[New Product] Launch of "AT-AR4000S-Cloud" providing secure connections in the cloud. With the addition of virtual appliance products, it flexibly accommodates new ways of working.

Next-generation firewall-equipped, high-performance secure VPN access router for medium to large-scale networks.

The AT-AR3050S/AT-AR4050S is a next-generation VPN router and security gateway equipped with a DPI engine and various security engines, supporting NGN connections. It prevents external attacks and information leaks using advanced anti-virus engines and IP address/URL blacklists, while securely connecting sites through a robust encryption algorithm via VPN. It can also be used as an integrated appliance featuring AMF for centralized management and automatic recovery of network devices, AMF-WAN (SD-WAN) for efficient management and operation of WAN connections, AMF-SEC (SD-LAN) for ensuring security across the entire network, and a wireless LAN controller AWC for maintaining a comfortable wireless LAN environment. *For more details, please refer to the related links or feel free to contact us.*

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• Firewall and intrusion prevention

Multi-carrier (SIM-free) 5G/4G LTE communication compatible with dual SIM slots, next-generation VPN access router.

The AT-AR4050S-5G is a next-generation VPN access router that incorporates a 5G communication module compatible with multi-carrier (SIM-free) 5G/4G LTE communication. The SIM card slot and the standard antenna support both 5G and 4G LTE, providing an optimal network environment based on the area and communication conditions. With dual SIM slot support that allows for simultaneous insertion of two SIM cards, it is possible to operate with active standby on mobile communication lines. The AT-AR4050S-5G enables easy network setup in locations where fixed lines are difficult to install or when temporary network construction is needed. *For more details, please refer to the related links or feel free to contact us.*

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• Firewall and intrusion prevention

High-speed, large-capacity connectivity compatible with a wide range of applications from edge to distribution! Gigabit Intelligent Stackable Switch.

The CentreCOM x530L series is a switch equipped with Gigabit interfaces and 10G uplinks, available in both Non-PoE+ and PoE+ models. ■ Provides 10G high-speed and large-capacity connections All four SFP/SFP+ slots can be used as 10G uplinks. It also supports VCS, which allows multiple switches to be virtually combined into a single switch, enabling the expansion of multi-gigabit interfaces through mixed stacking configurations with the x530 series. ■ Availability and scalability to meet various requirements It supports IPv4 static, RIP, and OSPF routing as standard, with the option to add features such as IPv6 dynamic routing through licensing. Additionally, it achieves redundancy with two built-in power supplies and a high PoE power supply capability of 740W per chassis (PoE+ model only). ■ Supports network autonomous optimization It is compatible with AMF, promoting the simplification and efficiency of designing, building, operating, and managing increasingly diversified and complex networks as an AMF member. *For more details, please refer to the related links or feel free to contact us.*

• Communications
• Routers, Switches, and Hubs

Achieve high-speed networking at low cost! An intelligent edge switch with PoE+ and PoE++ models also available.

The GS980MX series is a Layer 3 intelligent edge switch equipped with a 10G uplink, offering Non-PoE, PoE+, and PoE++ models. - The PoE+ and PoE++ models feature multi-gigabit ports compatible with 2.5/5GBASE-T. This allows for the establishment of a high-speed network that can accommodate increased traffic at a low cost without the need for rewiring. - The PoE++ model supports high-capacity power supply of up to 90W, making it an ideal choice for connecting to Wi-Fi 6 compatible wireless LAN access points. - The SFP/SFP+ slots enable high-speed, high-capacity communication with upper-level switches as 10G uplink ports. - It supports VCS (Virtual Chassis Stack), which reduces operational management costs through stacked connections. - It is compatible with AMF, simplifying and enhancing the design, construction, and operational management of the network as an AMF member, and it also allows for the implementation of AMF-SEC for endpoint security. *For more details, please refer to the related links or feel free to contact us.*

• Routers, Switches, and Hubs

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.