We will be showcasing the newly released ultraviolet sterilization device "UV Clear" at the "6th Comprehensive Exhibition on Infectious Disease Control." This is a chance to see the actual device. We hope you will visit us.

Finally here! A new UV sterilizer "UV Clear" that disinfects both air and surfaces, serving dual purposes in one device [Released in June 2022].

UV Kurea is a new ultraviolet sterilizer that combines "air sterilization," which circulates air to keep the room's air clean, and "surface sterilization," which directly irradiates ultraviolet light to sterilize objects and air in an instant. ● The burden of daily sterilization tasks is overwhelmingly reduced. ● "Surface Sterilization Mode" Sterilizes both a wide area of air and surfaces in a short time. ● "Air Sterilization Mode" Continuously operates to keep the room's air clean. ● Equipped with a human sensor and operation timer for a safe design. ● Available in a variety of color options. UV Kurea provides clean air and peace of mind for customers, employees, and families. *Please note that the appearance and specifications may change from the content published in this article as it is currently under development.

• others

A lighting device that sterilizes viruses and bacteria in all directions using the power of ultraviolet light. It is also easy to carry. Please use it for infection control, disinfection, and to shorten sterilization work time.

With six features, it easily and safely sterilizes indoor spaces with high efficiency using ultraviolet light. 1) Powerful Sterilization Utilizing the most powerful ultraviolet light (UVC) for inactivating viruses and bacteria, it offers strong sterilization power. *99.9% sterilization of viruses and bacteria. 2) Purely Made in Japan Product planning, design, parts, and assembly are all reliably made in Japan. It eliminates complex electronic devices, enhancing durability and usability. Easy and long-lasting. 3) Safe and Secure Reduces the risk of infection associated with cleaning and disinfection wiping tasks. Equipped with a lighting timer, rotating light, and warning buzzer for safe use. 4) All-Directional Sterilization Equipped with four sterilization lamps, it can disinfect spaces, air, and surfaces in a 360° range. *Provides a purification effect equivalent to 60-120 air changes per hour. 5) Easy Maintenance Lamp lifespan is 8,000 hours. Frequent lamp replacement is unnecessary. The lamp can be easily replaced by removing the cover. 6) Maximum Efficiency in a Short Time Significantly reduces the burden of disinfecting floors and equipment, as well as wiping cleaning tasks. Estimated disinfection times are: Approximately 15 minutes for a 6-tatami room. Approximately 20 minutes for an 8-tatami room. *For more details, please refer to the PDF document or feel free to contact us.

• Other lighting equipment

Lightweight and easy to carry! Small and easy to store! This is a compact lighting device that sterilizes viruses and bacteria in all directions using the power of ultraviolet light. *Case studies available.

With six features, it easily and safely disinfects indoor spaces with high efficiency using ultraviolet light. 1) Powerful Disinfection Ability: Uses the most powerful ultraviolet light (UVC) to inactivate viruses and bacteria, achieving a 99.9% disinfection rate. 2) Purely Made in Japan: All aspects of product planning, design, parts, and assembly are safely made in Japan. It eliminates complex electronic devices, enhancing durability and usability for easy long-lasting use. 3) Safe and Secure: Reduces the risk of infection associated with cleaning and disinfection wiping tasks. Equipped with a lighting timer, rotating light, and warning buzzer for safe usage. 4) All-Directional Disinfection: Equipped with four 15W disinfection lamps, it can disinfect spaces, air, and surfaces in a full 360° range. It has a purification effect equivalent to 60-120 air changes per hour. 5) Easy Maintenance: The lamp has a lifespan of 6000 hours, eliminating the need for frequent replacements. The lamp can be easily replaced by removing the cover. 6) Maximum Efficiency in a Short Time: Significantly reduces the burden of disinfecting floors and equipment, as well as wiping cleaning tasks. ★ The effectiveness of the installed ultraviolet lamp against the novel coronavirus (Wuhan strain) has been confirmed. For detailed product information and experimental results, please check the PDF download.

• Other lighting equipment

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

Announcement of participation in the "12th Robot and Aerospace Festival Fukushima 2026 / 5th Drone Summit." 【Date and Time】 　November 27, 2026 (Wednesday) 10:00 AM - 5:00 PM Business Exhibition 　November 28, 2026 (Thursday) 10:00 AM - 4:00 PM General Exhibition 【Venue】 　Big Palette Fukushima (52 Minami 2-chome, Koriyama City, Fukushima Prefecture) 【Exhibits】 　Cardboard Insulated Box 　Craft Cooler Cube