(Free) Instron WEB Seminar Series: Fatigue Testing Machine Series: NEW Electric Drive High Capacity Fatigue Testing Machine ElectroPuls E20000

Supports testing using a constant temperature bath! Reduces energy consumption by minimizing test time.

WaveMatrix utilizes self-heating control software for test specimens to optimize test frequencies, thereby improving the productivity and consistency of tests related to composite materials and polymer materials. It is possible to reduce test time while achieving unprecedented accuracy in test temperatures. This patented system achieves and maintains the specified test temperature by changing the test frequency according to the measurement temperature of the test specimen. In structural composite materials, the impact of a 5°C temperature change is greater than a change in frequency by a factor of two, making the benefits of strict test temperature control significantly higher than moderate frequency variations. 【Features】 ■ User-defined temperature range (controllable up to ±0.5°C) ■ User-defined frequency range ■ Thermocouple data input via USB is possible ■ Analog input of 0-10V for thermocouple data, including infrared thermometers, is possible ■ Thermocouples can be installed according to the shape of the test specimen *For more details, please refer to the PDF document or feel free to contact us.

• Software (middle, driver, security, etc.)
• Other embedded systems (software and hardware)

E20000 has been newly added! Dynamic fatigue testing machine that adopts linear motor technology, eliminating the need for operating oil, energy-saving, and low noise.

"ElectroPuls" is an electric fatigue testing machine that utilizes linear motor technology (patented) based on approximately 13 years of testing experience. It features a wide performance range capable of conducting static tests as well as dynamic and fatigue tests, making it an ideal system for various laboratories and testing facilities. It can also be used for testing biomaterials and medical devices. In addition to a variety of testing accessories, the new "E20000" can perform both dynamic and static tests with a single unit. We offer a lineup of single-axis models up to 10kN and 100Nm, as well as linear/torsion (dual-axis) options. There are three sizes available, allowing you to choose according to your application. Our product meets your testing needs in a simpler, smarter, and safer way. 【Features】 ■ No hydraulic oil required ■ Energy-efficient ■ Low noise ■ Space-saving ■ No complex and costly maintenance required 【Software Used】 WaveMatrix2 *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

Simultaneous testing of up to 16 specimens is possible! Easy access for specimen insertion, preloading, and adjustment.

The "ElectroPuls 16 Station" is a testing system that significantly shortens testing time and contributes to the rapid market introduction of products. It allows simultaneous testing of tensile, compression, and bending tests with up to 16 specimens. Finished products or individual components, such as NiTi single diamond struts, can be uniformly tested at each station due to easy setup and simple preload adjustments. 【Features】 - The use of inline button-type load cells allows for precise adjustment of specimens close to the testing fixture. - There are no alignment errors in the XY axis during adjustments or preload at each station. - Each individual push rod can be adjusted by ±5mm for easy insertion and adjustment of specimens. - Anyone can accurately apply uniform preload across all 16 stations. - No specialized knowledge is required. *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic linear load capacity ±10kN / dynamic torque capacity ±100Nm! The required floor space for the frame is less than 0.8m².

The E10000 is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring linear-torsion type technology. It is equipped with advanced digital control electronics from Instron, a Dynacell load cell for biaxial testing, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. **Features** - Oil-free linear motor technology that maintains a clean state - Separate linear/rotary actuators - Designed for dynamic and static testing of diverse materials and components - High dynamic performance, capable of operating at up to 100Hz - Operates on single-phase main power, no hydraulic or pneumatic sources required *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic linear load capacity ±3000N / static load capacity ±2100N! The required desk space for the frame is less than 0.3, making it compact.

The "ElectroPuls E3000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It operates on single-phase power and does not require additional utilities (such as compressed air, hydraulic power, or cooling water supply) for basic machine operation. Equipped with advanced digital control electronics, DynacellT load cells, console software, and a new testing technique based on the stiffness of the specimen for hassle-free tuning, it features an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented functions. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Unlockable to allow for rotational freedom of the actuator, providing flexibility in testing ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic linear load capacity ±3000N / dynamic torque capacity ±25Nm! The required desk space for the frame is less than 0.3m².

The E3000 is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring a linear-torsion type design. Equipped with advanced digital control electronics, a Dynacell load cell for two axes, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that allows flexible test configurations, and many other user-oriented features. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. **Features** - Oil-free linear motor technology that maintains a clean state - Separate linear/rotary actuators - Designed for dynamic and static testing of diverse materials and components - High dynamic performance, capable of operating at over 100 Hz - Dynamic linear load capacity: ±3000 N / Dynamic torque capacity: ±25 Nm *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

A variety of hydraulic servo testing systems with different capacities and applications, along with a wide range of applications and fixtures!

This catalog introduces the hydraulic servo fatigue testing systems handled by our company. It features a compact tabletop model "8872 (25 kN)" that meets the high demands of various static and dynamic testing requirements, as well as "8803 (500 kN)" and the controller electronics "8800MT." We also showcase a wealth of applications, so please take a look. 【Featured Products (Excerpt)】 ■ 8872 (25 kN) Fatigue Testing System ■ 8874 (25 kN/100 Nm) Fatigue Testing System ■ 8801 (100 kN) Fatigue Testing System ■ 8862 (100 kN) Low Cycle Fatigue Testing System ■ 8802 (250 kN) Fatigue Testing System *For more details, please refer to the PDF document or feel free to contact us.

• Hydraulic Equipment
• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic load capacity maximum ±10kN / Static load capacity ±7kN! The required floor space for the frame is less than 0.8m², making it compact.

The "ElectroPuls E10000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. Equipped with Instron's advanced digital control electronics, Dynacell load cells, console software, and a new testing technique based on the stiffness of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at up to 100Hz ■ Operates on single-phase main power, no hydraulic or pneumatic sources needed ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

Dynamic load capacity ±1000N / Static load capacity ±710N! The required desk space for the frame is less than 0.15m².

The "ElectroPuls E1000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It features advanced digital control electronics from Instron, Dynacell load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented functions. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state (patented) ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Dynamic load capacity: ±1000 N / Static load capacity: ±710 N ■ Operates on single-phase main power, no hydraulic or pneumatic sources needed *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

This is a testing machine with a newly added 20 kN dynamic linear capacity and a torque capacity of 130 Nm in the ElectroPuls series.

The electric-driven testing machine 'E20000 Linear Torsion' has twice the linear capacity of the conventional E10000 system, while the overall size of the testing machine remains almost the same. With the latest patented automatic electric crosshead clamp, size adjustments of the testing space can be made quickly and easily. Like existing products, it incorporates Instron's advanced digital control electronics, dual-axis Dynacell(TM) load cells, and a patented simple tuning technology based on the rigidity of the test specimen. 【Performance】 ■ Linear dynamic load capacity: 20 kN (4,500 lbf) ■ Torsional dynamic load capacity: 130 Nm (1150 in-lb) ■ Stroke: 75 mm (2.95 in) ■ Optical encoder: Accurate digital expansion/rotation (5 nm resolution) ■ High dynamic performance: Up to 100 Hz *For more details, please download the PDF or contact us.

• Testing Equipment and Devices

A high-capacity fatigue testing machine has just been launched by Instron! In addition to a variety of testing accessories, it can perform both dynamic and static tests with a single unit.

The "ElectroPuls E20000" is a testing machine with a dynamic linear capacity of 20kN, newly added to the ElectroPuls series. It utilizes Instron's advanced digital control electronics, Dynacell load cells, and a simple tuning technique based on the stiffness of the test specimen. With the automatic electric crosshead clamp, adjusting the size of the test space can be done quickly and easily. 【Features】 ■ Adoption of linear motor technology ■ Supports maximum load capacity of 20kN in the ElectroPuls series ■ Automatic electric crosshead lift and clamp ■ Easy setup with intuitive software (WaveMatrix2) ■ Stiffness-based tuning ■ Quiet operation ■ Oil-free design ■ Compact footprint *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

About ROAD: The "Roundtable on the Purpose of Autonomous Driving (ROAD)" conference series has evolved into a unique platform for interdis-ciplinary dialogue and international collaboration in the field of autonomous driving and autonomous mobility. Established in 2016, ROAD has brought together researchers, industry leaders, and public sector stakeholders from six countries across three continents. Based on this background, the upcoming ROAD 2026 will focus on "safety” and "driving AI”—the final pieces of the autonomous driving puzzle—to advance discussions on establishing the foundational framework for ensuring safety quality and obtaining regular-tory approval for autonomous driving. We also intend to discuss the international commonalities and differences regarding the social value brought about by ADS vehicles in terms of automation, intelligent driving, and mobility. We have established a total of five compelling themes for the Round Workshops, consisting of two topics related to “The Last Piece” and three topics related to the social value of ADS, as shown below. 1) Round Workshop 1 - Horizons of E2E Driving AI → Can AI Understand the Driving Environment Like Humans? 2) Round Workshop 2 - Beyond the Unknown: Safety Cases for ADS → Can Safety Ever Be Proven? 3) Round Workshop 3 - Envisioning Smart City Mobility → Can Smart City Mobility Bridge the Mobility Divide? 4) Round Workshop 4 - Logistics Enhancement Through Autonomous Tracking → Will Logistics Become Human-Free? 5) Round Workshop 5 - The Evolution of CASE: SDV/AIDV → Will Automakers Become AI Companies? We hope you’ll all join us!

[Speaker] Masashi Sugita, President and CEO of LEX Style Co., Ltd. [Key Lecture Content] The power consumption of AI servers used in data centers has significantly increased, making traditional air cooling insufficient for operation. This lecture will organize the requirements for introducing a liquid cooling system into air-cooled data centers and explain the implementation method using free cooling with specific design details. When handling high-density AI servers, energy efficiency is required, and the widely used energy efficiency indicator, as well as the Ministry of Economy, Trade and Industry's Resource and Energy Agency's PUE regulation of "1.3 or below," will be explained along with practical operational insights. [Lecture Items] 1. Heat dissipation methods for high-density, high-heat AI servers 2. Basics and importance of PUE/pPUE 3. PUE regulation of "1.3 or below" by the Ministry of Economy, Trade and Industry's Resource and Energy Agency 4. AI server implementation and requirements for new data centers 5. Summary and future outlook 6. Q&A / Business card exchange

[Key Lecture Content] 1. Promotion of SAF Introduction Yasushi Yamashita, Director, Carbon Neutral Promotion Office, Aviation Bureau, Ministry of Land, Infrastructure, Transport and Tourism 1. Importance of SAF in the decarbonization of the aviation sector 2. Initiatives to promote the introduction of SAF 3. Q&A / Business card exchange 2. Japan Airlines' Challenge Towards Net Zero CO2 Emissions by 2050 Kazuki Hirotani, Group Leader, GX Planning Group, Sustainability Promotion Department, Japan Airlines Co., Ltd. 1. Introduction of our five initiatives for CO2 emission reduction 2. Initiatives for reducing fuel consumption (introduction of fuel-efficient aircraft, operational improvements) 3. Initiatives for fuel transition (sustainable aviation fuel SAF) 4. Initiatives for reductions outside the value chain (carbon credits, new removal technologies) 5. Initiatives to deepen collaboration with society 6. Q&A / Business card exchange

[Instructor] Yuichiro Kabushiki, Partner Lawyer at TMI Comprehensive Law Office [Key Lecture Content] With the spread of AI, there is growing attention on the civil liability of developers, providers, and users of AI. The Ministry of Economy, Trade and Industry will publish "Guidelines on the Interpretation and Application of Civil Liability in AI Utilization" in April 2026, and the Ministry of Justice will also establish an expert meeting to examine civil liability related to unauthorized use of images and voices generated by AI in the same month. As the full enforcement of the AI Promotion Act and the revision of AI guidelines are underway, it is necessary to design and operate governance based on the potential responsibilities that may arise retrospectively. In this seminar, based on the guidelines from the Ministry of Economy, Trade and Industry and drawing on litigation practice experience as a judge and lawyer, we will organize the basic framework for assessing civil liability and explain fundamental methods for designing and operating governance based on risk analysis. Furthermore, we will examine the framework for civil liability and the design and operation of governance using hypothetical cases that are likely to pose practical issues.

In this seminar, we will welcome Mr. Satoru Hayami from Waseda University, who will explain the latest trends in AI utilization in manufacturing, as well as the evolution of technologies such as agent-based AI and physical AI, and the opportunities and key points for practical application in the manufacturing industry. Furthermore, Mr. Tsubasa Shibata, representative of Next Opt, will introduce processes aimed at practical implementation, incorporating actual case studies from manufacturing sites. We hope you will envision the "potential for AI utilization in your company" and take home hints that will lead to improvements in your operations starting tomorrow. We look forward to your participation.