Hired at the Ginza Salon! Toilet odor and infection control 'Marun Ventilation'

An invisible ultra-clean toilet space for your facility! The Ginza Salon has adopted a toilet ventilation system that enables the realization of secure restrooms for commercial environments and accommodation facilities.

We are pleased to announce that our company has launched a new package called "Beauty Air ~By Marun Ventilation~," which is customized for high-end commercial environments and accommodation facilities. Production supervision: Medisync Co., Ltd. and Switch Lab Co., Ltd. General distributor: Chosokobo Co., Ltd. In the future, we plan to expand sales through agents and direct sales to beauty salons, clinics, and restaurants targeting high-end customers, and we will also begin recruiting sales agents simultaneously. Additionally, prior to this launch, we installed a premium version at the top salon "Aio-N GINZA" located in Ginza, Chuo-ku, Tokyo, hosted by Masayuki Tsuchiya. For more details, please refer to the press release below. *For more information, please download the materials or check the press release below.

• others

With an overwhelming amount of ultraviolet light, the UVC sterilization lamp destroys the DNA of airborne bacteria, viruses, and mold.

The self-moving air purification device "UVC Air Sterilizer" captures viruses, bacteria, and mold spores from the air and disinfects them with powerful ultraviolet light (UVC). It effectively disinfects by destroying and inactivating the DNA of the bacteria, rather than just supplementing disinfection. With casters, it is easy to move and can be relocated for disinfection in necessary areas. Additionally, it features a safety design where the UVC lamp turns off during door openings or in the event of a fall due to any cause. There is no concern about resistant bacteria since it does not use chemicals. 【Features】 ■ Equipped with three safety devices for peace of mind and comfort ■ Contains the number one germicidal lamp in the U.S. ■ Easy to move and install with casters ■ No odor, no maintenance required *For more details, please refer to the PDF document or feel free to contact us.

• others

98% removal rate of viruses and airborne bacteria! Utilized in indoor facilities such as medical institutions, schools, and welfare facilities.

"AEGIS360" emits ultraviolet light in a horizontal direction at 360 degrees, utilizing updrafts and natural convection to significantly improve indoor air quality. Since it does not emit ultraviolet light in areas where people are present, it can be used even in indoor environments where people are active 24 hours a day. Using a UV-C lamp that emits a wavelength of 253.7 nm, which is said to be highly effective in suppressing the growth of bacteria and viruses, it demonstrates significant environmental improvement against many viruses and bacteria. 【Features】 ■ Can emit ultraviolet light even in occupied indoor spaces ■ Uses UV-C lamps with extremely low output attenuation and long lifespan ■ Emits 253.7 nm ultraviolet light in a 360-degree pattern ■ Suppresses the growth of many viruses and bacteria ■ Effective over a wide area even with just one unit *For more details, please refer to the PDF document or feel free to contact us.

• others

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

When it rains, problems at construction sites such as muddy access roads, rough ground conditions, and reduced mobility of heavy machinery and vehicles increase significantly. One solution that can be utilized even in rainy conditions is the wooden lightweight mat "Hyper CLT Mat," made from CLT (Cross Laminated Timber). By laying it down on temporary roads, access routes, heavy machinery work yards, and material storage areas, it reduces the area where vehicles run directly on the ground, serving as a countermeasure against mud and muck. The 5×10 panel weighs about 230 kg, making it relatively light and easy to install, remove, or relocate in accordance with the progress of construction. Furthermore, it can be proposed for use in public works as a new technology registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." The wooden lightweight mat, combining wood, NETIS, civil engineering, and CLT, is an option that supports the footing of sites where conditions can change easily due to weather.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

● What is a packaging container air leak test device? It is a leak testing device that identifies the peeling, tearing, and presence of pinholes in packaging containers for pharmaceuticals and other products, conducting a Container Closure Integrity Test (CCIT). It can be applied to a wide variety of packaging containers, including flexible packaging, bottle containers, and glass containers, primarily in pharmaceutical packaging. The measurement method employs the <sealed chamber method (pressure change leak testing method 1)>. A sample is placed in the chamber, and by applying pressure or vacuum and measuring the pressure change within the chamber, quantitative inspection is performed. It can be used in various scenarios, including offline manufacturing, inline manufacturing, CMC laboratories, quality control laboratories, and stability testing. * The containers subject to inspection are referred to as "work" or "samples." Here, specific samples are referred to as "samples" to differentiate the terminology.