested in promoting DX (digital transformation) in the field, please be sure to watch.

In this seminar, we will introduce "Platio Connect," which allows you to easily create mobile applications and achieve data integration with internal systems and automation of data utilization tasks without coding. We will also share demos and case studies of companies that have successfully improved their operational efficiency. If you want to effectively utilize on-site data as internal assets, or if you want to leverage internal data on-site, or if you are interested in promoting DX in the field, please be sure to watch.