We will hold the Japan Kistler Cutting Processing Technology Seminar 2022!

A general-purpose data acquisition system for controlling interfaces and charge amplifiers!

This DAQ system is versatile and serves as a data acquisition system for controlling interfaces and charge amplifiers. It is suitable for force measurement using single-component or multi-component force sensors, in addition to cutting power meters. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Easy installation using USB 2.0 port • Remote control of charge amplifiers • Powerful data acquisition system • High sampling rate • Trigger function

• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

Measure the three orthogonal components of force, enabling the measurement of extremely small forces with high resolution and high sensitivity!

The multi-component small power meter model 9119AA1 measures three orthogonal components of force and enables the measurement of extremely small forces due to its high resolution and sensitivity. ◇ Measurement range: ±4kN, Top plate: 39x80mm (9119AA1) / 55x80mm (9119AA2) －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Compact design • High sensitivity and natural frequency • Minimal temperature influence • Titanium top plate • Cutting force measurement in ultra-precision machining • Multi-component force measurement

• Other measurement, recording and measuring instruments

Measuring the three orthogonal components of force plus torque. Due to high rigidity and natural frequency, as well as excellent resolution, it is possible to measure even slight dynamic changes in large forces and torques!

This 4-component dynamometer can measure the orthogonal three components of torque and force generated around the axis of the dynamometer. It features a high-rigidity structure with a high natural frequency. Additionally, due to its high resolution, it can measure even slight dynamic changes in large forces or torques. ◇ Measurement range: ±5kN/±200Nm, Top plate: Φ100 －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ ・Compact, robust multi-component force measurement device ・Versatile ・For measuring cutting forces and grinding forces during drilling, milling, turning, and grinding operations.

• Torque Meter
• Other measurement, recording and measuring instruments

Minimizing the impact of temperature through a special arrangement method. Achieving high-quality measurements of dynamic processes in machining and force measurement!

The multi-component dynamometer model 9139AA measures three orthogonal components of force. Its robust and high-rigidity design allows for a wide measurement range, making it capable of high-load measurements. ◇ Measurement range: ±30kN, Top plate: 140x190mm －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Wide measurement range • Temperature compensation design (patented) • Compact and sturdy design • High natural frequency

• Other measurement, recording and measuring instruments

Sensors for data collection that support optimal processing conditions are active in a wide range of applications!

A fixed cutting dynamometer capable of calculating three-component forces and three-component moments during cutting and grinding processes. Its compact design and large measurement range make it suitable for installation in spaces with limited room. ◇ Measurement range: ±10kN, Top plate: 90x105mm －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ ・ Compact design ・ Large measurement range ・ Minimal temperature influence ・ Ideal for cutting force measurement ・ Suitable for multi-component measurement

• Other measurement, recording and measuring instruments

Due to its high rigidity and natural frequency, as well as excellent resolution, it is possible to measure even the dynamic changes of very small forces while a large force is being applied!

This quartz piezoelectric three-component dynamometer can measure the three orthogonal components of force. It features a high-stiffness structure with a high natural frequency. Additionally, due to its high resolution, it can measure even slight dynamic changes in large forces. ◇ Measurement range: -10 to 60 kN, Top plate: 260x260 mm －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Wide measurement range • Suitable for high-durability applications

• Other measurement, recording and measuring instruments

Due to its very high rigidity and natural frequency, as well as excellent resolution, it is possible to measure even the dynamic changes of very small forces while a large force is acting!

A fixed cutting dynamometer that can measure orthogonal three-component forces during cutting and grinding processes. It is ideal for optimizing cutting conditions and monitoring cutting states. Despite its wide measurement range (Fx, Fy, Fz: ±5 kN), it has excellent dynamic resolution (0.01 N), allowing for the measurement of very small dynamic changes in force even when large forces are acting. ◇ Measurement range: ±5 kN, top plate: 100x170 mm

• Other measurement, recording and measuring instruments

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.