Are you looking for high-quality stainless steel processing? Notification of product information update.

We can handle everything from small items to large ones! We accept high-difficulty stainless steel welding.

Stainless steel comes in martensitic, austenitic, ferritic, and duplex stainless steel (austenitic-ferritic) types, each with different characteristics, making welding difficult. Our company has a proven track record of welding various types of stainless steel, and we can accommodate a wide range of processing from palm-sized to large fabrication sizes. The thickness ranges from 0.5mm, with TIG welding capable of handling thicker materials up to 9mm, and for even thicker materials, we can propose multi-layer welding or semi-automatic welding as needed. [Features] ■ Proven track record of welding various types of stainless steel ■ Wide range of processing capabilities from palm-sized to large fabrication sizes ■ Proposals for multi-layer welding or semi-automatic welding as needed ■ Welding level compatible with nuclear products *For more details, please refer to the PDF materials or feel free to contact us.

• Contract manufacturing

Width 4.8m × Depth 7.5m × Height 2.8m, capable of accommodating up to approximately 5 tons!

We would like to introduce the equipment of Shoei's "Shot Blast Work Area W4800xL7500xH2800." With dimensions of W4800×L7500×H2800, it can accommodate up to approximately 5 tons. The work area is equipped with two 4.8-ton cranes, providing good operability for tasks such as turning. There is also a painting booth within the same building, allowing for painting (natural drying) as well. 【Specifications】 ■ Material: Steel ■ Lot: 1 to 100 units ■ Precision: Others *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

The maximum diameter is a proven 600A! We handle everything from material procurement to can manufacturing, welding, finishing, and stress relieving.

We would like to introduce a case study of the "SUS304 Stainless Steel Piping Welding and Pressure Test" conducted by Shoei. We handle everything from material procurement, fabrication, welding, finishing, to stress relieving for piping. The maximum diameter we have achieved is 600A. Please feel free to contact us when you need our services. 【Specifications】 ■ Material: Steel, Aluminum, Stainless Steel ■ Lot: 1 to 100 pieces *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

A Rough Overview Company Introduction Movie

A professional video showcasing Shoei's craftsmanship. With powerful visuals of the manufacturing process and scenes filled with charm, this video is recommended for those who love craftsmanship.

• Contract manufacturing

Approximately 2800 x 2800!! In-house integrated production from drawing development to can manufacturing, welding, shot blasting, and painting.

We would like to introduce a case of "large fabricated airtight ducts" carried out by Shoei. The size is approximately 2800 x 2800 for large equipment ducts. We provided integrated production from material selection to fabrication welding, shot blasting, and painting. Please feel free to contact us when you need our services. 【Specifications】 ■ Material: Steel ■ Lot: 1 to 100 pieces ■ Precision: ±1cm or more (for large processing) *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

You can download the catalog of the can manufacturing company "Shoei" all at once.

Showei, a large can manufacturing company with a 20-ton crane. We produce everything in-house, from precision sheet metal to painting. Our manufacturing, supported by quality and management systems capable of handling nuclear products, will meet your expectations with "safety and satisfaction." We have compiled materials related to Showei and will present them to you. Please find them at the download link below.

• Contract manufacturing

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

There are times when people think, "A wooden mat is weak against rain, isn't it?" The Hyper CLT mat is a lightweight wooden mat that utilizes wood CLT and is used even at civil engineering sites during rainy weather. By laying it down in temporary roads, access routes, heavy machinery work yards, and material storage areas, it helps reduce the area where vehicles and heavy machinery run directly on muddy ground, ensuring smooth movement on site. The 5×10 panel weighs about 230 kg, making it relatively lightweight and easy to install, remove, or relocate according to weather conditions and construction progress. Of course, it is important to check site conditions such as ground stability, slope, mud, slipping, and shifting during rainy weather. The Hyper CLT mat is a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." As a lightweight wooden mat that combines wood, NETIS, civil engineering, and CLT, it offers a new option to support the ground at the site even on rainy days.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in a single molding process. This allows for the verification of multiple types in a short period.